Review
BibTex RIS Cite

Year 2024, Volume: 8 Issue: 1, 65 - 77, 31.03.2024

Erhan Cetin , Sertac Samed Seyitoglu

https://doi.org/10.30939/ijastech..1374313
Cited By: 3

Abstract

References

  • [1] Evans, KE. Auxetic polymers: a new range of materials. En-deavour. 1991;15:170–174. https://doi.org/10.1016/0160-9327(91)90123-S
  • [2] Brighenti R. Smart behaviour of layered plates through the use of auxetic materials. Thin-Walled Structures. 2014;84: 432–442. https://doi.org/10.1016/j.tws.2014.07.017
  • [3] Guo MF, Yang H, Ma L. Design and analysis of 2D double-U auxetic honeycombs. Thin-Walled Structures. 2020;155: 106915. https://doi.org/10.1016/j.tws.2020.106915
  • [4] Simpson J, Kazancı Z. Crushing investigation of crash boxes filled with honeycomb and re-entrant (auxetic) lattices. Thin-Walled Structures. 2020;150:106676. https://doi.org/10.1016/j.tws.2020.106676
  • [5] Wei L, Zhao X, Yu Q, Zhu G. A novel star auxetic honeycomb with enhanced in-plane crushing strength. Thin-Walled Struc-tures.2020;149:106623. https://doi.org/10.1016/j.tws.2020.106623
  • [6] Mohsenizadeh S, Alipour R, Shokri Rad M, Farokhi Nejad A, Ahmad Z. Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading. Materials & Design. 2015;88:258–268. https://doi.org/10.1016/j.matdes.2015.08.152
  • [7] Tunay M, Cetin E. Energy absorption of 2D auxetic structures fabricated by fused deposition modeling. Journal of the Brazili-an Society of Mechanical Sciences and Engineering. 2023;45:500. https://doi.org/10.1007/s40430-023-04423-3
  • [8] Mazhnik E, Oganov AR. A model of hardness and fracture toughness of solids. Journal of Applied Physics. 2019;126:125109. https://doi.org/10.1063/1.5113622
  • [9] Donoghue JP, Alderson KL, Evans KE. The fracture toughness of composite laminates with a negative Poisson’s ratio. Physica Status Solidi (b). 2009;246:2011–2017. https://doi.org/10.1002/pssb.200982031
  • [10] Morin‐Martinez AA, Arcudia J, Zarate X, Cifuentes‐Quintal ME, Merino G. The quest for a bidirectional auxetic, elastic, and enhanced fracture toughness material: Revisiting the me-chanical properties of the the BeH2 monolayers. Journal of Computational Chemistry. 2022;44(3):248-255. https://doi.org/10.1002/jcc.26875
  • [11] Novak N, Krstulović-Opara L, Z. Ren Z, Vesenjak M. Com-pression and shear behaviour of graded chiral auxetic structures. Mechanics of Materials. 2020;148:103524. https://doi.org/10.1016/j.mechmat.2020.103524
  • [12] Choi JB, Lakes RS. Non-linear properties of polymer cellular materials with a negative Poisson’s ratio. Journal of Materials Science. 1992;27:4678–4684. https://doi.org/10.1007/BF01166005
  • [13] Henyš, P, Vomáčko V, Ackermann M, Sobotka J, Solfronk P, Šafka J, Čapek L. Normal and shear behaviours of the auxetic metamaterials: homogenisation and experimental approaches. Meccanica. 2019;54:831–839. https://doi.org/10.1007/s11012-019-01000-8
  • [14] Coenen VL, Alderson KL. Mechanisms of failure in the static indentation resistance of auxetic carbon fibre laminates. Physi-ca Status Solidi (b). 2011;248:66–72. https://doi.org/10.1002/pssb.201083977
  • [15] Argatov II, Guinovart-Díaz R, Sabina FJ. On local indentation and impact compliance of isotropic auxetic materials from the continuum mechanics viewpoint. International Journal of Engi-neering Science. 2012;54:42–57. https://doi.org/10.1016/j.ijengsci.2012.01.010
  • [16] Lakes RS, Elms K. Indentability of Conventional and Nega-tive Poisson’s Ratio Foams. Journal of Composite Materials. 1993;27:1193–1202. https://doi.org/10.1177/002199839302701203
  • [17] Chekkal I, Bianchi M, Remillat C, Bécot F-X, Jaouen L, Scar-pa F. Vibro-Acoustic Properties of Auxetic Open Cell Foam: Model and Experimental Results. Acta Acustica united with Acustica. 2010;96:266–274. https://doi.org/10.3813/AAA.918276
  • [18] Eghbali P, Younesian D, Farhangdoust S. Enhancement of the low-frequency acoustic energy harvesting with auxetic resona-tors. Applied Energy. 2020;270:115217. https://doi.org/10.1016/j.apenergy.2020.115217
  • [19] Ye HF, Tao M, Zhang WZ. Modeling and Sound Insulation Performance Analysis of Two Honeycomb-hole Coatings. Journal of Physics: Conference Series. 2018;1016:012001. https://doi.org/10.1088/1742-6596/1016/1/012001
  • [20] Xie YM, Yang X, Shen J, Yan X, Ghaedizadeh A, Rong J, Huang X, Zhou S. Designing orthotropic materials for negative or zero compressibility. International Journal of Solids and Structures. 2014;51:4038–4051. https://doi.org/10.1016/j.ijsolstr.2014.07.024
  • [21] Grima JN, Caruana-Gauci R, Wojciechowski KW, Evans KE. Smart hexagonal truss systems exhibiting negative compressibil-ity through constrained angle stretching. Smart Materials and Structures. 2013;22:084015. https://doi.org/10.1088/0964-1726/22/8/084015
  • [22] Maruszewski TS, Wojciechowski KW. Anomalous defor-mation of constrained auxetic square. Review Advanced Mate-rial Science. 2010;23:169–174.
  • [23] Amin F, Ali MN, Ansari U, Mir M, Minhas MA, Shahid W. Auxetic Coronary Stent Endoprosthesis: Fabrication and Struc-tural Analysis. Journal of Applied Biomaterials & Functional Materials. 2015;13:127–135. https://doi.org/10.5301/jabfm.50002
  • [24] Akgun M, Eren R, Suvari F, Yurdakul T. Investigation of the effect of pique weave on auxetic performance and related fab-ric properties. The Journal of The Textile Insti-tute.2021;113(11):2369-2380. https://doi.org/10.1080/00405000.2021.1983978
  • [25] Critchley R, Corni I, Wharton JAA, Walsh FCC, Wood RJK, Stokes KR. A review of the manufacture, mechanical properties and potential applications of auxetic foams. Physica Status Sol-idi (b). 2013;250:1963–1982. https://doi.org/10.1002/pssb.201248550
  • [26] Ren X, Shen J, Tran P, Ngo TD, Xie YM. Auxetic nail: Design and experimental study. Composite Structures. 2018;184:288–298. https://doi.org/10.1016/j.compstruct.2017.10.013
  • [27] Zhang XY, Wang XY, Ren X, Xie YM, Wu Y, Zhou YY, Wang SL, Han CZ. A novel type of tubular structure with auxe-ticity both in radial direction and wall thickness. Thin-Walled Structures. 2021;163:107758. https://doi.org/10.1016/j.tws.2021.107758
  • [28] Luo C, Han CZ, Zhang XY, Zhang XG, Ren X, Xie YM. De-sign, manufacturing and applications of auxetic tubular struc-tures: A review. Thin-Walled Structures. 2021;163:107682. https://doi.org/10.1016/j.tws.2021.107682
  • [29] Luo C, Ren X, Han D, Zhang XG, Zhong R, Zhang XY, Xie YM. A novel concrete-filled auxetic tube composite structure: Design and compressive characteristic study. Engineering Struc-tures. 2022;268:114759. https://doi.org/10.1016/j.engstruct.2022.114759
  • [30] Askari M, Hutchins DA, Thomas PJ, Astolfi L, Watson RL, Abdi M, Ricci M, Laureti S, Nie L, Freear S., Wildman R, Tuck C, Clarke M, Woods E, Clare AT. Additive manufacturing of metamaterials: A review. Additive Manufacturing. 2020;36:101562. https://doi.org/10.1016/j.addma.2020.101562
  • [31] Saxena K.K., Das R., Calius E.P., Three Decades of Auxetics Research − Materials with Negative Poisson’s Ratio: A Review. Advanced Engineering Materials. 2016;18:1847–1870. https://doi.org/10.1002/adem.201600053
  • [32] Liu Y., Hu H., A review on auxetic structures and polymeric materials. Scientific Research and Essays. 2010;5:1052–1063.
  • [33] Jiang W, Ren X, Wang SL, Zhang XG, Zhang XY, Luo C, Xie YM, Scarpa F, Alderson A, Evans EE. Manufacturing, charac-teristics and applications of auxetic foams: A state-of-the-art review. Composites Part B: Engineering. 2022;235:109733. https://doi.org/10.1016/j.compositesb.2022.109733
  • [34] Carneiro VH, Meireles J, Puga H, Auxetic materials — A re-view. Materials Science-Poland. 2013;31:561–571. https://doi.org/10.2478/s13536-013-0140-6
  • [35] Love AEH, A treatise on the mathematical theory of elasticity, Dover Publications, New York, 1944.
  • [36] Lakes R. Foam Structures with a Negative Poisson’s Ratio. Science. 1987;235:1038–1040. https://doi.org/10.1126/science.235.4792.1038
  • [37] Chan N, Evans KE. Fabrication methods for auxetic foams. Journal of Materials Science. 1997;32:5945–5953. https://doi.org/10.1023/A:1018606926094
  • [38] Scarpa F, Yates JR, Ciffo LG, Patsias S. Dynamic crushing of auxetic open-cell polyurethane foam, Proceedings of the Insti-tution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science. 2002;216:1153–1156. https://doi.org/10.1243/09544060232102938
  • [39] Bezazi A. Scarpa F. Mechanical behaviour of conventional and negative Poisson’s ratio thermoplastic polyurethane foams under compressive cyclic loading. International Journal of Fa-tigue. 2007;29:922–930. https://doi.org/10.1016/j.ijfatigue.2006.07.015
  • [40] Bezazi A, Scarpa F. Tensile fatigue of conventional and nega-tive Poisson’s ratio open cell PU foams. International Journal of Fatigue. 2009;31:488–494. https://doi.org/10.1016/j.ijfatigue.2008.05.005
  • [41] Bianchi M, Scarpa FL, Smith CW. Stiffness and energy dissi-pation in polyurethane auxetic foams. Journal of Materials Sci-ence. 2008;43:5851–5860. https://doi.org/10.1007/s10853-008-2841-5
  • [42] Bianchi M, Scarpa F, Banse M, Smith CW. Novel generation of auxetic open cell foams for curved and arbitrary shapes. Ac-ta Materialia. 2011;59:686–691. https://doi.org/10.1016/j.actamat.2010.10.006
  • [43] Grima JN, Gatt R, Alderson A, Evans KE. On the potential of connected stars as auxetic systems. Molecular Simulation. 2005;31:925–935. https://doi.org/10.1080/08927020500401139
  • [44] Grima JN, Gatt R, Ellul B, Chetcuti E. Auxetic behaviour in non-crystalline materials having star or triangular shaped perfo-rations. Journal of Non-Crystalline Solids. 2010;356:1980–1987. https://doi.org/10.1016/j.jnoncrysol.2010.05.074
  • [45] Wang H, Lu Z, Yang Z, Li X. A novel re-entrant auxetic hon-eycomb with enhanced in-plane impact resistance. Composite Structures. 2019;208:758–770. https://doi.org/10.1016/j.compstruct.2018.10.024
  • [46] Guo M-F, Yang H, Ma L. 3D lightweight double arrow-head plate-lattice auxetic structures with enhanced stiffness and en-ergy absorption performance. Composite Structures. 2022;290:115484. https://doi.org/10.1016/j.compstruct.2022.115484
  • [47] Lan X, Meng L, Zhao J, Wang Z. Mechanical properties and damage characterizations of 3D double-arrowhead auxetic structure with high-relative-density realized via selective laser melting. European Journal of Mechanics-A/Solids. 2021;90:104386. https://doi.org/10.1016/j.euromechsol.2021.104386
  • [48] Chen Y-L, Wang X-T, Ma L. Damping mechanisms of CFRP three-dimensional double-arrow-head auxetic metamaterials. Polymer Testing. 2020;81:106189. https://doi.org/10.1016/j.polymertesting.2019.106189
  • [49] Wang X-T, Wang B, Wen Z-H, Ma L. Fabrication and me-chanical properties of CFRP composite three-dimensional dou-ble-arrow-head auxetic structures. Composites Science and Technology. 2018;164:92–102. https://doi.org/10.1016/j.compscitech.2018.05.014
  • [50] Qiao JX, Chen CQ. Impact resistance of uniform and func-tionally graded auxetic double arrowhead honeycombs. Interna-tional Journal of Impact Engineering. 2015;83:47–58. https://doi.org/10.1016/j.ijimpeng.2015.04.005
  • [51] Zhang Z, Wen Q, Li P, Hu H. Application of double arrow-head auxetic honeycomb structure in displacement measure-ment. Sensors and Actuators A: Physical. 2022;333:113218. https://doi.org/10.1016/j.sna.2021.113218
  • [52] Gibson, LJ, Ashby, MF, Schajer, GS, Robertson, CI. The me-chanics of two-dimensional cellular materials. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences. 1982;382:25–42. https://doi.org/10.1098/rspa.1982.0088
  • [53] Masters IG, Evans KE. Models for the elastic deformation of honeycombs. Composite Structures. 1996;35:403–422. https://doi.org/10.1016/S0263-8223(96)00054-2
  • [54] Hu LL, Zhou MZ, Deng H. Dynamic crushing response of auxetic honeycombs under large deformation: Theoretical anal-ysis and numerical simulation. Thin-Walled Structures. 2018;131:373–384. https://doi.org/10.1016/j.tws.2018.04.020
  • [55] Hu LL, Zhou MZ, Deng H. Dynamic indentation of auxetic and non-auxetic honeycombs under large deformation. Compo-site Structures. 2019;207:323–330. https://doi.org/10.1016/j.compstruct.2018.09.066
  • [56] Kolken HMA, Zadpoor AA, Auxetic mechanical metamateri-als. RSC Advances. 2017;7:5111–5129. https://doi.org/10.1039/C6RA27333E
  • [57] Gaspar N, Ren XJ, Smith CW, Grima JN, Evans KE. Novel honeycombs with auxetic behaviour. Acta Materialia. 2005;53:2439–2445. https://doi.org/10.1016/j.actamat.2005.02.006
  • [58] Smith CW, Grima J, Evans KE. A novel mechanism for gen-erating auxetic behaviour in reticulated foams: missing rib foam model. Acta Materialia. 2000;48:4349–4356. https://doi.org/10.1016/S1359-6454(00)00269-X
  • [59] Najafi M, Ahmadi H, Liaghat G. Experimental investigation on energy absorption of auxetic structures. Mater Today Pro-ceedings. 2021;34:350–355. https://doi.org/10.1016/j.matpr.2020.06.075
  • [60] Grima JN, Evans KE. Auxetic behavior from rotating triangles. Journal of Materials Science. 2006;41:3193–3196. https://doi.org/10.1007/s10853-006-6339-8
  • [61] Grima JN, Alderson A, Evans, KE. Negative poisson’s ratios from rotationg rectangles. Comput Methods Sci Technol. 2004;10:137–145. https://doi.org/10.12921/cmst.2004.10.02.137-145
  • [62] Grima JN, Evans KE. Auxetic behavior from rotating squares. Journal of Materials Science Letters. 2000;19:1563–1565.
  • [63] Grima JN, Farrugia P-S, Gatt R, Attard D. On the auxetic properties of rotating rhombi and parallelograms: A preliminary investigation. Phys Status Solidi(b). 2008;245:521–529. https://doi.org/10.1002/pssb.200777705
  • [64] Gatt R, Mizzi L, Azzopardi JI, Azzopardi KM, Attard D, Casha A, Briffa J, Grima JN. Hierarchical auxetic mechanical metamaterials. Scientific Reports. 2015;5:1–6. https://doi.org/10.1038/srep08395
  • [65] Kelvin WTB. The molecular tactics of a crystal, Clarendon Press; 1894.
  • [66] A. Alderson A, Alderson KL, Attard D, Evans KE, Grima JN, Gatt R, Miller W, Ravirala N, Smith CW, Zied K. Elastic con-stants of 3-, 4- and 6-connected chiral and anti-chiral honey-combs subject to uniaxial in-plane loading. Composites Science and Technology. 2010;70:1042–1048. https://doi.org/10.1016/j.compscitech.2009.07.009
  • [67] Hu LL, Luo ZR, Zhang ZY, Lian MK, Huang LS. Mechanical property of re-entrant anti-trichiral honeycombs under large de-formation. Composites Part B: Engineering. 2019;163:107–120. https://doi.org/10.1016/j.compositesb.2018.11.010
  • [68] Mousanezhad D, Haghpanah B, Ghosh R, Hamouda AM, Nayeb-Hashemi H, Vaziri A. Elastic properties of chiral, anti-chiral, and hierarchical honeycombs: A simple energy-based approach. Theoretical and Applied Mechanics Letters. 2016;6:81–96. https://doi.org/10.1016/j.taml.2016.02.004
  • [69] Ha CS, Plesha ME, Lakes RS. Chiral three-dimensional lattices with tunable Poisson’s ratio. Smart Materials and Structures. 2016;25:054005. https://doi.org/10.1088/0964-1726/25/5/054005
  • [70] Gatt R, Attard D, Farrugia P-S, Azzopardi KM, Mizzi L, Brin-cat J-P, Grima JN. A realistic generic model for anti-tetrachiral systems. Phys Status Solidi (b). 2013;250:2012–2019. https://doi.org/10.1002/pssb.201384246
  • [71] Grima JN, Gatt R, Farrugia P-S. On the properties of auxetic meta-tetrachiral structures. Phys Status Solidi(b). 2008;245:511–520. https://doi.org/10.1002/pssb.200777704
  • [72] Jiang Y, Li Y. 3D Printed Auxetic Mechanical Metamaterial with Chiral Cells and Re-entrant Cores. Scientific Reports. 2018;8:2397. https://doi.org/10.1038/s41598-018-20795-2
  • [73] Wu W, Qi D, Liao H, Qian G, Geng L, Niu Y, Liang J. De-formation mechanism of innovative 3D chiral metamaterials. Scientific Reports. 2018;8:12575. https://doi.org/10.1038/s41598-018-30737-7
  • [74] Ebrahimi H, Mousanezhad D, Nayeb-Hashemi H, Norato J, Vaziri A. 3D cellular metamaterials with planar anti-chiral to-pology. Materials & Design. 2018;145:226–231. https://doi.org/10.1016/j.matdes.2018.02.052
  • [75] Liu S, Lu G, Chen Y, Leong YW. Deformation of the Miura-ori patterned sheet. International Journal of Mechanical Scienc-es. 2015;99:130–142. https://doi.org/10.1016/j.ijmecsci.2015.05.009
  • [76] Lv C, Krishnaraju D, Konjevod G, Yu H, Jiang H. Origami based Mechanical Metamaterials. Scientific Reports. 2015,4: 5979. https://doi.org/10.1038/srep05979
  • [77] Bertoldi K, Vitelli V, Christensen J, Van Hecke M. Flexible mechanical metamaterials. Nature Reviews Materials. 2017;2:17066. https://doi.org/10.1038/natrevmats.2017.66
  • [78] Eidini M. Zigzag-base folded sheet cellular mechanical met-amaterials. Extreme Mechanics Letters. 2016;6:96–102. https://doi.org/10.1016/j.eml.2015.12.006
  • [79] De Bellis N. Bibliometrics and citation analysis: from the sci-ence citation index to cybermetrics. Scarecrow press; 2009.
  • [80] Yaoyang X, Boeing WJ. Mapping biofuel field: A bibliometric evaluation of research output. Renewable and Sustainable En-ergy Reviews. 2013;28:82–91. https://doi.org/10.1016/j.rser.2013.07.027
  • [81] Du H, Li N, Brown MA, Peng Y, Shuai Y. A bibliographic analysis of recent solar energy literatures: The expansion and evolution of a research field. Renewable Energy. 2014;66:696–706. https://doi.org/10.1016/j.renene.2014.01.018
  • [82] van Eck NJ, Waltman L. Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics. 2010;84:523–538. https://doi.org/10.1007/s11192-009-0146-3
  • [83] Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, Bernard A, Schulz J, Graf P, Ahuja B, Martina F. De-sign for Additive Manufacturing: Trends, opportunities, consid-erations, and constraints. CIRP Annals. 2016;65:737–760. https://doi.org/10.1016/j.cirp.2016.05.004
  • [84] Chen Z, Li Z, Li J, Liu C, Lao C, Fu Y, Liu C, Li Y, Wang P, He Y, 3D printing of ceramics: A review. Journal of the Euro-pean Ceramic Society. 2019;39:661–687. https://doi.org/10.1016/j.jeurceramsoc.2018.11.013
  • [85] Zhang Y, Wang S, Ji G, A Comprehensive Survey on Particle Swarm Optimization Algorithm and Its Applications. Mathemat-ical Problems in Engineering. 2015;2015:931256. https://doi.org/10.1155/2015/931256
  • [86] Ren X, Das R, Tran P, Ngo TD, Xie YM, Auxetic metamateri-als and structures: a review. Smart Materials and Structures. 2018;27:023001. https://doi.org/10.1088/1361-665X/aaa61c
  • [87] Körner C. Additive manufacturing of metallic components by selective electron beam melting - a review. International Materi-als Reviews. 2016;61:361–377. https://doi.org/10.1080/09506608.2016.1176289
  • [88] Gong H, Rafi K, Gu H, Janaki Ram GD, Starr T, Stucker B. Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting. Materials & Design. 2015;86:545–554. https://doi.org/10.1016/j.matdes.2015.07.147
  • [89] Babaee S, Shim J, Weaver JC, Chen ER, Patel N, Bertoldi K. 3D Soft Metamaterials with Negative Poisson’s Ratio. Ad-vanced Materials. 2013;25:5044–5049. https://doi.org/10.1002/adma.201301986
  • [90] Jiang J.W, Park HS. Negative poisson’s ratio in single-layer black phosphorus. Nature Communications. 2014;5:4727. https://doi.org/10.1038/ncomms5727
  • [91] Bückmann T, Stenger N, Kadic M, J. Kaschke J, Frölich A, Kennerknecht T., Eberl C., Thiel M., Wegener M., Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography. Advanced Materials. 2012;24:2710–2714. https://doi.org/10.1002/adma.201200584
  • [92] Yu X, Zhou J, Liang H, Jiang Z, Wu L, Mechanical metamate-rials associated with stiffness, rigidity and compressibility: A brief review. Progress in Materials Science. 2018;94:114–173. https://doi.org/10.1016/j.pmatsci.2017.12.003

A bibliometric overview of research on auxetic structures: Trends and patterns

Year 2024, Volume: 8 Issue: 1, 65 - 77, 31.03.2024

Erhan Cetin , Sertac Samed Seyitoglu

https://doi.org/10.30939/ijastech..1374313
Cited By: 3

Abstract

Auxetic structures have very interesting features compared to traditional structures and can also be used in the automotive industry thanks to their lightness and strength have attracted the attention of researchers in recent decades. The current study summarizes the contributions made by researchers from all over the world between 2002 and 2022 in the field of auxetic structures. Using the Scopus database, a bibliometric analysis was used to examine the scientific studies in the area. The analysis covered different characteristics of publications, including publication type, main study fields, journals, citations, authorship patterns, affiliations, and keywords. The bibliometric indicators showed that there were 2599 publications published by 5161 authors in 85 countries from 2002 to 2022. The results also showed that the publications produced came primarily from China, the United States, and the United Kingdom, and the publications produced from these countries accounted for 42.99% of all publications. In particular, the most productive author, country, institution, and journal are Grima JN, China, Ministry of Education China, and Composite Structures, respectively. This study has great value since it demonstrates how to research topics change from year to year and can predict future development trends.

Keywords

Auxetic structures Bibexcel Bibliometric analysis Scopus VOSviewer

References

  • [1] Evans, KE. Auxetic polymers: a new range of materials. En-deavour. 1991;15:170–174. https://doi.org/10.1016/0160-9327(91)90123-S
  • [2] Brighenti R. Smart behaviour of layered plates through the use of auxetic materials. Thin-Walled Structures. 2014;84: 432–442. https://doi.org/10.1016/j.tws.2014.07.017
  • [3] Guo MF, Yang H, Ma L. Design and analysis of 2D double-U auxetic honeycombs. Thin-Walled Structures. 2020;155: 106915. https://doi.org/10.1016/j.tws.2020.106915
  • [4] Simpson J, Kazancı Z. Crushing investigation of crash boxes filled with honeycomb and re-entrant (auxetic) lattices. Thin-Walled Structures. 2020;150:106676. https://doi.org/10.1016/j.tws.2020.106676
  • [5] Wei L, Zhao X, Yu Q, Zhu G. A novel star auxetic honeycomb with enhanced in-plane crushing strength. Thin-Walled Struc-tures.2020;149:106623. https://doi.org/10.1016/j.tws.2020.106623
  • [6] Mohsenizadeh S, Alipour R, Shokri Rad M, Farokhi Nejad A, Ahmad Z. Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading. Materials & Design. 2015;88:258–268. https://doi.org/10.1016/j.matdes.2015.08.152
  • [7] Tunay M, Cetin E. Energy absorption of 2D auxetic structures fabricated by fused deposition modeling. Journal of the Brazili-an Society of Mechanical Sciences and Engineering. 2023;45:500. https://doi.org/10.1007/s40430-023-04423-3
  • [8] Mazhnik E, Oganov AR. A model of hardness and fracture toughness of solids. Journal of Applied Physics. 2019;126:125109. https://doi.org/10.1063/1.5113622
  • [9] Donoghue JP, Alderson KL, Evans KE. The fracture toughness of composite laminates with a negative Poisson’s ratio. Physica Status Solidi (b). 2009;246:2011–2017. https://doi.org/10.1002/pssb.200982031
  • [10] Morin‐Martinez AA, Arcudia J, Zarate X, Cifuentes‐Quintal ME, Merino G. The quest for a bidirectional auxetic, elastic, and enhanced fracture toughness material: Revisiting the me-chanical properties of the the BeH2 monolayers. Journal of Computational Chemistry. 2022;44(3):248-255. https://doi.org/10.1002/jcc.26875
  • [11] Novak N, Krstulović-Opara L, Z. Ren Z, Vesenjak M. Com-pression and shear behaviour of graded chiral auxetic structures. Mechanics of Materials. 2020;148:103524. https://doi.org/10.1016/j.mechmat.2020.103524
  • [12] Choi JB, Lakes RS. Non-linear properties of polymer cellular materials with a negative Poisson’s ratio. Journal of Materials Science. 1992;27:4678–4684. https://doi.org/10.1007/BF01166005
  • [13] Henyš, P, Vomáčko V, Ackermann M, Sobotka J, Solfronk P, Šafka J, Čapek L. Normal and shear behaviours of the auxetic metamaterials: homogenisation and experimental approaches. Meccanica. 2019;54:831–839. https://doi.org/10.1007/s11012-019-01000-8
  • [14] Coenen VL, Alderson KL. Mechanisms of failure in the static indentation resistance of auxetic carbon fibre laminates. Physi-ca Status Solidi (b). 2011;248:66–72. https://doi.org/10.1002/pssb.201083977
  • [15] Argatov II, Guinovart-Díaz R, Sabina FJ. On local indentation and impact compliance of isotropic auxetic materials from the continuum mechanics viewpoint. International Journal of Engi-neering Science. 2012;54:42–57. https://doi.org/10.1016/j.ijengsci.2012.01.010
  • [16] Lakes RS, Elms K. Indentability of Conventional and Nega-tive Poisson’s Ratio Foams. Journal of Composite Materials. 1993;27:1193–1202. https://doi.org/10.1177/002199839302701203
  • [17] Chekkal I, Bianchi M, Remillat C, Bécot F-X, Jaouen L, Scar-pa F. Vibro-Acoustic Properties of Auxetic Open Cell Foam: Model and Experimental Results. Acta Acustica united with Acustica. 2010;96:266–274. https://doi.org/10.3813/AAA.918276
  • [18] Eghbali P, Younesian D, Farhangdoust S. Enhancement of the low-frequency acoustic energy harvesting with auxetic resona-tors. Applied Energy. 2020;270:115217. https://doi.org/10.1016/j.apenergy.2020.115217
  • [19] Ye HF, Tao M, Zhang WZ. Modeling and Sound Insulation Performance Analysis of Two Honeycomb-hole Coatings. Journal of Physics: Conference Series. 2018;1016:012001. https://doi.org/10.1088/1742-6596/1016/1/012001
  • [20] Xie YM, Yang X, Shen J, Yan X, Ghaedizadeh A, Rong J, Huang X, Zhou S. Designing orthotropic materials for negative or zero compressibility. International Journal of Solids and Structures. 2014;51:4038–4051. https://doi.org/10.1016/j.ijsolstr.2014.07.024
  • [21] Grima JN, Caruana-Gauci R, Wojciechowski KW, Evans KE. Smart hexagonal truss systems exhibiting negative compressibil-ity through constrained angle stretching. Smart Materials and Structures. 2013;22:084015. https://doi.org/10.1088/0964-1726/22/8/084015
  • [22] Maruszewski TS, Wojciechowski KW. Anomalous defor-mation of constrained auxetic square. Review Advanced Mate-rial Science. 2010;23:169–174.
  • [23] Amin F, Ali MN, Ansari U, Mir M, Minhas MA, Shahid W. Auxetic Coronary Stent Endoprosthesis: Fabrication and Struc-tural Analysis. Journal of Applied Biomaterials & Functional Materials. 2015;13:127–135. https://doi.org/10.5301/jabfm.50002
  • [24] Akgun M, Eren R, Suvari F, Yurdakul T. Investigation of the effect of pique weave on auxetic performance and related fab-ric properties. The Journal of The Textile Insti-tute.2021;113(11):2369-2380. https://doi.org/10.1080/00405000.2021.1983978
  • [25] Critchley R, Corni I, Wharton JAA, Walsh FCC, Wood RJK, Stokes KR. A review of the manufacture, mechanical properties and potential applications of auxetic foams. Physica Status Sol-idi (b). 2013;250:1963–1982. https://doi.org/10.1002/pssb.201248550
  • [26] Ren X, Shen J, Tran P, Ngo TD, Xie YM. Auxetic nail: Design and experimental study. Composite Structures. 2018;184:288–298. https://doi.org/10.1016/j.compstruct.2017.10.013
  • [27] Zhang XY, Wang XY, Ren X, Xie YM, Wu Y, Zhou YY, Wang SL, Han CZ. A novel type of tubular structure with auxe-ticity both in radial direction and wall thickness. Thin-Walled Structures. 2021;163:107758. https://doi.org/10.1016/j.tws.2021.107758
  • [28] Luo C, Han CZ, Zhang XY, Zhang XG, Ren X, Xie YM. De-sign, manufacturing and applications of auxetic tubular struc-tures: A review. Thin-Walled Structures. 2021;163:107682. https://doi.org/10.1016/j.tws.2021.107682
  • [29] Luo C, Ren X, Han D, Zhang XG, Zhong R, Zhang XY, Xie YM. A novel concrete-filled auxetic tube composite structure: Design and compressive characteristic study. Engineering Struc-tures. 2022;268:114759. https://doi.org/10.1016/j.engstruct.2022.114759
  • [30] Askari M, Hutchins DA, Thomas PJ, Astolfi L, Watson RL, Abdi M, Ricci M, Laureti S, Nie L, Freear S., Wildman R, Tuck C, Clarke M, Woods E, Clare AT. Additive manufacturing of metamaterials: A review. Additive Manufacturing. 2020;36:101562. https://doi.org/10.1016/j.addma.2020.101562
  • [31] Saxena K.K., Das R., Calius E.P., Three Decades of Auxetics Research − Materials with Negative Poisson’s Ratio: A Review. Advanced Engineering Materials. 2016;18:1847–1870. https://doi.org/10.1002/adem.201600053
  • [32] Liu Y., Hu H., A review on auxetic structures and polymeric materials. Scientific Research and Essays. 2010;5:1052–1063.
  • [33] Jiang W, Ren X, Wang SL, Zhang XG, Zhang XY, Luo C, Xie YM, Scarpa F, Alderson A, Evans EE. Manufacturing, charac-teristics and applications of auxetic foams: A state-of-the-art review. Composites Part B: Engineering. 2022;235:109733. https://doi.org/10.1016/j.compositesb.2022.109733
  • [34] Carneiro VH, Meireles J, Puga H, Auxetic materials — A re-view. Materials Science-Poland. 2013;31:561–571. https://doi.org/10.2478/s13536-013-0140-6
  • [35] Love AEH, A treatise on the mathematical theory of elasticity, Dover Publications, New York, 1944.
  • [36] Lakes R. Foam Structures with a Negative Poisson’s Ratio. Science. 1987;235:1038–1040. https://doi.org/10.1126/science.235.4792.1038
  • [37] Chan N, Evans KE. Fabrication methods for auxetic foams. Journal of Materials Science. 1997;32:5945–5953. https://doi.org/10.1023/A:1018606926094
  • [38] Scarpa F, Yates JR, Ciffo LG, Patsias S. Dynamic crushing of auxetic open-cell polyurethane foam, Proceedings of the Insti-tution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science. 2002;216:1153–1156. https://doi.org/10.1243/09544060232102938
  • [39] Bezazi A. Scarpa F. Mechanical behaviour of conventional and negative Poisson’s ratio thermoplastic polyurethane foams under compressive cyclic loading. International Journal of Fa-tigue. 2007;29:922–930. https://doi.org/10.1016/j.ijfatigue.2006.07.015
  • [40] Bezazi A, Scarpa F. Tensile fatigue of conventional and nega-tive Poisson’s ratio open cell PU foams. International Journal of Fatigue. 2009;31:488–494. https://doi.org/10.1016/j.ijfatigue.2008.05.005
  • [41] Bianchi M, Scarpa FL, Smith CW. Stiffness and energy dissi-pation in polyurethane auxetic foams. Journal of Materials Sci-ence. 2008;43:5851–5860. https://doi.org/10.1007/s10853-008-2841-5
  • [42] Bianchi M, Scarpa F, Banse M, Smith CW. Novel generation of auxetic open cell foams for curved and arbitrary shapes. Ac-ta Materialia. 2011;59:686–691. https://doi.org/10.1016/j.actamat.2010.10.006
  • [43] Grima JN, Gatt R, Alderson A, Evans KE. On the potential of connected stars as auxetic systems. Molecular Simulation. 2005;31:925–935. https://doi.org/10.1080/08927020500401139
  • [44] Grima JN, Gatt R, Ellul B, Chetcuti E. Auxetic behaviour in non-crystalline materials having star or triangular shaped perfo-rations. Journal of Non-Crystalline Solids. 2010;356:1980–1987. https://doi.org/10.1016/j.jnoncrysol.2010.05.074
  • [45] Wang H, Lu Z, Yang Z, Li X. A novel re-entrant auxetic hon-eycomb with enhanced in-plane impact resistance. Composite Structures. 2019;208:758–770. https://doi.org/10.1016/j.compstruct.2018.10.024
  • [46] Guo M-F, Yang H, Ma L. 3D lightweight double arrow-head plate-lattice auxetic structures with enhanced stiffness and en-ergy absorption performance. Composite Structures. 2022;290:115484. https://doi.org/10.1016/j.compstruct.2022.115484
  • [47] Lan X, Meng L, Zhao J, Wang Z. Mechanical properties and damage characterizations of 3D double-arrowhead auxetic structure with high-relative-density realized via selective laser melting. European Journal of Mechanics-A/Solids. 2021;90:104386. https://doi.org/10.1016/j.euromechsol.2021.104386
  • [48] Chen Y-L, Wang X-T, Ma L. Damping mechanisms of CFRP three-dimensional double-arrow-head auxetic metamaterials. Polymer Testing. 2020;81:106189. https://doi.org/10.1016/j.polymertesting.2019.106189
  • [49] Wang X-T, Wang B, Wen Z-H, Ma L. Fabrication and me-chanical properties of CFRP composite three-dimensional dou-ble-arrow-head auxetic structures. Composites Science and Technology. 2018;164:92–102. https://doi.org/10.1016/j.compscitech.2018.05.014
  • [50] Qiao JX, Chen CQ. Impact resistance of uniform and func-tionally graded auxetic double arrowhead honeycombs. Interna-tional Journal of Impact Engineering. 2015;83:47–58. https://doi.org/10.1016/j.ijimpeng.2015.04.005
  • [51] Zhang Z, Wen Q, Li P, Hu H. Application of double arrow-head auxetic honeycomb structure in displacement measure-ment. Sensors and Actuators A: Physical. 2022;333:113218. https://doi.org/10.1016/j.sna.2021.113218
  • [52] Gibson, LJ, Ashby, MF, Schajer, GS, Robertson, CI. The me-chanics of two-dimensional cellular materials. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences. 1982;382:25–42. https://doi.org/10.1098/rspa.1982.0088
  • [53] Masters IG, Evans KE. Models for the elastic deformation of honeycombs. Composite Structures. 1996;35:403–422. https://doi.org/10.1016/S0263-8223(96)00054-2
  • [54] Hu LL, Zhou MZ, Deng H. Dynamic crushing response of auxetic honeycombs under large deformation: Theoretical anal-ysis and numerical simulation. Thin-Walled Structures. 2018;131:373–384. https://doi.org/10.1016/j.tws.2018.04.020
  • [55] Hu LL, Zhou MZ, Deng H. Dynamic indentation of auxetic and non-auxetic honeycombs under large deformation. Compo-site Structures. 2019;207:323–330. https://doi.org/10.1016/j.compstruct.2018.09.066
  • [56] Kolken HMA, Zadpoor AA, Auxetic mechanical metamateri-als. RSC Advances. 2017;7:5111–5129. https://doi.org/10.1039/C6RA27333E
  • [57] Gaspar N, Ren XJ, Smith CW, Grima JN, Evans KE. Novel honeycombs with auxetic behaviour. Acta Materialia. 2005;53:2439–2445. https://doi.org/10.1016/j.actamat.2005.02.006
  • [58] Smith CW, Grima J, Evans KE. A novel mechanism for gen-erating auxetic behaviour in reticulated foams: missing rib foam model. Acta Materialia. 2000;48:4349–4356. https://doi.org/10.1016/S1359-6454(00)00269-X
  • [59] Najafi M, Ahmadi H, Liaghat G. Experimental investigation on energy absorption of auxetic structures. Mater Today Pro-ceedings. 2021;34:350–355. https://doi.org/10.1016/j.matpr.2020.06.075
  • [60] Grima JN, Evans KE. Auxetic behavior from rotating triangles. Journal of Materials Science. 2006;41:3193–3196. https://doi.org/10.1007/s10853-006-6339-8
  • [61] Grima JN, Alderson A, Evans, KE. Negative poisson’s ratios from rotationg rectangles. Comput Methods Sci Technol. 2004;10:137–145. https://doi.org/10.12921/cmst.2004.10.02.137-145
  • [62] Grima JN, Evans KE. Auxetic behavior from rotating squares. Journal of Materials Science Letters. 2000;19:1563–1565.
  • [63] Grima JN, Farrugia P-S, Gatt R, Attard D. On the auxetic properties of rotating rhombi and parallelograms: A preliminary investigation. Phys Status Solidi(b). 2008;245:521–529. https://doi.org/10.1002/pssb.200777705
  • [64] Gatt R, Mizzi L, Azzopardi JI, Azzopardi KM, Attard D, Casha A, Briffa J, Grima JN. Hierarchical auxetic mechanical metamaterials. Scientific Reports. 2015;5:1–6. https://doi.org/10.1038/srep08395
  • [65] Kelvin WTB. The molecular tactics of a crystal, Clarendon Press; 1894.
  • [66] A. Alderson A, Alderson KL, Attard D, Evans KE, Grima JN, Gatt R, Miller W, Ravirala N, Smith CW, Zied K. Elastic con-stants of 3-, 4- and 6-connected chiral and anti-chiral honey-combs subject to uniaxial in-plane loading. Composites Science and Technology. 2010;70:1042–1048. https://doi.org/10.1016/j.compscitech.2009.07.009
  • [67] Hu LL, Luo ZR, Zhang ZY, Lian MK, Huang LS. Mechanical property of re-entrant anti-trichiral honeycombs under large de-formation. Composites Part B: Engineering. 2019;163:107–120. https://doi.org/10.1016/j.compositesb.2018.11.010
  • [68] Mousanezhad D, Haghpanah B, Ghosh R, Hamouda AM, Nayeb-Hashemi H, Vaziri A. Elastic properties of chiral, anti-chiral, and hierarchical honeycombs: A simple energy-based approach. Theoretical and Applied Mechanics Letters. 2016;6:81–96. https://doi.org/10.1016/j.taml.2016.02.004
  • [69] Ha CS, Plesha ME, Lakes RS. Chiral three-dimensional lattices with tunable Poisson’s ratio. Smart Materials and Structures. 2016;25:054005. https://doi.org/10.1088/0964-1726/25/5/054005
  • [70] Gatt R, Attard D, Farrugia P-S, Azzopardi KM, Mizzi L, Brin-cat J-P, Grima JN. A realistic generic model for anti-tetrachiral systems. Phys Status Solidi (b). 2013;250:2012–2019. https://doi.org/10.1002/pssb.201384246
  • [71] Grima JN, Gatt R, Farrugia P-S. On the properties of auxetic meta-tetrachiral structures. Phys Status Solidi(b). 2008;245:511–520. https://doi.org/10.1002/pssb.200777704
  • [72] Jiang Y, Li Y. 3D Printed Auxetic Mechanical Metamaterial with Chiral Cells and Re-entrant Cores. Scientific Reports. 2018;8:2397. https://doi.org/10.1038/s41598-018-20795-2
  • [73] Wu W, Qi D, Liao H, Qian G, Geng L, Niu Y, Liang J. De-formation mechanism of innovative 3D chiral metamaterials. Scientific Reports. 2018;8:12575. https://doi.org/10.1038/s41598-018-30737-7
  • [74] Ebrahimi H, Mousanezhad D, Nayeb-Hashemi H, Norato J, Vaziri A. 3D cellular metamaterials with planar anti-chiral to-pology. Materials & Design. 2018;145:226–231. https://doi.org/10.1016/j.matdes.2018.02.052
  • [75] Liu S, Lu G, Chen Y, Leong YW. Deformation of the Miura-ori patterned sheet. International Journal of Mechanical Scienc-es. 2015;99:130–142. https://doi.org/10.1016/j.ijmecsci.2015.05.009
  • [76] Lv C, Krishnaraju D, Konjevod G, Yu H, Jiang H. Origami based Mechanical Metamaterials. Scientific Reports. 2015,4: 5979. https://doi.org/10.1038/srep05979
  • [77] Bertoldi K, Vitelli V, Christensen J, Van Hecke M. Flexible mechanical metamaterials. Nature Reviews Materials. 2017;2:17066. https://doi.org/10.1038/natrevmats.2017.66
  • [78] Eidini M. Zigzag-base folded sheet cellular mechanical met-amaterials. Extreme Mechanics Letters. 2016;6:96–102. https://doi.org/10.1016/j.eml.2015.12.006
  • [79] De Bellis N. Bibliometrics and citation analysis: from the sci-ence citation index to cybermetrics. Scarecrow press; 2009.
  • [80] Yaoyang X, Boeing WJ. Mapping biofuel field: A bibliometric evaluation of research output. Renewable and Sustainable En-ergy Reviews. 2013;28:82–91. https://doi.org/10.1016/j.rser.2013.07.027
  • [81] Du H, Li N, Brown MA, Peng Y, Shuai Y. A bibliographic analysis of recent solar energy literatures: The expansion and evolution of a research field. Renewable Energy. 2014;66:696–706. https://doi.org/10.1016/j.renene.2014.01.018
  • [82] van Eck NJ, Waltman L. Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics. 2010;84:523–538. https://doi.org/10.1007/s11192-009-0146-3
  • [83] Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, Bernard A, Schulz J, Graf P, Ahuja B, Martina F. De-sign for Additive Manufacturing: Trends, opportunities, consid-erations, and constraints. CIRP Annals. 2016;65:737–760. https://doi.org/10.1016/j.cirp.2016.05.004
  • [84] Chen Z, Li Z, Li J, Liu C, Lao C, Fu Y, Liu C, Li Y, Wang P, He Y, 3D printing of ceramics: A review. Journal of the Euro-pean Ceramic Society. 2019;39:661–687. https://doi.org/10.1016/j.jeurceramsoc.2018.11.013
  • [85] Zhang Y, Wang S, Ji G, A Comprehensive Survey on Particle Swarm Optimization Algorithm and Its Applications. Mathemat-ical Problems in Engineering. 2015;2015:931256. https://doi.org/10.1155/2015/931256
  • [86] Ren X, Das R, Tran P, Ngo TD, Xie YM, Auxetic metamateri-als and structures: a review. Smart Materials and Structures. 2018;27:023001. https://doi.org/10.1088/1361-665X/aaa61c
  • [87] Körner C. Additive manufacturing of metallic components by selective electron beam melting - a review. International Materi-als Reviews. 2016;61:361–377. https://doi.org/10.1080/09506608.2016.1176289
  • [88] Gong H, Rafi K, Gu H, Janaki Ram GD, Starr T, Stucker B. Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting. Materials & Design. 2015;86:545–554. https://doi.org/10.1016/j.matdes.2015.07.147
  • [89] Babaee S, Shim J, Weaver JC, Chen ER, Patel N, Bertoldi K. 3D Soft Metamaterials with Negative Poisson’s Ratio. Ad-vanced Materials. 2013;25:5044–5049. https://doi.org/10.1002/adma.201301986
  • [90] Jiang J.W, Park HS. Negative poisson’s ratio in single-layer black phosphorus. Nature Communications. 2014;5:4727. https://doi.org/10.1038/ncomms5727
  • [91] Bückmann T, Stenger N, Kadic M, J. Kaschke J, Frölich A, Kennerknecht T., Eberl C., Thiel M., Wegener M., Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography. Advanced Materials. 2012;24:2710–2714. https://doi.org/10.1002/adma.201200584
  • [92] Yu X, Zhou J, Liang H, Jiang Z, Wu L, Mechanical metamate-rials associated with stiffness, rigidity and compressibility: A brief review. Progress in Materials Science. 2018;94:114–173. https://doi.org/10.1016/j.pmatsci.2017.12.003
There are 92 citations in total.

Details

Primary Language English
Subjects Automotive Engineering Materials
Journal Section Articles
Authors

Erhan Cetin 0000-0001-5551-6934

Sertac Samed Seyitoglu 0000-0002-6694-953X

Publication Date March 31, 2024
Submission Date October 11, 2023
Acceptance Date January 17, 2024
Published in Issue Year 2024 Volume: 8 Issue: 1

Cite

APA Cetin, E., & Seyitoglu, S. S. (2024). A bibliometric overview of research on auxetic structures: Trends and patterns. International Journal of Automotive Science And Technology, 8(1), 65-77. https://doi.org/10.30939/ijastech..1374313
AMA Cetin E, Seyitoglu SS. A bibliometric overview of research on auxetic structures: Trends and patterns. IJASTECH. March 2024;8(1):65-77. doi:10.30939/ijastech.1374313
Chicago Cetin, Erhan, and Sertac Samed Seyitoglu. “A Bibliometric Overview of Research on Auxetic Structures: Trends and Patterns”. International Journal of Automotive Science And Technology 8, no. 1 (March 2024): 65-77. https://doi.org/10.30939/ijastech. 1374313.
EndNote Cetin E, Seyitoglu SS (March 1, 2024) A bibliometric overview of research on auxetic structures: Trends and patterns. International Journal of Automotive Science And Technology 8 1 65–77.
IEEE E. Cetin and S. S. Seyitoglu, “A bibliometric overview of research on auxetic structures: Trends and patterns”, IJASTECH, vol. 8, no. 1, pp. 65–77, 2024, doi: 10.30939/ijastech..1374313.
ISNAD Cetin, Erhan - Seyitoglu, Sertac Samed. “A Bibliometric Overview of Research on Auxetic Structures: Trends and Patterns”. International Journal of Automotive Science And Technology 8/1 (March 2024), 65-77. https://doi.org/10.30939/ijastech. 1374313.
JAMA Cetin E, Seyitoglu SS. A bibliometric overview of research on auxetic structures: Trends and patterns. IJASTECH. 2024;8:65–77.
MLA Cetin, Erhan and Sertac Samed Seyitoglu. “A Bibliometric Overview of Research on Auxetic Structures: Trends and Patterns”. International Journal of Automotive Science And Technology, vol. 8, no. 1, 2024, pp. 65-77, doi:10.30939/ijastech. 1374313.
Vancouver Cetin E, Seyitoglu SS. A bibliometric overview of research on auxetic structures: Trends and patterns. IJASTECH. 2024;8(1):65-77.

Cited By

FARKLI EN/BOY ORANINA SAHİP DÖRTGENSEL KESİTLİ BİR KİRAL ÖKZETİK HÜCRESEL YAPININ TASARIM VE OPTİMİZASYONU
Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi
https://doi.org/10.54365/adyumbd.1440934
Experimental Investigation of Flow Drilling and Flow Tapping of Thin-Walled Square and Circular Hollow Sections
International Journal of Automotive Science And Technology
https://doi.org/10.30939/ijastech..1453441
Electric Vehicles: Manuscript of a Bibliometric Analysis Unveiling Trends, Innovations and Future Pathways
International Journal of Automotive Science And Technology
https://doi.org/10.30939/ijastech..1424879


International Journal of Automotive Science and Technology (IJASTECH) is published by Society of Automotive Engineers Turkey

by.png