Alternative heat insulation method for rigid construction walls

Year 2021, Volume: 6 Issue: 1, 19 - 35, 29.06.2021

Abdullah Dağdeviren , Bahadir Acar , Murat Aydın

Abstract

The purpose of heat insulation is to minimize the heat transfer between the interior and external environment. Besides, it helps to prevent the structure of the constructions from the harmful heat effects because of heat transfer. This study presents an alternative method to achieve heat insulation in concrete walls. 4 various heat insulation materials as wood shavings, fiberglass, granule rubber, and styrofoam were added into the concrete wall parts and an enclosed volume was created using those. The interior temperature of the enclosed volume increased using resistance and the temperature was measured with a thermocouple as well. In order to calculate the thermal conductivity of heat-insulated walls, measured temperature, power consumption, and surface area were used. As a result, it was shown that the wood shavings insulation in concrete had a lower thermal conductivity coefficient than others and much efficiency as well. Besides, the presented methodology could help to prevent lacking energy resources and to save economical incomes.

Keywords

heat insulation, Heat Transfer, Thermal Conductivity

References

• Yapı Endüstri Merkezi, “Türk yapı sektörü raporu 2006”, Güzel Sanatlar Matbaası 2006: 1-26.
• Gürbağ, H., “Sanayide yalıtıma ekonomik açıdan bakış”, Isı Bilimi ve Tekniği Dergisi 1987: 10; 11.
• Campanale, M., Moro, L. “Thermal conductivity of moist autoclaved aerated concrete: experimental comparison between heat flow method (HFM) and transient plane source technique (TPS)”, Transp. Porous Media 2016: 113; 345–355.
• Özer, N., “Atıklardan üretilen ısı yalıtım malzemelerinin yaygın kullanılan ısı yalıtım malzemeleri ile karşılaştırılması”, MSc Thesis, Istanbul Technical University, 2017.
• Woloszyn, M., Kalamees, T., Abadie, M.O., Steeman, M., Kalagasidis, S.A. “The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings”, Building Environ. 2009: 44; 515–524.
• Shea, A., Wall, K., Walker, P. “Evaluation of the thermal performance of an innovative pre-fabricated natural plant fibre building system”, Build. Serv. Eng. Res. Technol. 2013: 34(4); 369-380.
• Zach, J., Korjenic, A., Petranek, V., Hroudova, J., Bednar, T. “Performance evaluation and Research of alternative thermal insulations based on sheep wool”, Energy and Buildings 2012: 49; 246-253.
• Korjenic, A., Petranek, V., Zach, J., Hroudova, J. “Development and performance evaluation of natural thermal-insulation materials composed of renewable resource”, Energy Build. 2011: 43; 2518–2523.
• Charca, S., Noel, J., Andia, D., Flores, J., Guzman, A., Renteros, C., Tumialan, J. “Assessment of ichu fibres as non-expensive thermal insulation system for the Andean regions”, Energy Build. 2015: 108; 55-60.
• Wei, K., Lv, C., Chen, M., Zhou, X., Dai, Z., Shen, D. “Development and performance evaluation of a new thermal insulation material from rice straw using high frequency hot-pressing”, Energy Build. 2015: 87; 116-122.
• Deque, F., Ollivier, F., Roux, J.J. “Effect of 2D modelling of thermal bridges on the energy performance of buildings”, Energy and Buildings 2001: 33; 583-587.