Interleaved High Step-up DC-DC Converter with Diode-Capacitor Multiplier Cell and Ripple-Free Input Current

Abstract

In this paper interleaving and switched-capacitor techniques are used to introduce a high step-up DC-DC converter for renewable energy systems application. The proposed converter delivers high voltage gain without utilizing transformer or excessive duty cycle and features ripple-free input current which results in lower conduction losses and decreased electromagnetic interference (EMI). Lower output capacitance is another advantage of proposed converter, leading to smaller size and lower cost. Furthermore lower voltage stress on switches allows the utilization of switches with low resistance. Simulation results verify the performance of suggested converter.

Keywords

• ripple-free input current; high step-up; switched-capacitor; interleaved technique; low switch voltage stress.

References

1. J. C. Rosas-Caro, J. M. Ramirez, F. Z. Peng, and A. Valderrabano, “A DC–DC multilevel boost converter,” IET Power Electron., vol. 3, no. 1, pp. 129–137, Jan. K. B. Park, G. W. Moon, and M. J. Youn, “Non-isolated high step-up stacked converter based on boost-integrated isolated converter,” IEEE Trans. Power Electron., vol. , no. 2, pp. 577–587, Feb. 2011.
2. J. Leyva-Ramos, M.G. Ortiz Lopez, L.H. Diaz Salierna, J.A. Morales Saldana, “Switching regulator using a quadratic boost converter for wide DC conversion ratios,” IET Power Electron., vol. 2, no. 5, pp. 605–613, Sep. F. L. Luo and H. Ye, “Positive output cascade boost converters,” Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 151, no. 5, pp. 590–606, Sep. 2004.
3. F. L. Luo and H. Ye, “Positive output multiple-lift push- pull switched capacitor Luo-converters,” IEEE Trans. Ind. Electron., vol. 51, no. 3, pp. 594–602, Jun. 2004.
4. L. S. Yang, T. J. Liang, H. C. Lee, and J. F. Chen, “Novel high step-up DC-DC converter with coupled inductor and voltage-doubler circuits,” IEEE Trans. Ind. Electron., vol. , no. 9, pp. 4196–4206, Sep. 2012.
5. B. Axelrod, Y. Berkovich, and A. Ioinovici, “Switched coupled-inductor cell for dc-dc converters with very large conversion ratio,” inProc. IEEE IECON Conf., 2006, pp. –2371.
6. O. Abutbul, A. Gheriitz, Y. Berkovich, and A. loinovici, “Step-Up switching-mode converter with high voltage gain using a switched-capacitor circuit,” IEEE Trans. Circuits Syst., vol. 50, no.8, pp. 1098–1102, Aug. 2003.
7. S. M. Chen, T. J. Liang, L. S. Yang, and J. F. Chen, “A cascaded high step-up DC–DC converter with single switch for micro source applications,” IEEE Trans. Power Electron., vol. 26, no. 4, pp. 1146–1153, Apr.
8. Y. Berkovich and B. Axelrod, “Switched-coupled inductor cell for DC–DC converters with very large conversion ratio,” IET Power Electron., vol. 4, no. 3, pp. 309–315, Mar. 2011.

9. Y. P. Hsieh, J. F. Chen, T. J. Liang, and L. S. Yang, “Novel high step-up DC–DC converter with coupled- inductor and switched-capacitor techniques,” IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 998–1007, Feb.
10. S. C. Tan, S. Bronstein, M. Nur, Y. M. Lai, A. Ioinovici, and C. K. Tse, “Variable structure modelling and design of switched-capacitor converters,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 56, no. 9, pp. –2142, Sep. 2009.
11. L. C. Yang, T. J. Liang, H. C. Lee and J. F. Chen, “Novel High Step-Up DC–DC Converter With Coupled-Inductor and Voltage-Doubler Circuits,” IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4196–4206, Sep. 2011.
12. P. Zumel, O. Garcia, J. A. Cobos, and J. Uceda, “EMI reduction by interleaving of power converters,” in Proc. IEEE Appl. Power Electron. Conf., 2004, pp. 688–694.
13. Y. Jang and M. M. Jovanovic, “Interleaved boost converter with intrinsic voltage-doubler characteristic for universal-line PFC front end,” IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1394-1401, Jul. 2007.
14. K. C. Tseng, and C. C. Huang, “High Step-Up High- Efficiency Multiplier Module for Renewable Energy System,” IEEE Trans. Ind. Electron., vol. 61, no. 3, pp. 1311- , Mar. 2014. Converter With Voltage
15. L. Sanghyuk, K. Pyosoo, and C. Sewan, “High step-up soft-switched converters using voltage multiplier cells,” IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3379– , Jul. 2013.
16. C. T. Pan, and C. M. Lai, “A high efficiency high step-up converter with low switch voltage stress for fuel cell system applications,” IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 1998-2006, Jun. 2010.
17. J.-M. Kwon, and B.-H. Kwon, “High Step-Up Active- Clamp Converter With Input-Current Doubler and Output-Voltage Doubler for Fuel Cell Power Systems,” IEEE Trans. Power Electron, vol. 24, no. 1, pp. 108-115, Jan. 2009.
18. Y. Hu, W. Xiao, W. Li, and X. He, “Three-phase interleaved high-step-up converter with coupled-inductor- based voltage quadrupler,” IET Power Electron., vol. 7, no. 7, pp. 1841–1849, Jul. 2014.