Particulate Sol Route Hydroxyapatite Thin Film-Silk Protein Interface Interactions

Year 2010, Volume: 23 Issue: 4, 475 - 485, 29.03.2010

Selçuk Özcan , Muhsin Çiftçioğlu

Abstract

Hydroxyapatite (HAp) thin film coatings were prepared on bioinert glass slides by a particulate sol method and the effects of intermediate silk fibroin and silk sericin coatings on the HAp film formation and surface topography were examined. The films prepared with smaller crushed particle sols had a higher agglomeration tendency during the drying consolidation step of the thin film formation, and contained agglomerates larger in number and size, which was demonstrated experimentally and in accordance with the DLVO theory. In the thin films prepared on intermediate sericin and fibroin films  the number and size of agglomerates were decisively reduced, forming homogeneous films of predominantly primary particles, especially for the larger particle size sols. The regular surface electrostatic potential arrangements of the β-sheet structures of the sericin and fibroin, and of hydroxyapatite crystals, gave rise to the coulombic attraction driven surface energy minimization, enhancing the hydroxyapatite thin film formation process. The positive degree of cooperativity in the hydroxyapatite particle deposition on the silk protein coatings was disrupted by the particle agglomeration tendency.  

Keywords

Hydroxyapatite, Particulate sol, Thin film, Silk sericin, Silk fibroin, Protein adsorption, Agglomeration

References

• Daculsi, G., Laboux, O., Le Geros, R., “Outcome and perspectives in bioactive coatings: what’s new, what’s coming”, ITBM-RBM, 23: 317-325 (2002).
• Albrektsson, T., Johansson, C., “Osteoinduction, osteoconduction and osseointegration, Eur. Spine Jour., 10 (Supp.2):S96-101 (2001).
• Lind, M., Overgaard, S., Bunger, C., Soballe, K., “Improved bone anchorage of hydroxyapatite coated implants compared with tricalcium phosphate coated implants in trabecular bones in dogs”, Biomaterials, 20: 803-808 (1999).
• Best, S.M., Porter, E.A., Thian, E.S., Huang, J., “Bioceramics: past, present and for the future”, J. Eur. Ceram. Soc., 28:1319-1327 (2008).
• Heimann, R.B., “Thermal spraying of biomaterials”, Surface & Coatings Technology, 201: 2012-2019 (2006).
• Radin, S.R., Ducheyne, J., “Plasma spraying induced changes of calcium phosphate ceramic characteristics and the effect on in vitro stability”, J. Mater. Sci. Mater Med., 3: 33-42 (1992).
• Cirilli, F., Kaciulis, S., Mattongno, G., Righini, G., Ferrari, F., Montenero, A., “Surface analysis of biocompatible hydroxyapatite coatings on titanium”, in: Olefjord J, Nyborg L, Briggs D, editors. Proc. ECASIA 97, 7th European Conference on Applications of Surface and Interface Analysis, Chichester, John Wiley and Sons, 151-154 (1997).
• Gross, K.A., Gross, V., Berndt, C.C., “Thermal analysis of amorphous phases in hydroxyapatite coatings”, J. Am. Ceram. Soc., 81: 106-112 (1998).
• Gross, K.A., Berndt, C.C., “Thermal processing of hydroxyapatite for coating production”, J. Biomed. Mater. Res., 39: 580-587 (1998).
• Massaro, C., Baker, M.A., Cosentino, F., Ramires, P.A., Klose, S., Milella, E., “Surface and biological evaluation of hydroxyapatite-based coatings on titanium deposited by different techniques”, J. Biomed. Mater. Res. (Appl. Biomater.), 58: 651-657 (2001).
• Torrisi, L., Foti, G., “Ion sputtering of hydroxyapatite”, Appl. Phys. Lett., 62: 237-239 (1993).
• Gyorgy, E., Toricelli, P., Socol, G., Iliescu, M., Mayer, I., Mihailescu, I.N., Bigi, A., Werckman, J., “Biocompatible Mn doped carbonated hydroxyapatite thin film grown by pulsed laser deposition”, J. Biomed. Mater. Res. Part A, 71A: 353-358 (2004).
• Cotell, C.M., “Pulsed laser deposition and
• processing of biocompatible hydroxyapatite thin films”, Appl. Surf. Sci., 69: 140-148 (1993).
• Wei, M., Ruys, A.J., Milthorpe, B.K., Sorrell, C.C., “Solution ripening of hydroxyapatite nanoparticles: effects on electrophoretic deposition”, J. Biomed. Mater. Res., 45: 11-19 (1999).
• Ducheyne, P., Radin, S., Heughebaert, M.,
• Heughebaert, J.C., “Calcium phosphate ceramic coatings on porous titanium: effect of structure and composition on electrophoretic deposition, vacuum sintering and in vitro dissolution”, Biomaterials, 11: 244-254 (1990).
• Raja, K.S., Misra, M., Paramguru, K., “Deposition of calcium phosphate coating on nanotubular anodized titanium”, Mater. Lett., 59: 2137-2141 (2005).
• Zhitomirsky, I., “Electrophoretic hydroxyapatite coatings and fibers”, Mater. Lett., 42: 262-271 (2000).
• Albayrak, O., El-Atwani, O., Altintas, S., “Hydroxyapatite coatings on titanium substrate by electrophoretic deposition method: effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition”, Surface Coatings Technology, 202: 2482-2487 (2008).
• Ban, S., Maruno, S., “Hydrothermal-electrochemical deposition of hydroxyapatite”, J. Biomed. Mater. Res., 42:387-395 (1998).
• Kuroda, K., Ichino, R., Okido, M., Takai, O., “Hydroxyapatite coating on titanium by thermal substrate method in aqueous solution”, J. Biomed. Mater. Res., 59: 390-397 (2002).
• Manso-Silvan, M., Langlet, M., Jimenez, J.,
• Fernadez, M., Martinez-Duart, J.M., “Calcium phosphate coating prepared by aerosol-gel”, J. Eur. Ceram. Soc., 23: 234-246 (2003).
• Varma, H.K., Yokogawa, Y., Espinosa, F.F.,
• Kawamoto, Y., Nishizawa, K., Nagata, F., Kameyama, T., “Porous calcium phosphate coating over phosphorylated chitosan film by a biomimetic method”, Biomaterials, 20: 879-884 (1999).
• Liu, D.M., Yanh, Q., Troczynski, T., “Sol-gel hydroxyapatite coatings on stainless steel substrates”, Biomaterials, 23: 691-698 (2002).
• Cavalli, M., Gnappi, G., Montenero, A., Bersani, D., Lottici, P.P., Kaciulis, S., Mattogno, G., “Hydroxy and fluorapatite films on Ti alloy substrates: sol-gel preparation and characterization”, J. Mater. Sci., 36: 3253-3260 (2001).
• Gan, L., Pilliar, R., “Calcium phosphate sol-gel derived thin films on porous-surfaced implants for enhanced osteoconductivity, Part I: synthesis and characterization”, Biomaterials, 25: 5303-5312 (2004).
• Gan, L., Wang, J., Pilliar, R.M., “Evaluating interface strength of calcium phosphate sol-gel derived thin films to Ti6Al4V substrates”, Biomaterials, 26: 189-196 (2005).
• Ferraz, M.P., Monteiro, F.J., Manuel, C.M.,
• “Hydroxyapatite nanoparticles: a review of preparation methodologies”, J. Appl. Biomater. Biomech., 2: 74-80 (2004).
• Kim, H.W., Knowles, C.J., Salih, V., Kim, H.E., “Hydroxyapatite and fluor-hydroxyapatite layered film on titanium processed by a sol-gel route for hard tissue implants”, J. Biomed. Mater. Res. (Appl. Biomater.), 71B: 66-76 (2004).
• Bayraktar, O., Malay, O., Ozgarip, Y., Batigun, A., “Silk fibroin as a novel coating material for controlled release of theophylline”, Eur. J. Pharmaceutics and Biopharmaceutics, 60: 373-381 (2005).
• Altman, G.H., Diaz, F., Jakuba, J., Calabro, T., Horan, R.L., Chen, J.,Lu, H., Richmond, J. Kaplan D.L., “Silk-based biomaterials”, Biomaterials, 24: 401-416 (2003).
• Kong, X.D., Cui, F., Wang, X.M., Zhang, M., Zhang, W., “Silk fibroin regulated mineralization of hydroxyapatite nanocrystals”, J Crystal Growth, 270: 197-202 (2004).
• Kong, X.D., Sun, X., Cui, F., Ma, C., “Effect of solute concentration on fibroin regulated biomineralization of calcium phosphate”, Mater. Sci. Eng., C 26: 639-643 (2006).
• Takeuchi, A., Othsuki, C., Miyazaki, T., Kamitakahara, M., Ogata, S.M., Yamazaki, M., Furutani, Y., Kinoshita, H., Tanihara, M., “Heterogeneous nucleation of hydroxyapatite on protein: structural effect of silk sericin”, J. R. Soc. Interface, 2: 373-378 (2005).
• Brinker, C.J., Scherer, G.W., “Sol-gel Science the physics and chemistry of sol-gel processing”, San Diego, Academic Press Inc., 235-301 (1990).
• Dos Santos, E.A., Farina, M., Soares, G.A.,
• Anselme, K., “Surface energy of hydroxyapatite and β-tricalcium phosphate ceramics driving serum protein adsorption and osteoblast adhesion”, J. Mater. Sci: Mater. Med., 19: 2307-2316 (2008).
• Hwang, K.S., Kim, B.H., “Preparation of highly oriented LaNiO3 thin films by spin-coating technique”, Journal of Sol-Gel Science and Technology, 14: 203-207 (1999).
• Chen, Y.C., Sun, Y.M., Lin, C.P., Gan, J.Y., “Enhanced a-axis oriented crystal growth of Nd substituted bismuth titanate thin films with layer by layer crystallization”, Journal of Crystal Growth, 268(1-2): 210-214 (2004).
• Hofmann, S., Wong, Po Foo, C.T., Rossetti, F., Textor, M., Vunjak-Novakovic, G., Kaplan D.L., Merkle, H.P., Meinel, L., “Silk fibroin as an organic polymer for controlled drug delivery”, J. Controlled Release, 111: 219-227 (2006).
• Luo, Q., Andrade, J.D., “Cooperative adsorption of proteins on hydroxyapatite”, J. Colloid and Interface Sci., 200: 104-113 (1998).