LOW CARBON ARCHITECTURAL DESIGN

Year 2018, Volume: 31 Issue: 1, 13 - 23, 01.03.2018

Şaziye Balku , Filiz Koçyiğit

Abstract

Tendency towards sustainable energy resources
is increasing and leading engineers and architects make joint efforts.
Renewable energy potential present in nature can be used more efficiently so
that while energy consumption is reducing, rate of energy gain, on the other
hand, increases by architectural design methods. A sailing club in Gölbaşı,
Ankara is designed as a low carbon building for optimum usage of solar and wind
energy. It can be concluded using an energy efficient architectural design for
a building before its construction makes it possible to meet the electrical and
heat energy requirements at minimum cost and environmental friendly.

Keywords

Energy efficient design, trombe wall

References

• Bulut, Y. M., Yıldız, Z., “Comparing Energy Demand Estimation Using Various Statistical Methods: The Case of Turkey”, GU J Sci 29(2):237-244 (2016).
• Fırat, S., “Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction”, J Polytechnic Vol: 17 No: 1 (Special Issue) 1-2, (2014).
• Sassi P. “Strategies for Sustainable Architecture”, p.238, New York: Taylor& Francis INC. (2006).
• Marszal, A. J. & Heisenberg, P. “A Literature Review of Zero Energy Buildings (ZEB) Definitions”, Aalborg: Department of Civil Engineering, Aalborg University, (DCE Technical Reports; No. 78) (2009).
• Konters, J, “Planning for Solar Buildings in Urban Environments”, Doctoral Thesis, Lund University, Department of Architecture and Built Environment, Lund, Sweden. (2015),
• TS EN ISO 13790 “Energy performance of buildings - Calculation of energy use for space heating and cooling”. https://www.iso.org/obp/ui/#iso:std:iso:13790:ed-2:v1:en.
• Ruiz-Pardo, A., Dominguez, S.A., and Fernandez J.A.S. “Revision of the trombe wall calculation method proposed by UNE-EN ISO 13790”, Energy and Building 42, 763-773 (2010).
• Yılmaz, Z. and Kundakçı, A. B., “An approach for energy conscious renovation of residential buildings in İstanbul by Trombe wall system”, Building and Environment 43, 508-517 (2008).
• Y. Yıldız, “Impacts of Climate Change on Heating and Cooling Loads in Residential Buildings” GU J Sci 29(1):27-34 (2016).
• Jiang, B. Ji J., Yi Hua, “The influence of PV coverage ratio on thermal performance of photovoltaiv-trombe wall”. Renew Energy 33 (2008) 2491-2498
• Yunez-Cano A., Gonzales-Huerta R. de G., Tufino-Velazquez M., Barbosa R., B. Escobar, “Solar-hydrogen hybrid system integrated to a sustainable house in Mexico”, Int J Hydrogen Energy 41(2016) 19539-19545.
• Munchi A. Sampath W., “CdTe Photovoltaics for Sustainable Electricity Generation”, J Electronic Materials, 45 (9) 2016.
• http://www.ankara.climatemps.com/
• Renewable Energy General Directorate. http://www.eie.gov.tr/MyCalculator/pages/ 6.aspx
• Scherer, H.F., Pasamontes M., Guzman J.L. Alvarez, J.D., Normey-Rico, “Efficient building energy management using distributed model predictive control”, J Process Control (24) 740-749(2014).
• Energy Efficient Architectural Design, Atılım University LAP Project ATÜ-LAP-C-1516-01 (2015-2016).
• Incropera, F.P., Dewitt, D.P., Bergman, T. L., and Lavine, A.S., “Principles of Heat and Mass Transfer”, Seventh Edition, Wiley. Singapure, (2013).
• Çengel, A. Y. “Heat and Mass Transfer. A Practical Approach”, Third Edition, Mc-Graw Hill, (2007) New York.
• Turkish Republic Ministry of Forest and Water Affairs, Meteorology General Directorate, Global solar radiation and temperature measurements (2012).
• The Mathworks. The language of technical computing, www.mathworks.com. (03.03.2016).