Gas Turbine Performance Monitoring and Operation Challenges: A Review

Year 2023, Volume: 36 Issue: 1, 154 - 171, 01.03.2023

Samar Taha Firas Ismail Sivadass Thiruchelvam

https://doi.org/10.35378/gujs.948875

Cited By: 1

Abstract

Gas turbines efficiently produce high amounts of electrical power hence they have been widely deployed as dependable power generators. It has been detected that the performance of gas turbines is a function of plenty of operational parameters and environmental variables. The impacts of those variables on the said performance can be mitigated using powerful monitoring techniques. Thus, extra maintenance costs, component defect costs, and manpower costs can be illuminated. This paper has enlisted the factors impacting gas turbine efficiency. It has also reviewed multiple monitoring solutions for the said impacting factors, It has been concluded that all types of sensors have ignored errors in their work, which may exacerbate the problems of malfunctions in gas turbines due to the critical environment in which they operate (heat, fumes, etc.); however, the machine learning-based monitoring systems excel in addressing such problems. The most cost-effective and accurate monitoring task can be achieved by using machine learning and deep learning tools.

Keywords

Fault, Gas Turbine, Machine learning, Swirl, Sensor

References

• [1] Li, J., Ying, Y., "A Method to Improve the Robustness of Gas Turbine Gas-Path Fault Diagnosis Against Sensor Faults", IEEE Transactions on Reliability, 67: 3–12, (2018).
• [2] Yazdani, S., Salimipour, E., Moghaddam, M.S., "A comparison between a natural gas power plant and a municipal solid waste incineration power plant based on an energy analysis", Journal of Cleaner Production, 274: 123158, (2020).
• [3] Liang, Y., Cai, L., Guan, Y., Liu, W., Xiang, Y., Li, J., He, T., "Numerical study on an original oxy-fuel combustion power plant with efficient utilization of flue gas waste heat", Energy, 193: 116854, (2020).
• [4] Bao, J., Zhang, L., Song, C., Zhang, N., Guo, M., Zhang, X., "Reduction of efficiency penalty for a natural gas combined cycle power plant with post-combustion CO2 capture: Integration of liquid natural gas cold energy", Energy Conversion and Management, 198: 111852, (2019).
• [5] Matjanov, E., "Gas turbine efficiency enhancement using absorption chiller. Case study for Tashkent CHP", Energy, 192: 116625, (2020).
• [6] Kwon, H.M., Kim, T.S., Sohn, J.L., Kang, D.W., "Performance improvement of gas turbine combined cycle power plant by dual cooling of the inlet air and turbine coolant using an absorption chiller", Energy, 163: 1050–1061, (2018).
• [7] Hashmi, M.B., Majid, M.A.A., Lemma, T.A., "Combined effect of inlet air cooling and fouling on performance of variable geometry industrial gas turbines", Alexandria Engineering Journal, 59: 1811–1821, (2020).
• [8] Guteša Božo, M., Valera-Medina, A., Syred, N., Bowen, P.J., "Fuel quality impact analysis for practical implementation of corn COB gasification gas in conventional gas turbine power plants", Biomass and Bioenergy, 122: 221–230, (2019).
• [9] Caposciutti, G., Baccioli, A., Ferrari, L., Desideri, U., "Impact of ambient temperature on the effectiveness of inlet air cooling in a co-digestion biogas plant equipped with a mGT", Energy Conversion and Management, 216: 112874, (2020).
• [10] Majdi Yazdi, M.R., Ommi, F., Ehyaei, M.A., Rosen, M.A., "Comparison of gas turbine inlet air cooling systems for several climates in Iran using energy, exergy, economic, and environmental (4E) analyses", Energy Conversion and Management, 216: 112944, (2020).
• [11] Sanchez, E.Y., Represa, S., Mellado, D., Balbi, K.B., Acquesta, A.D., Colman Lerner, J.E., Porta, A.A., "Risk analysis of technological hazards: Simulation of scenarios and application of a local vulnerability index", Journal of Hazardous Materials, 352: 101–110, (2018).
• [12] Volponi, A.J., "Gas turbine engıne health management past, present and future trends ", Journal Eng Gas Turbines Power, 136: 1–25, (2017).
• [13] Lu, F., Jiang, J., Huang, J., Qiu, X., "An iterative reduced KPCA hidden markov model for gas turbine performance fault diagnosis", Energies, 11: 1–21, (2018).
• [14] Dong, M., He, D., "Hidden semi-Markov model-based methodology for multi-sensor equipment health diagnosis and prognosis", European Journal of Operational Research, 178: 858–878, (2007).
• [15] Pourbabaee, B., Meskin, N., Khorasani, K., "Sensor Fault Detection, Isolation, and Identification Using Multiple-Model-Based Hybrid Kalman Filter for Gas Turbine Engines", IEEE Transection, Control System Technology 24: 1184–1200, (2016).
• [16] Salahshoor, K., Kordestani, M., Khoshro, M.S., "Fault detection and diagnosis of an industrial steam turbine using fusion of SVM (support vector machine) and ANFIS (adaptive neuro-fuzzy inference system) classifiers", Energy, 35: 5472–5482, (2010).
• [17] Chen, K.Y., Chen, L.S., Chen, M.C., Lee, C.L., "Using SVM based method for equipment fault detection in a thermal power plant", Computers in Industry, 62: 42–50, (2011).
• [18] Lemma, T.A., Hashim, F.M., “Wavelet analysis and auto-associative neural network based fault detection and diagnosis in an industrial gas turbine”, BEIAC 2012 - 2012 IEEE Business, Engineering & Industrial Applications Colloquium, 978: 103–108, (2012).
• [19] Chen Jiao, Wang Yong-hong, W.S., “Application of wavelet singular entropy in periodic fault detection of sensors on gas turbine”, Noise and Vibration Control, 31: 103-108, (2011).
• [20] Zhang, Z., Weng, S.L., Wang, Y.H., “Application of wavelet analysis in fault diagnosis with gas-turbine sensors”, Dongli Gongcheng/Power Engineering, 26: 245-250, (2006).
• [21] Yu, B., Liu, D., Zhang, T., “Fault diagnosis for micro-gas turbine engine sensors via wavelet entropy”, Sensors, 11: 9928–9941, (2011).
• [22] Sina Tayarani-Bathaie, S., Sadough Vanini, Z.N., Khorasani, K., “Dynamic neural network-based fault diagnosis of gas turbine engines”, Neurocomputing, 125: 153–165, (2014).
• [23] Jiao, C., Yong-hong, W., Shi-lie, W., “Application of general regression neural network in fault detection of exhaust temperature sensors on gas turbines”, Proceedings of the CSEE, 32: 92–97, (2009).
• [24] Lu, F., Jiang, J., Huang, J., “Gas Turbine Engine Gas-path Fault Diagnosis Based on Improved SBELM Architecture”, International Journal Turbo Jet Engines, 35: 351-363, (2016).
• [25] Matuck, G.R., Barbosa, J.R, Bringhenti C., Lima I., “Multiple faults detection of gas turbine by mlp neural network”, American Society of Mechanical Engineers, 48821: 1–7, (2017).
• [26] Navi, M., Davoodi, M.R., Meskin, N. “Sensor fault detection and isolation of an industrial gas turbine using partial kernel PCA”, IFAC-PapersOnLine, 28: 1389–1396, (2015).
• [27] Zhang, Y., Bingham, C.M., Yang, Z., Gallimore, M., Ling, W.K., “Sensor fault detection for industrial gas turbine system by using principal component analysis based y-distance indexes”, Processing 2012 8th International Symposium on Communication Systems, Networks and Digital Signal Processing (CSNDSP), Poznan, Poland, 1–6, (2012).
• [28] Jan, S.U., Member, S., Lee, Y.D., Shin, J., Koo, I., “Sensor Fault Classification Based on Support Vector Machine and Statistical Time-Domain Features”, IEEE Access, 5: 8682-8690, (2017).
• [29] Camerini, V., Coppotelli, G., Bendisch, S., “Fault detection in operating helicopter drivetrain components based on support vector data”, Aerospace Science and Technology, 73: 48-60, (2017).
• [30] Ren, L., Ye, Z., Zhao, Y., “A modeling method for aero-engine by combining stochastic gradient descent with support vector regression”, Aerospace Science and Technology, 99: 105775, (2020).
• [31] Evaluations, E., Rinaldi, F., “Exergetic, Economic, and Environmental Evaluations and Multi-objective Optimization of an Internal-Reforming SOFC-Gas Turbine Cycle Coupled with a Rankine Cycle”, Applied Thermal Engineering, 108: 833-846, (2016).
• [32] Wojcik, W., “Energy applications in industry”, Fuel Energy Abstracts, 44: 37–40, (2003).
• [33] Hanachi, H., Liu, J., Kim, I.Y., Mechefske, C.K., “Hybrid sequential fault estimation for multi-mode diagnosis of gas turbine engines”, Mechanical Systems and Signal Processing, 115: 255–268, (2019).
• [34] Talebi, S.S., Tousi, A.M., “The effects of compressor blade roughness on the steady state performance of micro-turbines”, Applied Thermal Engineering, 115: 517–527, (2017).
• [35] Urban, L., A., “Gas turbine engine parameter interrelationships”, 2nd Edition, Hamilton Standard Division of United Aircraft Corporation, United States, 53, (1969).
• [36] Safiyullah, F., Sulaiman, S.A., Naz, M.Y., Jasmani, M.S., Ghazali, S.M.A., “Prediction on performance degradation and maintenance of centrifugal gas compressors using genetic programming”, Energy, 158: 485–494, (2018).
• [37] Kang, D.W., Kim, T.S., “Model-based performance diagnostics of heavy-duty gas turbines using compressor map adaptation”, Applied Energy, 212: 1345–1359, (2018).
• [38] Sogut, M.Z., Yalcin, E., Karakoc, T.H., “Assessment of degradation effects for an aircraft engine considering exergy analysis”, Energy, 140: 1417–1426, (2017).
• 39] Hanachi, H., Mechefske, C., Liu, J., Banerjee, A., Chen, Y., “Performance-Based Gas Turbine Health Monitoring, Diagnostics, and Prognostics: A Survey”, IEEE Transactions on Reliability, 67: 1340–1363, (2018).
• [40] Tsoutsanis, E., Meskin, N., Benammar, M., Khorasani, K., “A dynamic prognosis scheme for flexible operation of gas turbines”, Applied Energy, 164: 686–701, (2016).
• [41] Dixon, R., “Real-Time Diagnostic Method of Gas Turbines Operating Under Transient Conditions in Hybrid Power Plants”, Journal of Engineering for Gas Turbines and Power, 142: 1–10, (2020).
• [42] Jos, D., Orozco, R., Jos, O., Palacio, C.E., Almaz, O., Pii, O., Date, R., Date, R., Date, A., Jos, D., Orozco, R., Jos, O., Palacio, C.E., Almaz, O., “A new methodology of thermodynamic diagnosis, using the thermoeconomic method together with an artificial neural network (ANN): a case study of an externally fired gas turbine (EFGT)”, Energy, 123: 20-35, (2016).
• [43] Tang, S., Tang, H., Chen, M., “Transfer-learning based gas path analysis method for gas turbines”, Applied Thermal Engineering, 155: 1–13, (2019).
• [44] Korbicz, J., Koscielny, J., M., Kowalczuk, Z., Cholewa, W., “Fault diagnosis: models, artificial intelligence, applications”, 2th Edition, Springer Science and Business Media, New York, 922, (2012).
• [45] Martinez-Garcia, M., Zhang, Y., Wan, J., McGinty, J., “Visually interpretable profile extraction with an autoencoder for health monitoring of industrial systems”, 2019 4th IEEE International Conference Advanced Robotics and Mechatronics (ICARM), Toyonaka, Japan, 649–654, (2019).
• [46] Hermeth, S., “Mechanisms affecting the dynamic response of swirled flames”, PhD thesis, Institut National Polytechnique de Toulouse, France, 1–217, (2012).
• [47] Bulat, G., Jones, W.P., Navarro-Martinez, S., “Large eddy simulations of isothermal confined swirling flow in an industrial gas-turbine”, International Journal of Heat and Fluid Flow, 51: 50–64, (2015).
• [48] Boxx, I., Arndt, C.M., Carter, C.D., Meier, W., “High-speed laser diagnostics for the study of flame dynamics in a lean premixed gas turbine model combustor”, Experiments in Fluids, 52: 555–567, (2012).
• [49] Cadorin, M., Pinelli, M., Vaccari, A., Calabria, R., Chiariello, F., Massoli, P., Bianchi, E., “Analysis of a micro gas turbine fed by natural gas and synthesis gas: Test bench and combustor CFD analysis”, Proceedings of ASME Turbo Expo, 1: 627–636, (2011).
• [50] Muthuraman, S., Twiddle, J., Singh, M., Connolly, N., “Condition monitoring of SSE gas turbines using artificial neural networks. Insight Non-Destructive Test”, Condition Monitoring, 54: 436–439, (2012).
• [51] Ardabili, S.F., Najafi, B., Shamshirband, S., Bidgoli, B.M., Deo, R.C., Chau, K.W., “Computational intelligence approach formodeling hydrogen production: A review”, Engineering Applications of Computational Fluid Mechanics, 12: 438–458, (2018).
• [52] Xie, C., Wang, J., Li, H., Wan, M., Chen, S., “Spatial artificial neural network model for subgrid- scale stress and heat flux of compressible turbulence”, Theoretical & Applied Mechanics Letters, 10: 27–32, (2020).
• [53] Zhao, D., Wang, Y., Liang, D., Ivanov, M., “Performances of regression model and artificial neural network in monitoring welding quality based on power signal”, Journal of Material Research and Technogy, 9: 1231–1240, (2020).
• [54] Altıntaş, O., Aksoy, M., Ünal, E., Akgöl, O., Karaaslan, M., “Artificial neural network approach for locomotive maintenance by monitoring dielectric properties of engine lubricant. Meas”, Journal International Measurement, 145: 678–686, (2019).
• [55] Menke, J.H., Bornhorst, N., Braun, M., “Distribution system monitoring for smart power grids with distributed generation using artificial neural networks”, International Journal Electrical Power Energy System, 113: 472–480, (2019).
• [56] Zhuo, P., Zhu, Y., Wu, W., Shu, J., Xia, T., “Real-time fault diagnosis for gas turbine blade based on output-hidden feedback elman neural network”, Jouranl Shanghai Jiaotong University, 23: 95–102, (2018).
• [57] Zhang, Y., Bingham, C., Garlick, M., Gallimore, M., “Applied fault detection and diagnosis for industrial gas turbine systems”, Intrnational Journal Automation and Computing, 14: 463–473, (2017).
• [58] Amozegar, M., Khorasani, K., “An ensemble of dynamic neural network identifiers for fault detection and isolation of gas turbine engines”, Neural Networks, 76: 106–121, (2016).
• [59] Asgari, H., Chen, X.Q., Morini, M., Pinelli, M., Sainudiin, R., Spina, P.R., Venturini, M., “NARX models for simulation of the start-up operation of a single-shaft gas turbine”, Applied Thermal Engineering, 93: 368–376, (2016).
• [60] Marjani, A., Baghmolai, A.M., “Analytical and numerical modeling of non-isothermal and steady-state gas transportation network and the comparison with the results of artificial neural network(ANN) and fuzzy inference system (FIS)”, Journal of Natural Gas Science and Engineering, 36: 1–12, (2016).
• [61] Nowak, G., Rusin, A., “Using the artificial neural network to control the steam turbine heating process”, Applied Thermal Engineering, 108: 204–210, (2016).
• [62] Nadji, H., Ahmed, H., Abdellah K., A.C., "Faults detection in gas turbine using hybrid adaptive network based fuzzy inference systems”, Diagnostyka, 17: 3–17, (2016).
• [63] Sina Tayarani-Bathaie, S., Khorasani, K.”Fault detection and isolation of gas turbine engines using a bank of neural networks”, Journal Process Control, 36: 22–41, (2015).
• [64] Hamzaoui, Y. El, Rodríguez, J.A., Hernández, J.A., Salazar, V., “Optimization of operating conditions for steam turbine using an artificial neural network inverse”, Applied Thermal Engineering, 75: 648–657, (2015).
• [65] Sadough Vanini, Z.N., Khorasani, K., Meskin, N., “Fault detection and isolation of a dual spool gas turbine engine using dynamic neural networks and multiple model approach”, Information Sciences (Ny), 259: 234–251, (2014).
• [66] Sina Tayarani-Bathaie, S., Sadough Vanini, Z.N., Khorasani, K., ”Dynamic neural network-based fault diagnosis of gas turbine engines”, Neurocomputing, 125: 153–165, (2014).
• [67] Nikpey, H., Assadi, M., Breuhaus, P., “Development of an optimized artificial neural network model for combined heat and power micro gas turbines”, Applied Energy, 108: 137–148, (2013).
• [68] Barad, S.G., Ramaiah, P. V., Giridhar, R.K., Krishnaiah, G., “Neural network approach for a combined performance and mechanical health monitoring of a gas turbine engine”, Mechanical Systems and Signal Processing, 27: 729–742, (2012).
• [69] Bartolini, C.M., Caresana, F., Comodi, G., Pelagalli, L., Renzi, M., Vagni, S., “Application of artificial neural networks to micro gas turbines”, Energy Convers Management, 52: 781–788, (2011).
• [70] Palmé, T., Fast, M., Thern, M., “Gas turbine sensor validation through classification with artificial neural networks”, Applied Energy, 88: 3898–3904, (2011).
• [71] Fast, M., Assadi, M., De, S., “Development and multi-utility of an ANN model for an industrial gas turbine”, Applied Energy, 86: 9–17, (2009).
• [72] Joly, R.B., Ogaji, S.O.T., Singh, R., Probert, S.D., “Gas-turbine diagnostics using artificial neural-networks for a high bypass ratio military turbofan engine”, Applied Energy, 78: 397–418, (2004).
• [73] Gwashavanhu, B., Heyns, P.S., Oberholster, A.J., “Shape principal component analysis as a targetless photogrammetric technique for condition monitoring of rotating machines”, Measurement, 132: 408–422, (2019).
• [74] Roghanchi, P., Kocsis, K.C., “International Journal of Mining Science and Technology Quantifying the thermal damping effect in underground vertical shafts using the nonlinear autoregressive with external input ( NARX ) algorithm”, International Journal of Mining Science and Technology, 29: 0–7, (2018).
• [75] Zhuo, P., Zhu, Y., Wu, W., Shu, J., Xia, T., “Real-Time Fault Diagnosis for Gas Turbine Blade Based on Output-Hidden Feedback Elman Neural Network”, Journal Shanghai Jiaotong University, 23: 95–102, (2018).
• [76] Asgari, H., Chen, X.Q., Morini, M., Pinelli, M., Sainudiin, R., Spina, P.R., Venturini, M., “NARX models for simulation of the start-up operation of a single-shaft gas turbine”, Applied Thermal Engineering, 93: 368–376, (2016).
• [77] Gomez, J.L., Khelf, I., Bourdon, A., André, H., “Angular modeling of a rotating machine in non-stationary conditions : Application to monitoring bearing defects of wind turbines with instantaneous angular speed”, Mechanism and Machine Theory, 136: 27–51, (2019).
• [78] Hadroug, N., Hafaifa, A., Kouzou, A., Chaibet, A., “Dynamic model linearization of two shafts gas turbine via their input / output data around the equilibrium points”, Energy, 120: 1–10, (2016).
• [79] Kobayashi, H., Gotoda, H., Tachibana, S., “Nonlinear determinism in degenerated combustion instability in a gas-turbine model combustor”, Physica A, 510: 345–354, (2018).
• [80] Tahan, M., Muhammad, M., Abdul Karim, Z.A., “A multi-nets ANN model for real-time performance-based automatic fault diagnosis of industrial gas turbine engines”, The Brazilian Society of Mechanical Sciences and Engineering, 39: 2865–2876, (2017).
• [81] Benyounes, A., Hafaifa, A., Guemana, M., “Gas Turbine Modeling Based on Fuzzy Clustering Algorithm Using Experimental Data”, Applied Artificial Intelligence, 30: 29–51, (2016).
• [82] Ben ahmoune, M., Ahmed, H., Guemana, M., “Vibration modelling improves pipeline performance, costs”, Oil Gas Journal, 113: 98–100, (2015).
• [83] Glenn, N., “Aircraft turbine engine control research at NASA Glenn Research Center”, Journal of Aerospace Engineering, 26: 422–438, (2013).
• [84] Sharma, O.P., Epstein, A.H., Greitzer, E.M., “Influence of Compressor Deterioration on Engine Dynamic Behavior and Transient”, Journal of Turbomach, 122: 477–484, (2014).
• [85] Tang, S., Tang, H., Chen, M., “Transfer-learning based gas path analysis method for gas turbines”, Applied Thermal Engineering, 155: 1–13, (2019).
• [86] Bai, M., Liu, J., Chai, J., Zhao, X., Yu, D., “Anomaly detection of gas turbines based on normal pattern extraction”, Applied Thermal Engineering, 166: 114664, (2019).
• [87] Li, J., Ying, Y., “Gas turbine gas path diagnosis under transient operating conditions : A steady state performance model based local optimization approach”, Applied Thermal Engineering, 170: 115025, (2020).
• [88] Liu, J., Li, Z., Hanachi, H., “A physics-based framework for online surface roughness assessment for high-pressure turbines”, Chinese Journal Aeronaut, 34: 135–156, (2020).
• [89] Tahan, M., Tsoutsanis, E., Muhammad, M., Karim, Z.A.A., “Performance-based health monitoring,diagnostics and prognostics for condition-based maintenance of gas turbines : A review”, Applied Energy, 198: 122–144, (2017).
• [90] Litt, J.S., Simon, D.L., “A Survey of Intelligent Control and Health Management”, Journal of Aerospace Computing, Information, a Communication, 1: 543–563, (2004).
• [91] Hanachi, H., Mechefske, C., Liu, J., Banerjee, A., Chen, Y., “Performance-Based Gas Turbine Health Monitoring, Diagnostics, and Prognostics: A Survey”, IEEE Transactions on Reliability, 67: 1340–1363, (2018).
• [92] Wang, C., Li, Y.G., Yang, B.Y., “Transient performance simulation of aircraft engine integrated with fuel and control system”, Thermal Engineering, 114: 1029–1037, (2017).
• [93] Spang, H., A., Brown, H., “Control of jet engines”, Control Engineering Practice, 7: 1043–1059, (1999).
• [94] Connolly, J.W., Chicatelli, A., Garg, S., “Model-based control of an aircraft engine using an optimal tuner approach”, Joint Propulsion Conference & Exhibit, Atlanta, Georgia, 4257: 1–14 (2012).
• [95] Flamm, J.D., Bonet, J.T., " Overview Of ERA Integrated Technology Demonstration (ITD) 51A Ultra-High Bypass (UHB) Integration for Hybrid Wing Body (HWB)”, Aerospace Sciences Meeting, 7: 1–22 (2016).
• [96] Hung, J.Y., Gonzalez, L.F., “Progress in Aerospace Sciences On parallel hybrid-electric propulsion system for unmanned aerial vehicles”, Progress in Aerospace Sciences, 51: 1–17, (2012).
• [97] Dinc, A., “NOx emissions of turbofan powered unmanned aerial vehicle for complete flight cycle”, Chinese Journal Aeronaut, 33: 1683–1691, (2020).
• [98] Adibhatla, S., Ding, J., Technologies, U., Hartford, E., Garg, S., Griffith, S., Karnofski, K., Company, T.B., Payne, N., Simon, D., Wood, B., Hartford, E., Propulsion, A., Management, H., Networked, M., Hardware, C., Architecture, S., Engineer, P., Chief, B., Control, I., Branch, A., Manager, T.P., Controls, H.I., Engineering, P.S., Control, I., Branch, A., Engineer, P., Systems, D., “Propulsion Control Technology Development Needs to Address NASA Aeronautics Research Mission Goals for Thrusts 3a and 4” , Joint Propulsion Conference, Cincinnati, Ohio 4732, (2018).
• [99] Sun, R., Shi, L., Yang, X., Wang, Y., Zhao, Q., “A coupling diagnosis method of sensors faults in gas turbine control system”, Energy, 205: 117999, (2020).
• [100] Perez-vega, R., Kaartemo, V., Lages, C.R., Borghei, N., “Reshaping the contexts of online customer engagement behavior via artificial intelligence : A conceptual framework”, Journal of Business Research, 129: 902–910, (2020).
• [101] Li, C., “Microprocessors and Microsystems Biodiversity assessment based on artificial intelligence and neural network algorithms”, Microprocess, 79: 103321, (2020).
• [102] Sun, R., Shi, L., Yang, X., Wang, Y., Zhao, Q., “A coupling diagnosis method of sensors faults in gas turbine control system”, Energy, 205: 117999, (2020).