Abstract
References
- Dr. Ahmed Bellagi, U. R. Thermique et Thermodynamique des Procedes Industriels, Ecole Nationale d'ingenieurs de Monastir (E.N.I.M.), Avenue Ibn El Jazzar, 5060 Monastir, Tunisia, E-mail address: a.bellagi@enim.rnu.tn
- Dr. Joachim Gross, Institute of Thermodynamics and Thermal Process Engineering, University of Stuttgart, Pfaffenwaldring 9, D-70569 Stuttgart, Germany, E-mail: gross@itt.uni-stuttgart.de
- Dr. Santiago Velasco, Departamento de Fisica Aplicada, Universidad de Salamanca, E-37008 Salamanca, Spain, E-mail: santi@usal.es
- Dr. Ehsan Sanjari, Department of Mechanics, Tiran Branch, Islamic Azad University, Isfahan, Iran, E-mail: sanjary@gmail.com
Wagner Equation Predicting Entire Curve for Pure Fluids from Limited VLE Data: Critical and Normal Boiling Points & Acentric Factor
Abstract
Wagner constants are estimated from VLE predictions
based solely on the critical and normal boiling points, and acentric factor. The predictions come from the standard forms of 1) Riedel and 2) Ambrose-Walton, 3) a modified
Riedel equation resulting from forcing the value of K to provide zero error at
the reduced temperature of 0.7, and 4) a modified Ambrose-Walton equation
resulting from using a pseudo acentric factor that provides zero error at the
normal boiling point. Reduced vapor
pressure values obtained using these Wagner constants are compared to those
generated by using literature-reported Wagner constants that are applicable for
the entire two-phase VLE curve for 72 species. It is shown that the Wagner equation parameterized using VLE predictions
from such correlations can provide better accuracy than the underlying source
correlations themselves, and it can exhibit less error than a parameterization
using a limited interval of experimental data.
References
- Dr. Ahmed Bellagi, U. R. Thermique et Thermodynamique des Procedes Industriels, Ecole Nationale d'ingenieurs de Monastir (E.N.I.M.), Avenue Ibn El Jazzar, 5060 Monastir, Tunisia, E-mail address: a.bellagi@enim.rnu.tn
- Dr. Joachim Gross, Institute of Thermodynamics and Thermal Process Engineering, University of Stuttgart, Pfaffenwaldring 9, D-70569 Stuttgart, Germany, E-mail: gross@itt.uni-stuttgart.de
- Dr. Santiago Velasco, Departamento de Fisica Aplicada, Universidad de Salamanca, E-37008 Salamanca, Spain, E-mail: santi@usal.es
- Dr. Ehsan Sanjari, Department of Mechanics, Tiran Branch, Islamic Azad University, Isfahan, Iran, E-mail: sanjary@gmail.com
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Regular Original Research Article |
| Authors | |
| Publication Date | September 1, 2018 |
| Published in Issue | Year 2018 |