On power transformers energy efficiency based load transfer analysis

Year 2018, , 115 - 118, 13.12.2018

Zeynep Kaya , Nazım İmal , Oğuz Gökhasan

https://doi.org/10.31593/ijeat.442589

Cited By: 2

Abstract

Transformers have an important role from the production of electricity energy to consumption. Because they are responsible for ensuring that power transfer is carried out appropriately in many stages. Therefore, power transformers work in many places, from the production phase of electricity to the transmission and distribution phases. If various time periods are taken into consideration for energy using, power transformers can operate at small powers or very small powers. This small-power operation, which can be defined even as minor quantity, is counter-productive as a proportional increase in energy loss. The small working power, because of this loss ratio, is not taken into consideration; but considering large number of power transformers in annual periods, it can cause the serious losses and the costs emerge. In this paper, we propose a dual transformer control model in which apparent time periods with little load are determined by software, and in those periods, the load is fed by power transformers of smaller power or fewer. In this model, we worked for reducing the amount of power loss and energy costs during periods. Reduced load is demonstrated in following parts by statistical results.

Keywords

power transformers, load transfer, energy efficiency

References

• Elsaharty M. A., Candela, J. I., Rodriguez P., "Custom Power Active Transformer for Flexible Operation of Power Systems", IEEE Transactions on Power Electronics, Vol. 33 Issue 7, p5773-5783, 11p, Jul2018.
• Bayındır R., Demirbaş Ş., Bektaş A., Çolak İ., In Turkish “Monitoring of Electric Energy in an Industrial Business, Erciyes University, Journal of the Institute of Science, Issue 24 (1-2), pp 154-164, 2008.
• Renedo C. J., Santisteban A., Ortiz F., Olmo C., Ortiz A., "Evaluation of the Optimal Connection of Power Transformers in the Substations of a Hospital", Energies (19961073).,Vol. 11 Issue 2, Feb2018.
• Bellao C., Ape L., "Energy Savings In Electrical Distribution Systems", Consulting-Specifying Engineer, Apr 2016.
• Ekiz A., Tümay M., In Turkish "Harmonics occuring in the Factories, Modeling of Using Matlab/ Simulink", 10th National Congress of Electric - Electronic - Computer Engineering, İstanbul, 2003.
• Almeida D. A. S., Fernando B. M., "Energy-Efficient Distribution Transformers In Europe: Impact of Ecodesign Regulation", Energy Efficiency; Apr 2016.
• Booth C., McDonald J.R., "The Use of Artificial Neural Networks for Condition Monitoring of Electrical Power Transformers", Neurocomputing, Volume 23, Issues 1–3, 7, Pages 97- 109, December 1998.
• Nuroğlu F., M., Arsoy A.,B., In Turkish "A New Approach to Efficient Operation of Distributed Generation Resources", III. Energy Efficiency and Quality Symposium, Kocaeli 2009.
• Işık F., Kömürgöz G., Bürkav H., In Turkish "The Importance of Using Low-Loss Transformers in Renewable Energy Plants", 22. International Energy And Environment Conference, İstanbul 2016.
• Meral M. E., Teke A., Tümay M., In Turkish "Energy Efficiency in Electrical Installations", Uludağ University Journal of Engineering-Architecture Faculty, Volume 14, Number 1, 2009.
• https://journal.uptimeinstitute.com/new-system-combats-data-center-pq-concerns, Date of acces; February 25, 2018.
• Bilici M. S., In Turkish "Energy Efficiency In Transformers, Using of Amorp Core", III. National Congres and Exhibition of Electrical Installations, İzmir, 2013.