Cationic dye (Methylene blue) was extract from waste water by using emulsified liquid membrane process. The membrane composed of two phases: organic and aqueous. D2EHPA, SPAN 80 and acid are the composition of aqueous phase, however the fuel oil represent the organic phase. The effect of different parameters such as the initial concentration of cationic dye (MB), the addition of salt (KCl/ NaCl/ Na2SO4), acid (HCl/ H2SO4/H3PO4) and the extractant concentration (10, 30 and 50 ppm) was examined using Box-Behnken design.
The optimization of the extraction has been showed that the extraction efficiency reach100% for the following optimum operating conditions: 30 ppm for the initial concentration of [BM]0, 10%w for the extracting (D2EHPA) with the presence of Na2SO4 and H2SO4. It can be said that the ELM method is efficient for the removal of methylene bleu.
Ministry of Higher Education and Scientific Research of Algeria
A16N01UN230120130063
We thank Prof. Abbes Boukhari Director of the LOMOP Research Laboratory and Dr Fethi Saoudi Head of the Process EngineeringDepartment, BadjMokhtar University of Annaba, for providing us with the necessary material resources.
A16N01UN230120130063
| Primary Language | English |
|---|---|
| Subjects | Environmental Engineering |
| Journal Section | Research Article |
| Authors | |
| Project Number | A16N01UN230120130063 |
| Publication Date | July 6, 2022 |
| DOI | https://doi.org/10.32571/ijct.986667 |
| IZ | https://izlik.org/JA52EZ78NU |
| Published in Issue | Year 2022 Volume: 6 Issue: 1 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.