TR
EN
Otoklav Isı Değiştirgecinin Kapasitesinin Artırılması Üzerine Teorik Ve Pratik Çalışma
Abstract
Otomobil ön camı üretim prosesinin son adımı, yüksek basınç ve sıcaklık odası şeklindeki otoklav içindeki otomobil camlarının laminasyon işlemidir. Bunun için önce otoklavın basıncının ve sıcaklığının arttırılması gerçekleştirilir. Sonra soğutma ve arkasından havanın dışarıya atılması ile süreç tamamlanır. Çevrim süresinin kısaltılması amacıyla otoklav çevrim süresinde değişkenliğe neden olan unsurlar ve işletme parametreleri ısı geçişi yasalarına göre analiz edilmiştir. Bunu esas alan tasarım değişiklikleri karşılaştırmalı olarak değerlendirilmiştir. En iyi ve en uygun olan tasarım imal edilerek devreye alınmıştır. Otoklava ait tüm tesisatın tasarım öncesi ve tasarım sonrası işletme parametreleri ölçülerek sonuçlar karşılaştırılmıştır.Yapılan teorik ve uygulamalı çalışmalar, hedeflenen ürün kalitesini düşürmeden, enerji yoğun tesisat olarak fonksiyon gören otoklavda, soğutma süresinin % 20 azaltılmasının olanaklı ve tekrarlanabilir olduğunu kanıtlamıştır
Keywords
Details
Primary Language
English
Subjects
-
Journal Section
-
Publication Date
June 1, 2010
Submission Date
June 1, 2010
Acceptance Date
-
Published in Issue
Year 2010 Volume: 30 Number: 2
APA
Can, A., & Kantürer, T. (2010). The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger. Journal of Thermal Science and Technology, 30(2), 69-76. https://izlik.org/JA23NG87ZF
AMA
1.Can A, Kantürer T. The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger. Journal of Thermal Science and Technology. 2010;30(2):69-76. https://izlik.org/JA23NG87ZF
Chicago
Can, Ahmet, and Tamer Kantürer. 2010. “The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger”. Journal of Thermal Science and Technology 30 (2): 69-76. https://izlik.org/JA23NG87ZF.
EndNote
Can A, Kantürer T (June 1, 2010) The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger. Journal of Thermal Science and Technology 30 2 69–76.
IEEE
[1]A. Can and T. Kantürer, “The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger”, Journal of Thermal Science and Technology, vol. 30, no. 2, pp. 69–76, June 2010, [Online]. Available: https://izlik.org/JA23NG87ZF
ISNAD
Can, Ahmet - Kantürer, Tamer. “The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger”. Journal of Thermal Science and Technology 30/2 (June 1, 2010): 69-76. https://izlik.org/JA23NG87ZF.
JAMA
1.Can A, Kantürer T. The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger. Journal of Thermal Science and Technology. 2010;30:69–76.
MLA
Can, Ahmet, and Tamer Kantürer. “The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger”. Journal of Thermal Science and Technology, vol. 30, no. 2, June 2010, pp. 69-76, https://izlik.org/JA23NG87ZF.
Vancouver
1.Ahmet Can, Tamer Kantürer. The Theoretical and Practical Study about Increasing the Capacity of Autoclave Heat Exchanger. Journal of Thermal Science and Technology [Internet]. 2010 Jun. 1;30(2):69-76. Available from: https://izlik.org/JA23NG87ZF