İNCE CİDARLI PARÇALARIN MİKRO FREZELENMESİNDE TALAŞ KALDIRMA YOLUNUN TAKIM AŞINMASI, KUVVETLER VE PARÇA KALİTESİ ÜZERİNDEKİ ETKİSİ
Abstract
Bu çalışmada, ince duvarlı parçaların mikro frezelenmesinde talaş kaldırma yolunun takım aşınması ve kuvvetler üzerindeki etkisi incelenmiştir. Ayrıca ince duvarların kalınlığındaki hata ve çapak oluşumu da dikkate alınmıştır. Talaş kaldırma işleminde iki farklı yol seçilmiştir: suyolu ve adım destekli takım yolu. Deneylerde iş parçası malzemesi olarak Ti6Al4V titanyum alaşımı kullanılmıştır ve bu malzeme üzerinde 1 mm yüksekliğinde ve 100 µm kalınlığında ince duvarlar işlenmiştir. Sonuç olarak, adım destekli takım yolunun ince duvarların işlenmesinde daha az kuvvete, çapağa ve kalınlık hatasına neden olduğu, fakat daha yüksek takım aşınmasına neden olduğu bulunmuştur.
Keywords
References
- Li, P., Zdebski, D., Langen, H.H., Hoogstrate, A.M., Oosterling, J.A.J., Schmidt, R.H.M. ve Allen, D.M., “Micromilling of Thin Ribs with High Aspect Ratios”, Journal of Micromechanics and Microengineering, Cilt 20, 1-10, 2010.
- Aijun, T. ve Zhanqiang, L., “Deformations of Thin-Walled Plate due to Static End Milling Force”, Journal of Materials Processing Technology, Cilt 206, 345-351, 2008.
- Gang, L., “Study on Deformation of Titanium Thin-Walled Part in Milling Process”, Journal of Materials Processing Technology, Cilt 209, 2788-2793, 2009.
- Friedrich, C.R. ve Vasile, M.J., “Development of the Micromilling Process for High-Aspect-Ratio Microstructures”, Journal of Microelectromechanical Systems, Cilt 5, 33-38, 1996.
- Bang, Y.-B., Lee, K.-M. ve Oh, S., “5-Axis Micro Milling Machine for Machining Micro Parts”, The International Journal of Advanced Manufacturing Technology, Cilt 25, 888-894, 2005.
- Arnaud, L., Gonzalo, O., Seguy, S., Jauregi, H. ve Peigne, G., “Simulation of Low Rigidity Part Machining Applied to Thin-Walled Structures”, The International Journal of Advanced Manufacturing Technology, Cilt 54, 479-488, 2011.
- Baranek, I., Buransky, I. ve Peterka, J., “Influence of Material Removal Way on Thin-Walled Part Quality by Milling”, MM Science Journal, Cilt 2, 414-417, 2013.
- Annoni, M., Petro, S., Rebaioli, L., Semeraro, Q. ve Solito, R., “Process Parameters Effect on Cutting Forces and Geometrical Quality in Thin Wall Micromilling”, Proceedings of NAMRI/SME, Cilt 41, 1-10, 2013.
Details
Primary Language
Turkish
Subjects
-
Journal Section
-
Authors
Publication Date
December 21, 2016
Submission Date
August 13, 2016
Acceptance Date
-
Published in Issue
Year 2016 Volume: 4 Number: 4
