The Investigation of Wear Behaviour of Dual Phase Steel DP600

Abstract

Dual phase steels have been widely used in many applications in the automotive industry.  In this study, the wear behavior of commercially available DP600 steel with dual-phase structure are investigated.  The wear rate, volume loss and friction coefficient are used to optimize wear resistance of DP600 steel with dual-phase. Abrasive and Adhesive wear tests were carried out to determine the abrasive friction coefficient of the DP600 steel.

Experimental studies show that the ferrite and martensite phases based on microstructures of the DP600 steel with dual-phase structure have an effect on tensile and wear tests. The wear resistance of DP600 steel can be controlled and optimized with wear condition (the wear rate, volume loss and friction coefficient). 

Keywords

• Dual Phase Steel,Rolling,Flat Product,Wear,Abrasive,Adhesive

References

1. Rashid M.S., “GM980X – A Unique High Strenght Sheet Steel with Superior Formability”, SAE, Preprint 760206, (1976).
2. Demir, B., “Ereğli Demir ve Çelik Fabrikaları Sürekli Tavlama Hatlarında Çift-Fazlı Çelik Üretilebilirliğinin İncelenmesi”, Doktora Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, 159 s., Ankara, 2003.
3. Coldren A.P. & Eldis T., “Using CCT Diagrams to Optimize the Compositions of an as-Rolled Dual Phase Steels”, Jornal of Metals, vol:4, no:4, pp:41-48, 1980.
4. Hansen S.S. & Bramfitt B.L., “Hot Strip Mill Processing of Dual-Phase Steels” int Conf. On steel Rolling, Sci, and Tech. Of flat Roolled Poducts, ISIJ, vol:4, no:7, pp:1297-1308, Tokyo, 1980.
5. İSDEMİR Sıcak Haddeleme Tesisleri, Hatay (2016)
6. Gavas, M., Aydın, M., Yaşar, K., Altunpak, Y., “Üretim Yöntemleri ve İmalat Teknolojileri”, Ankara, 2013.
7. Ovalı, İ., “Küresel Grafitli Dökme Demirlerin Yüzeyinde Çil Oluşumu ve Östemperleme Isıl İşleminin Mikroyapı ve Mekanik Özellikler Üzerine Etkisi”, Gazi Üniversitesi Fen Bilimleri Enstitüsü Doktora Tezi, Ankara, 2012.
8. Çapan, L., “ Metallere Plastik Şekil Verme ” Çağlayan Kitapevi İstanbul, 2003.

9. Andres, M,R,. “Tribological behaviour of DP600 dual phase steel on uni- and bi-directional discontinuous sliding wear”, Madrid, 2015.