Research Article
BibTex RIS Cite

Hidrodinamik radyal kaymalı yataklarda yüzey pürüzlülüğünün sürtünme davranışları üzerindeki etkilerinin incelenmesi

Year 2022, Volume: 12 Issue: 3, 877 - 887, 15.07.2022
https://doi.org/10.17714/gumusfenbil.1006203

Abstract

Hidrodinamik kaymalı yataklarda, sürtünme katsayısı, yağ film kalınlığı, basınç dağılımı, yağ debisi, vb gibi parametreler yatak tasarımı ve optimum enerji verimliliği açısından oldukça önemli tasarım kriterleridir. Bu çalışmada, hidrodinamik kaymalı yataklarda yüzey pürüzlülüğünün yatak performansı üzerindeki etkilerini incelemek amacıyla, yatak malzemesi aynı olan üç farklı yüzey pürüzlülüğüne sahip yatak zarfı kullanılarak farklı yüklerde ve sıcaklıklarda deneyler yapılmıştır. Deneylerin sonucunda, yüzey pürüzlülüğünün, özellikle sınır ve karışık sürtünme bölgesinde sıvı sürtünme bölgesinden daha fazla etkin olduğu belirlenmiştir. Artan yüzey pürüzlülüğü ile birlikte yağ filmi oluşum kabiliyeti azalırken, aşınma ve yataktaki güç kaybının arttığı tespit edilmiştir.

References

  • Referans1. Cuvalci, H., and Baş, H., (2004). Investigation of the tribological properties of silicon containing zinc- aluminum based journal bearings. Tribology International, vol.37, no.6, 433-440.
  • Referans2. Delprete C and Razavykia A., (2018). Piston dynamics, lubrication and tribological performance evaluation: A review: P I Mech Eng International J. of Research 1-17.
  • Referans3. Chong W. W. F., De la Cruz, M. (2014). Elastoplastic contact of rough surfaces: a line contact model for boundary regime of lubrication. Meccanica, 49:1177–1191
  • Referans4. Mang, T. (2014). Encyclopedia of Lubricants and Lubrication. Springer. pp, 66.
  • Referans5. Mathias Woydt Rolf Wäsche, (2010). The history of the Stribeck curve and ball bearing steels: The role of Adolf Martens, Wear, 268,11-12, pp. 1542-1546.
  • Referans6. Chong, W. F., Hamdan S.H., (2019). Modelling Transitions in Regimes of Lubrication for Rough Surface Contact. Tribology of Powertrain Systems, 7(9), 77.
  • Referans7. Lu, X. (2006). Tribological Aspects of Journal Bearings Focusing on the Stribeck Curve. Materials Science, Corpus ID: 139899182. Referans8. Lu, X. Khonsary, M.M., Gelinck, E.R.M., (2006), The Stribeck Curve: Experimental Results and Theoretical Prediction Journal of Tribology, 128(4): 789-794
  • Referans9. Westerfield, Zachary, et al. (2016), A Study of the Friction of Oil Control Rings Using the Floating Liner Engine." SAE International Journal of Engines, vol. 9, no. 3, 2016, p. 1807
  • Referans10. Alford, L. P. McGraw Hill, (1911), Bearings and Their Lubrication. The American Machinist, Referans11. Sanchez, C., J., (2011). Tribological Characterization of Carbon Based Solid Lubricants. Texas A&M University, M.Sc Thesis, 74p, Texas.
  • Referans12. http://www.turekim.com/shell5.html shell tellus c 10
  • Referans13. Baş, H. (2021). Investigation of effects of Surface Roughness on Performance of Cam Mechanisms. IJAET, 10, 1, pp 67-73.

Investigation of the effects of surface roughness on friction behavior in hydrodynamic radial plain bearings

Year 2022, Volume: 12 Issue: 3, 877 - 887, 15.07.2022
https://doi.org/10.17714/gumusfenbil.1006203

Abstract

In hydrodynamic plain bearings, parameters such as friction coefficient, oil film thickness, pressure distribution, oil flow, etc. are very important design criteria in terms of bearing design and optimum energy efficiency. In this study, in order to investigate the effects of surface roughness on bearing performance in hydrodynamic plain bearings, experiments were carried out at different loads and temperatures using two bearing envelopes with the same bearing material and with different surface roughness. As a result of the experiments, it was determined that the surface roughness was more effective especially in the boundary and mixed friction region than in the fluid friction region. It was determined that while the oil film formation ability decreased with increasing surface roughness, wear and power loss in the bearing increased.

References

  • Referans1. Cuvalci, H., and Baş, H., (2004). Investigation of the tribological properties of silicon containing zinc- aluminum based journal bearings. Tribology International, vol.37, no.6, 433-440.
  • Referans2. Delprete C and Razavykia A., (2018). Piston dynamics, lubrication and tribological performance evaluation: A review: P I Mech Eng International J. of Research 1-17.
  • Referans3. Chong W. W. F., De la Cruz, M. (2014). Elastoplastic contact of rough surfaces: a line contact model for boundary regime of lubrication. Meccanica, 49:1177–1191
  • Referans4. Mang, T. (2014). Encyclopedia of Lubricants and Lubrication. Springer. pp, 66.
  • Referans5. Mathias Woydt Rolf Wäsche, (2010). The history of the Stribeck curve and ball bearing steels: The role of Adolf Martens, Wear, 268,11-12, pp. 1542-1546.
  • Referans6. Chong, W. F., Hamdan S.H., (2019). Modelling Transitions in Regimes of Lubrication for Rough Surface Contact. Tribology of Powertrain Systems, 7(9), 77.
  • Referans7. Lu, X. (2006). Tribological Aspects of Journal Bearings Focusing on the Stribeck Curve. Materials Science, Corpus ID: 139899182. Referans8. Lu, X. Khonsary, M.M., Gelinck, E.R.M., (2006), The Stribeck Curve: Experimental Results and Theoretical Prediction Journal of Tribology, 128(4): 789-794
  • Referans9. Westerfield, Zachary, et al. (2016), A Study of the Friction of Oil Control Rings Using the Floating Liner Engine." SAE International Journal of Engines, vol. 9, no. 3, 2016, p. 1807
  • Referans10. Alford, L. P. McGraw Hill, (1911), Bearings and Their Lubrication. The American Machinist, Referans11. Sanchez, C., J., (2011). Tribological Characterization of Carbon Based Solid Lubricants. Texas A&M University, M.Sc Thesis, 74p, Texas.
  • Referans12. http://www.turekim.com/shell5.html shell tellus c 10
  • Referans13. Baş, H. (2021). Investigation of effects of Surface Roughness on Performance of Cam Mechanisms. IJAET, 10, 1, pp 67-73.
There are 11 citations in total.

Details

Primary Language Turkish
Subjects Engineering
Journal Section Articles
Authors

Hasan Baş 0000-0002-5653-3813

Publication Date July 15, 2022
Submission Date October 21, 2021
Acceptance Date June 25, 2022
Published in Issue Year 2022 Volume: 12 Issue: 3

Cite

APA Baş, H. (2022). Hidrodinamik radyal kaymalı yataklarda yüzey pürüzlülüğünün sürtünme davranışları üzerindeki etkilerinin incelenmesi. Gümüşhane Üniversitesi Fen Bilimleri Dergisi, 12(3), 877-887. https://doi.org/10.17714/gumusfenbil.1006203