Bu araştırma; Kangal köpeklerinde ilk kez bilgisayarlı tomografik
görüntüler kullanılarak trachea’nın ayrıntılı anatomisini elde etmek amacıyla
gerçekleştirilmiştir. Çalışmada 5 erkek ve 5 dişi olmak üzere toplam 10 erişkin
Kangal köpeği kullanılmıştır. Multidedektör bilgisayarlı tomografi (MDBT) cihazından
elde edilen görüntüler, üç boyutlu (3D) modelleme yazılımı (VITAL, Vitrea 2,HP
XW 6400) ile trachea’nın üç boyutlu yeniden yapılandırılmasında kullanılmıştır.
Trachea’nın ölçümleri; hem pars cervicalis hem de pars thoracalis bölgelerinde;
cranial ve caudal noktalar belirlenerek yapılmıştır. Trachea’nın 4 noktasından
alınan transversal ve vertical çap ölçümleri, bu çapların birbirlerine oranı
(T/V) ile kesitsel lümen alanları (crosssectional area CSA), BT (Bilgisayarlı
tomografi) tarayıcı yazılımı ile ölçülmüştür. Erkekler ve dişiler arasında
önemli bir istatistiksel fark bulunmamıştır. Trachea’nın başlangıç ve bitiş
kısımlarında çapların arttığı gözlenmiştir. Transversal çapların bütün ölçüm
noktalarında vertical çaplardan daha yüksek değerlerde olduğu tespit
edilmiştir. Üç boyutlu modelleme ile trachea’nın dorsoventral basık ve tam
olmayan elipsoid şeklinde olduğu ortaya konmuştur. Araştırmanın ilk kez
yapılmış olması sebebiyle, anatomi alanındaki benzer çalışmalara kaynak teşkil
edebileceği düşünülmektedir.
This study was conducted to obtain a detailed anatomy of the trachea in Kangal dogs, for the first time using computerized tomographic images. In this study, 5 male and 5 female total 10 adult Kangal dogs were used. The images obtained from a multidetector computerized tomography device (MDBT) were used for 3D reconstruction of the trachea with the 3D modelling software (VITAL, Vitrea 2, HPXW 6400). The measurements of the trachea were made from the cranial and caudal points determined at the cervical and thoracal regions. Transversal and vertical diameters of the trachea taken from 4 different points , the ratio of these diameters (T/V) and cross sectional areas (CSA) , were measured by CT (computer tomography) scanner software. A significant statistical difference was not found between males and females. An increase in the diameter of the trachea at the beginning and terminal parts was observed. It was found that the transversal diameters were greater than the vertical diameters at all measuring points. In the 3D modelling, trachea has been found to be dorsoventrally flat with an incomplete elipsoid form. It is thought that this work, which was first made in Kangal dogs, may be a source for similar work in the anatomy.
This study was conducted to obtain a detailed anatomy of the trachea
in Kangal dogs, for the first time using computerized tomographic images. In
this study, 5 male and 5 female total 10 adult Kangal dogs were used. The
images obtained from a multidetector computerized tomography device (MDBT) were
used for 3D reconstruction of the trachea with the 3D modelling software
(VITAL, Vitrea 2, HPXW 6400). The
measurements of the trachea were made from the cranial and caudal points
determined at the cervical and thoracal regions. Transversal and vertical diameters of the trachea taken from 4 different
points , the ratio of these diameters (T/V) and cross sectional areas (CSA) ,
were measured by CT (computer tomography) scanner software. A significant
statistical difference was not found between males and females. An increase in
the diameter of the trachea at the beginning and terminal parts was observed.
It was found that the transversal diameters were greater than the vertical
diameters at all measuring points. In the 3D modelling, trachea has been found
to be dorsoventrally flat with an incomplete elipsoid form. It is thought that
this work, which was first made in Kangal dogs, may be a source for similar
work in the anatomy.
Primary Language | Turkish |
---|---|
Journal Section | Research |
Authors | |
Publication Date | December 27, 2018 |
Submission Date | April 16, 2018 |
Acceptance Date | November 25, 2018 |
Published in Issue | Year 2018 Volume: 7 Issue: 2 |