Abstract
Surface morphologies of titanium implants has crucial importance for long-term stability which following their placement. Different techniques of surface modifications were adopted to increase bone–implant interface. Today there is a great needing to develop new surface modification methods when the industrial competitive conditions. Laser surface structuring is a unique, promising, clean, non-contact and environment-friendly method. At the present study, pure titanium implant surfaces were modified at micro-scale with using a fiber laser which working on Q-switched mode and their characterizations were conducted
Keywords
References
- [1] Qui-hong L., Jun Z., “High Power Fiber Lasers”, Front. Phys. China, Cilt:2, No:4; s:410-423, Higher Education Press and Springer-Verlag, 2007.
- [2] Paschotta R., “Fiber Lasers, Encyclopedia of Laser Physics and Technology”, http://www.rpphotonics.com/fiber_lasers.html.
- [3] Paschotta R., “High Power Fiber Lasers and Amplifiers, Encyclopedia of Laser, Physics and Technology”, http://www.rpphotonics.com/high_power_fiber_lasers_and_amplifiers. html.
- [4] Çelen S., “Lazer Yüzey Yapılandırılması ile Oluşturulan Đmplant Yüzeylerinin Mekanik Morfolojik Karekteristikleri”, Doktora Tezi, Ege Üniversitesi Fen Bilimleri Enstitüsü, 2011.
- [5] Özden H., Investigating Fiber Lasers for Shipbuilding and Marine Construction-Laser-Welding In Shipbuilding And Marine Structures, Welding Journal, 865, s:26-29, 2007.
- [6] Sutter D.H., Steinmeyer G., Gallmann L., Matuschek N.,Morier-Genoud F., Keller U., Scheuer V., Angelow G., Tschudi T. Semiconductor saturable-absorber mirrorassisted Kerr-lens mode-locked Ti:sapphire laser producing pulses in the two-cycle regime, Opt Lett., 24, s:631–633, 1999.
- [7] Fermann M.E., Galvanauskas A., Sucha G., Ultrafast LasersTechnology and Applications, Marcel Dekker Inc., 2003.
- [8] Uemura S, Torizuka K. Generation of 12-fs pulses from a diode-pumped Kerr-lens mode-locked Cr:LiSAF laser, Opt. Lett., 24, s:780–782, 1999.
- [9] Paschotta R., Aus der Au J., Keller U. Thermal effects inhigh power endpumped lasers with elliptical mode geometry. J Selected Topics Quantum Electron , 6, s:636–642, 2000.
- [10] Paschotta R., Aus der Au .J, Spuhler G.J., MorierGenoud F., Hovel R., Moser M., Erhard S., Karszewski M., Giesen A., Keller U. Diode-pumped passively modelocked lasers with high average power, Appl Phys B, 70, s25–31, 2000.
- [11] Gaggl A., Schultes G., Müller W. D. and Karcher H., “Scanning Electron Microscopical Analysis of LaserTreated Titanium Implant Surfaces-a Comparative Study”, Biomaterials, 21, s:1067-1073, 2000.
- [12] Karacs A., Fancsaly., Divinyi T., Peto G. and Kovach G., Morphological And Animal Study of Titanium Dental Implant Surface Induced by Blasting and High Intensity Pulsed Nd-glass Laser, Material Science and Engineering C, 23:431-435, 2003.
- [13] Peto G., Karacs A., Pastzi Z., Guczi L., Divinji T. and Joob A., “Surface Treatment of Screw Shaped Titanium Dental Implants by High Intensity Laser Pulses”, Applied Surface Science, 186, s:7-13, 2002.
- [14] Çelen S., Özden H., Efeoğlu C. ve Çelen K.S., “Micromorphological Characterisation of Laser Modified Titanium Dental Implant Surface”, Proceedings of the Fifth International WLT-Conference on Lasers in Manufacturing, (Ed. Ostendorf A., Graf T., Petring D., Otto A.), AT-Fachverlag GmbH, Stuttgart, s:459-464, 2009
İTERBİYUM-KATKILI FİBER LAZERLE Q-ANAHTARLAMALI MODDA İMPLANT YÜZEYİ MİKRO-İMALATI VE KAREKTERİZASYONU
Abstract
Titanyum implantların yüzey morfolojileri implantın yerleştirilmesini takip eden dönemde uzun-ömürlü stabilite açısından büyük öneme sahiptir. Titanyum dental implantların yüzey morfolojilerini modifiye etmek, kemik-implant temasındaki etkin yüzey alanını arttırmak için farklı yüzey işlemleri kullanılmaktadır. Endüstriyel açıdan rekabetçi koşulların her geçen gün önemini arttırdığı ve üretim zamanlarında bir saniyenin bile çok önemli olduğu günümüzde yeni üretim teknolojilerine ihtiyaç her zamankinden çok daha fazladır. Lazer yüzey yapılandırma yöntemi biyomedikal endüstrisinde malzemelerin yüzey özelliklerini modifiye etmek için eşsiz, gelecek vadeden, kontaminasyonsuz, temassız ve çevre dostu bir yüzey işlem tekniğidir. Bu çalışmada, Q-anahtarlamalı modda çalıştırılan iterbiyum-katkılı bir fiber lazerle saf titanyum implant yüzeylerinin yapılandırılması mikro boyutta gerçekleştirilmiş ve bu imal edilen yeni yüzeylerin karekterizasyonu yapılmıştır.
Keywords
References
- [1] Qui-hong L., Jun Z., “High Power Fiber Lasers”, Front. Phys. China, Cilt:2, No:4; s:410-423, Higher Education Press and Springer-Verlag, 2007.
- [2] Paschotta R., “Fiber Lasers, Encyclopedia of Laser Physics and Technology”, http://www.rpphotonics.com/fiber_lasers.html.
- [3] Paschotta R., “High Power Fiber Lasers and Amplifiers, Encyclopedia of Laser, Physics and Technology”, http://www.rpphotonics.com/high_power_fiber_lasers_and_amplifiers. html.
- [4] Çelen S., “Lazer Yüzey Yapılandırılması ile Oluşturulan Đmplant Yüzeylerinin Mekanik Morfolojik Karekteristikleri”, Doktora Tezi, Ege Üniversitesi Fen Bilimleri Enstitüsü, 2011.
- [5] Özden H., Investigating Fiber Lasers for Shipbuilding and Marine Construction-Laser-Welding In Shipbuilding And Marine Structures, Welding Journal, 865, s:26-29, 2007.
- [6] Sutter D.H., Steinmeyer G., Gallmann L., Matuschek N.,Morier-Genoud F., Keller U., Scheuer V., Angelow G., Tschudi T. Semiconductor saturable-absorber mirrorassisted Kerr-lens mode-locked Ti:sapphire laser producing pulses in the two-cycle regime, Opt Lett., 24, s:631–633, 1999.
- [7] Fermann M.E., Galvanauskas A., Sucha G., Ultrafast LasersTechnology and Applications, Marcel Dekker Inc., 2003.
- [8] Uemura S, Torizuka K. Generation of 12-fs pulses from a diode-pumped Kerr-lens mode-locked Cr:LiSAF laser, Opt. Lett., 24, s:780–782, 1999.
- [9] Paschotta R., Aus der Au J., Keller U. Thermal effects inhigh power endpumped lasers with elliptical mode geometry. J Selected Topics Quantum Electron , 6, s:636–642, 2000.
- [10] Paschotta R., Aus der Au .J, Spuhler G.J., MorierGenoud F., Hovel R., Moser M., Erhard S., Karszewski M., Giesen A., Keller U. Diode-pumped passively modelocked lasers with high average power, Appl Phys B, 70, s25–31, 2000.
- [11] Gaggl A., Schultes G., Müller W. D. and Karcher H., “Scanning Electron Microscopical Analysis of LaserTreated Titanium Implant Surfaces-a Comparative Study”, Biomaterials, 21, s:1067-1073, 2000.
- [12] Karacs A., Fancsaly., Divinyi T., Peto G. and Kovach G., Morphological And Animal Study of Titanium Dental Implant Surface Induced by Blasting and High Intensity Pulsed Nd-glass Laser, Material Science and Engineering C, 23:431-435, 2003.
- [13] Peto G., Karacs A., Pastzi Z., Guczi L., Divinji T. and Joob A., “Surface Treatment of Screw Shaped Titanium Dental Implants by High Intensity Laser Pulses”, Applied Surface Science, 186, s:7-13, 2002.
- [14] Çelen S., Özden H., Efeoğlu C. ve Çelen K.S., “Micromorphological Characterisation of Laser Modified Titanium Dental Implant Surface”, Proceedings of the Fifth International WLT-Conference on Lasers in Manufacturing, (Ed. Ostendorf A., Graf T., Petring D., Otto A.), AT-Fachverlag GmbH, Stuttgart, s:459-464, 2009
Details
| Primary Language | Turkish |
|---|---|
| Journal Section | Tasarım ve Teknoloji |
| Authors | |
| Publication Date | July 2, 2014 |
| Submission Date | March 25, 2013 |
| Published in Issue | Year 2014 Volume: 2 Issue: 2 |
