HAREKETLİ PROTEZLERDE DİJİTAL ÜRETİM TEKNİKLERİNİN GÜNCEL DURUMU

Yıl 2024, Cilt: 3 Sayı: 2, 20 - 27, 18.07.2024

Berkay Atılgan , Fatma Ünalan , Canan Bural

Öz

Teknoloji alanındaki gelişmeler diş hekimliğinde tasarım alanında olduğu gibi hareketli protezlerin üretim yöntemlerinde de son yıllarda kullanılmaya başlanmıştır. Dijital sistemler kullanılarak üretilen hareketli protezler birçok avantaj sağlamaktadır. Hekimler için hasta başında geçirilen süreyi azaltmakta ve daha az randevu ile hastaya protezinin teslimine olanak sağlamaktadır. Uzun süren laboratuvar aşamaları azaltılır ve teknisyenler için daha kısa sürede, daha doğru protezler üretilmesini sağlamaktadır. Hareketli protezlerin dijital yöntemlerle üretimi için birbirinden farklı sistemler mevcuttur. Günümüzde kullanılan hareketli protez üreten dijital sistemler eksiltmeli ve eklemeli üretim tekniğini kullanmaktadır. Bu derlemenin amacı hareketli protezlerde dijital üretim teknikleriyle ilgili bilgi sağlamaktır.

Anahtar Kelimeler

Dijital hareketli protezler, CAD/CAM sistemleri, Dijital iş akışı

Kaynakça

• Alifui-Segbaya, F., R. J. Williams and R. George (2017). "Additive Manufacturing: A Novel Method for Fabricating Cobalt-Chromium Removable Partial Denture Frameworks." The European journal of prosthodontics and restorative dentistry 25(2): 73-78.
• Andreescu, C. F., D. L. Ghergic, O. Botoaca, V. Hancu, A. M. Banateanu and D. N. Patroi (2018). "Evaluation of different materials used for fabrication of complete digital denture." Mater. Plast 55: 124-128.
• Avelino, M. E. L., R. T. F. Costa, T. E. L. Vila-Nova, B. C. do Egito Vasconcelos, E. P. Pellizzer and S. L. D. Moraes (2024). "Clinical performance and patient-related outcome measures of digitally fabricated complete dentures: A systematic review and meta-analysis." The Journal of Prosthetic Dentistry.
• Ayman, A.-D. (2017). "The residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins." Electronic physician 9(7): 4766.
• Baba, N. Z., B. J. Goodacre, C. J. Goodacre, F. Müller and S. Wagner (2021). "CAD/CAM complete denture systems and physical properties: A review of the literature." Journal of prosthodontics 30(S2): 113-124.
• Bessadet, M., N. Drancourt and N. El Osta (2024). "Time efficiency and cost analysis between digital and conventional workflows for the fabrication of fixed dental prostheses: A systematic review." The Journal of Prosthetic Dentistry.
• Bidra, A. S., T. D. Taylor and J. R. Agar (2013). "Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives." The Journal of prosthetic dentistry 109(6): 361-366.
• BINRAYES, A. F. (2021). "CAD/CAM COMPLETE DENTURES-THE DENTCA SYSTEM. A CASE REPORT." International Journal of Medical Dentistry 25(1).
• Bonnet, G., C. Batisse, M. Bessadet, E. Nicolas and J.-L. Veyrune (2017). "A new digital denture procedure: a first practitioners appraisal." BMC oral Health 17: 1-13.
• Choi, W., Y.-H. Woo, H.-S. Kim and J. Paek (2018). "Comparison of internal adaptation of removable partial denture metal frameworks made by lost wax technique and printing technique of pattern using CAD." The Journal of Korean Academy of Prosthodontics 56(1): 17-24.
• Contrepois, M., C. Sireix, A. Soenen, J.-P. Pia and J.-F. Lasserre (2018). "Complete denture fabrication with CAD/CAM technology: a case report." International Journal of Esthetic Dentistry 13(1).
• Eick, J. D. (1977). "Biological properties of denture base resins." Dental Clinics of North America 21(2): 459-464.
• ERGÜN, G. (2016). "Konvansiyonel ve İmplant Üstü Protezlerde Kullanılan Kaide Materyallerinde Güncel Gelişmeler." Turkiye Klinikleri J Prosthodont-Special Topics 2(3): 35-44.
• Goodacre, C. J., A. Garbacea, W. P. Naylor, T. Daher, C. B. Marchack and J. Lowry (2012). "CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data." The Journal of prosthetic dentistry 107(1): 34-46.
• Hwang, H.-J., S. J. Lee, E.-J. Park and H.-I. Yoon (2019). "Assessment of the trueness and tissue surface adaptation of CAD-CAM maxillary denture bases manufactured using digital light processing." The Journal of prosthetic dentistry 121(1): 110-117.
• Janeva, N. M., G. Kovacevska, S. Elencevski, S. Panchevska, A. Mijoska and B. Lazarevska (2018). "Advantages of CAD/CAM versus conventional complete dentures-a review." Open access Macedonian journal of medical sciences 6(8): 1498.
• Jeong, M., K. Radomski, D. Lopez, J. T. Liu, J. D. Lee and S. J. Lee (2023). "Materials and Applications of 3D Printing Technology in Dentistry: An Overview." Dentistry Journal 12(1): 1.
• Jevremović, D., V. Kojić, G. Bogdanović, T. Puškar, D. Eggbeer, D. Thomas and R. Williams (2011). "A selective laser melted Co-Cr alloy used for the rapid manufacture of removable partial denture frameworks: Initial screening of biocompatibility." Journal of the Serbian Chemical Society 76(1): 43-52.
• Kalberer, N., A. Mehl, M. Schimmel, F. Müller and M. Srinivasan (2019). "CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness." The Journal of prosthetic dentistry 121(4): 637-643.
• Kanakaraj, S., H. Kumar and R. Ravichandran (2021). "An update on CAD/CAM removable complete dentures: A review on different techniques and available CAD/CAM denture systems." International Journal of Applied Dental Sciences 7(1): 491-498.
• Kawahata, N., H. Ono, Y. Nishi, T. Hamano and E. Nagaoka (1997). "Trial of duplication procedure for complete dentures by CAD/CAM." Journal of oral rehabilitation 24(7): 540-548.
• Lima, J. M. C., L. C. Anami, R. M. Araujo and C. A. Pavanelli (2014). "Removable partial dentures: use of rapid prototyping." Journal of Prosthodontics 23(7): 588-591.
• Maeda, Y., M. Minoura, S. Tsutsumi, M. Okada and T. Nokubi (1994). "A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures." international Journal of Prosthodontics 7(1).
• Moon, W., S. Kim, B.-S. Lim, Y.-S. Park, R. J.-Y. Kim and S. H. Chung (2021). "Dimensional accuracy evaluation of temporary dental restorations with different 3D printing systems." Materials 14(6): 1487.
• Oh, K. C., J. Jeon and J.-H. Kim (2021). "Fabrication of a removable partial denture combining conventional and digital techniques." The Journal of Prosthetic Dentistry 125(4): 588-591.
• Osman-Latib, Y., C. P. Owen and M. Thokoane (2023). "A Preliminary Study on the Accuracy of Cast Metal Removable Partial Denture Frameworks Produced from Wax, Printed, and Milled Patterns." Int J Prosthodont 36(6): 730-737.
• Pereyra, N. M., J. Marano, G. Subramanian, S. Quek and D. Leff (2015). "Comparison of patient satisfaction in the fabrication of conventional dentures vs. DENTCA (CAD/CAM) dentures: A case report." Journal of the New Jersey Dental Association 86(2): 26-33.
• Peroz, S., I. Peroz, F. Beuer, M. von Stein-Lausnitz and G. Sterzenbach (2022). "Digital versus conventional complete dentures: A randomized, controlled, double-blinded crossover trial." The Journal of Prosthetic Dentistry.
• Pillai, S., A. Upadhyay, P. Khayambashi, I. Farooq, H. Sabri, M. Tarar, K. T. Lee, I. Harb, S. Zhou and Y. Wang (2021). "Dental 3D-printing: transferring art from the laboratories to the clinics." Polymers 13(1): 157.
• Quan, H., T. Zhang, H. Xu, S. Luo, J. Nie and X. Zhu (2020). "Photo-curing 3D printing technique and its challenges." Bioactive materials 5(1): 110-115.
• Revilla‐León, M. and M. Özcan (2019). "Additive manufacturing technologies used for processing polymers: current status and potential application in prosthetic dentistry." Journal of Prosthodontics 28(2): 146-158.
• Sokolowski, A., D. Horak, A. Behlau, C. Madreiter-Sokolowski, M. Lorenzoni and A. Sokolowski (2024). "Evaluation of two printing techniques for maxillary removable partial denture frameworks." J Prosthet Dent.
• Steinmassl, P.-A., F. Klaunzer, O. Steinmassl, H. Dumfahrt and I. Grunert (2017). "Evaluation of Currently Available CAD/CAM Denture Systems." International Journal of Prosthodontics 30(2).
• Sulaiman, T. A. (2020). "Materials in digital dentistry—A review." Journal of Esthetic and Restorative Dentistry 32(2): 171-181.
• Takaichi, A., K. Fueki, N. Murakami, T. Ueno, Y. Inamochi, J. Wada, Y. Arai and N. Wakabayashi (2022). "A systematic review of digital removable partial dentures. Part II: CAD/CAM framework, artificial teeth, and denture base." Journal of Prosthodontic Research 66(1): 53-67.
• Tamimi, F., B. Almufleh, E. Caron and O. Alageel (2020). "Digital removable partial dentures." Clinical Dentistry Reviewed 4: 1-12.
• Villias, A., H. Karkazis, S. Yannikakis, A. Theocharopoulos, N. Sykaras and G. Polyzois (2021). "Current status of digital complete dentures technology." Prosthesis 3(3): 229-244.
• Wang, C., Y.-F. Shi, P.-J. Xie and J.-H. Wu (2021). "Accuracy of digital complete dentures: A systematic review of in vitro studies." The Journal of prosthetic dentistry 125(2): 249-256.
• Wood, D. J. (2012). Techniques in complete denture technology, John Wiley & Sons.
• Yan, G.-D., W.-H. Liao, N. Dai, L. Yang, Y.-G. Gao, S.-Y. Zhu and Y.-H. Cai (2009). The computer-aided design and rapid prototyping fabrication of removable partial denture framework. 2009 2nd IEEE International Conference on Computer Science and Information Technology, IEEE.
• Ziaei, M., F. Bajoghli, M. Sabouhi, M. Jowkar, F. Nadian and F. Manshaei (2024). "Evaluating the Marginal and Internal Discrepancy of Nickel–Chrome Copings Made on Fixed Partial Denture Implants with Conventional and 3D Printing Techniques." The Journal of Contemporary Dental Practice 24(11): 826-833.