-

Abstract

In this study, Boron Nitride Nanotubes (BNNTs) were synthesized using a ball-milling and annealing method. Starting powder was used as the amorphous boron powder and in a planetary ball mill (FritschPulverisette 7 Premium Line) was ball milled for 2 hours under nitrogen atmosphere. After milling process, obtained powders were annealed under NH3+N2 flow at 1300ᴼC for different time as 2,4,6 hrs in tube furnace

Keywords

• Boron Nitride Nanotubes , Ball Milling

YÜKSEK ENERJİLİ BİLYELİ ÖĞÜTME VE TAVLAMA YÖNTEMİ İLE BOR NİTRÜR NANO TÜPLERİN SENTEZLENMESİNE TAVLAMA SÜRESİNİN ETKİSİ

Abstract

Keywords

• Bor Nitrür, Nano Tüp,Öğütme

References

1. 1. Zhang H., Chen Y., “Boron Nitride Nanotubes:Synthesis and Structure” ,Department of Electronic Materials Engineering,Research School of Physical Sciences and Engineering,The Australian National University, Canberra, Australia (2000).
2. 2. Chopra N.G.,Luyken R.J., Cherrey K., Crespi V.H., Cohen M.L,Louie S.G., Zettl A., Science 269:966 (1995).
3. 3. Golberg, D., Bando, Y., Eremets, M., Takemura, K., Kurashima, K., Tamiya, K., And Yusa, H., “Boron Nitride Nanotube Growth Defects And Their Annealing-Out Under Electron Đrradiation”, Chem. Phys. Lett., 279, 191–196 (1997).
4. 4. Lee R.S., Gavillet, J., Chapelle M.L., Loiseau A., Cochon J.L., Pigache D., Thibault J., And Willaime F., “Catalyst-Free Synthesis Of Boron Nitride Single-Wall Nanotubes With A Preferred Zigzag Configuration”, Phys. Rev. B, 64, 121405 (2001).
5. 5. Arenal R.,Stephan O.,Cochon J.L,Loiseau A., , “The Root Growth Mechanismfor Single-Walled Boron Nitride Nanotubesvaporization Technique” ,J. Am Cham. Soc.,129,16183-16189 (2007).
6. 6. Lourie O. R., Jones C.R. and Buhro W.E., “CVD Growth Of Boron Nitride Nanotubes” Departments Of Chemistry And Physics, Washington university, St. Louis, Missouri, ,Chem. Mater., 63130-4899 (2000).
7. 7. Ma R., Bando Y., Sato T., Kurashima K., “Growth, Morphology, And Structure of BN Nanotubes”, Chem. Mater., 13, 2965-2971 (2001).
8. 8. Zhi C.Y., Bando Y., Tang C.C., Golberg D., ,Solid State Communications 135 67 (2005).

9. 9. Terauchi M., Tanaka M., Matsuda H., Takeda, M., And Kimura, K., “Helical Nanotubes Of Hexagonal Boron Nitride, J. Electron Microsc., 46, 75–78 (1997).
10. 10. Tang C. C., Bando Y., Sato T., Kurashima K., “A Novel Procursor For Synthesis At Pure Boron Nitride Nanotubes”, Chemical Communications,1290-91 (2002).
11. 11. Chen Y.,Williams J.S.,”Synthesis Of Boron Nitrides Nano Tubes Using A Ball-Milling And Annealing Method”, Nano Engineering And Structures Functional And Smart Materials,82- 207(2006).
12. 12. Y. Chen, M. Conway, And J.S. Williams,”LargeQuantity Production of High-Yield Boron Nitride Nanotubes” Department of Electronic Materials Engineering, Research School of Physical Sciences And Engineering, The Australian National University, Canberra, ACT 0200, Australia,(2002).
13. 13. Chadderton L.T, Chen Y., ,” A Model For The Growth Of Bamboo And Skeletal Nanotubes:Catalytic Capillarity”, Journal Of Crystal Growth, 240:164-169(2002.
14. 14. German R.M.,, Sintering Theory And Practıce , Joyn Wiley & Sons. Inc., USA (1996).
15. 15. Chen Y., Gerald F., J Williams J.S., And Bulcock, S., , “Synthesis Of Boron Nitride Nanotubes At Low Temperatures Using Reactive Ball Milling”, Chemical Physics Letters, 299: 260-264 (1999).
16. 16. Louchev O.A., Lauda T., Sato Y., Kenda H.,”Diffusion-Controlled Kinetics Of Carbon Nanotube Forest Growth By Chemical Vapour Deposition”,Journal of Chem.Phy.,118: 7622- 7633 (2003)