Investigation of the Effects of EDM Parameters on Surface Roughness

Serkan Yaman; Orhan Çakır

Investigation of the Effects of EDM Parameters on Surface Roughness

Abstract

In this experiment a novel machining methodology is presented for hardened powder tool steel (PMD23) which has better mechanical properties than conventional high speed steels. Electric discharge machining (EDM) is a non-traditional method that mainly used for extremely hard and complex shaped metals which is very difficult to machine with conventional methods. Effects of the electric discharge machining on surface roughness (Ra) and material removal rate (MRR) is experimentally studied. The selected machining parameters were current (12, 16 and 20A), pulse on time (600, 400, and 200µs) and time interval (400, 200 and 100µs). Changes on the EDM parameters result in the changes in the surface roughness and material removal rate, higher values of current, pulse on time and time interval increased the Ra and MRR.

Keywords

References

[1] Hui, R.K. (2017). A Revıew Based Paper on Investigation of Process Parameters and Optimization in EDM, International Journal of Engıneering Sciences & Research Technology, 640-647.
[2] Castillo, I.H., López, O.S., Romero, G.A.L., & Roldán, C.H.C. (2018). An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel. Ingeniería e Investigación, 38(2), 90–96.
[3] Chandramouli, S., & Eswaraiah, K. (2018). Experimental investigation of EDM process parameters in machining of 17-4 PH Steel using taguchi method. Materials Today: Proceedings, 5(2), 5058–5067.
[4] Mahto, D. G., & Singh, N. (2017). Experimental Study of Process Parameters through Dissimilar Form of Electrodes in EDM Machining. SSRN Electronic Journal.
[5] Das, P. P., Gupta, P., Das, S., Pradhan, B. B., & Chakraborty, S. (2018). Application of grey-fuzzy approach in parametric optimization of EDM process in machining of MDN 300 steel. IOP Conference Series: Materials Science and Engineering, 297, 012013.
[6] Raman, K., Sathiya, G.K., Saisujith, K., Mai, P. (2015). Effect of Machining Parameters in Electrical Discharge Machining of D2 Tool Steel. International Journal of Science and Research (IJSR), 6(7), 1634–1637.
[7] El-Hofy, Hassan Abdel-Gawad. Advanced Machining Processes Nontraditional and Hybrid Machining Processes. McGraw-Hill, 2005.
[8] Kiyak, M., Cakir, O. (2007). Examination of Machining Parameters on Surface Roughness in EDM of Tool Steel. Journal of Materials Processing Technology, 191(1), 141–144. [9] Mishra, B.P., & Routara, B.C. (2017). Impact of Induction Hardened Workpiece Hardness on EDM Performance, Materials and Manufacturing Processes, 33(6), 626–633.

[10] Nadpara, V.J., & Choudhary, A. (2014). Optimization of EDM Process Parameters Using Taguchi Method with Graphite Electrode. International Journal of Engineering Trends and Technology, 7(2), 48–51.
[11] Nagpal, P. (2016). Optimization and Analysis of Process Parameters on MRR in EDM of AISI D3 Die Steel Using SiC as Dielectric. International Journal of Emerging Trends in Science and Technology, 3(9), 4562-4570.
[12] Al-Shafaie, S.H., Talib, N. (2018). OptimizationofEDM Process Factorsfor MachiningAl-Si Alloy Using Response Surface Methodology, 26(10), 217-228.
[13] Papazoglou, E.l., Markopoulos, A.P., Manolakos, D.E. (2018). Experimental Research on EDM of AISI O1 Tool Steel and Study of the Surface White Layer Formation. Procedia Structural Integrity, 10, 235– 242.
[14] Prathipati, R.P., Devuri, V., Cheepu, M., Gudimetla, K., & Kiran, R. (2018). Machining of AISI D2 Tool Steel with Multiple Hole Electrodes by EDM Process. IOP Conference Series: Materials Science and Engineering, 330, 012067.
[15] Singh, B., Sasi, R., Subbu, S.K., Murlidharan, B. (2019). Electric Discharge Texturing of HSS Cutting Tool and Its Performance in Dry Machining of Aerospace Alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(3).
[16] Mahto, D.G., & Singh, N. (2017). Experimental Study of Process Parameters through Dissimilar Form of Electrodes in EDM Machining. SSRN Electronic Journal, 1-31.
[17] Straka, Ľ., & Hašová, S. (2018). Optimization of Material Removal Rate and Tool Wear Rate of Cu Electrode in Die-Sinking EDM of Tool Steel. The International Journal of Advanced Manufacturing Technology, 97(5-8), 2647–2654.
[18] Świercz, R., Oniszczuk-Swiercz, D., Chmielewski, T. (2019). Multi-Response Optimization of Electrical Discharge Machining Using the Desirability Function. Micromachines, 10(1), 72-75.
[19] Powder Tool Steels. (n.d.). Retrieved 2019, from ‘’https://www.doerrenberg.de/en/leistungen/edelstahl/downloads/datenblaetter.html?tx_c1x1downloads_pi1[ds_cat]=54&cHash=915e979b3b7a07eb2da84c02bc583362’’

Details

Primary Language

English

Subjects

Manufacturing and Industrial Engineering

Journal Section

Research Article

Authors

Serkan Yaman ^* This is me
Türkiye

Orhan Çakır This is me
Türkiye

Publication Date

June 1, 2020

Submission Date

April 13, 2020

Acceptance Date

-

Published in Issue

Year 2020 Volume: 1 Number: 2

IZ

https://izlik.org/JA76ZS62BF

Cite

RIS / Bibtex

APA

Yaman, S., & Çakır, O. (2020). Investigation of the Effects of EDM Parameters on Surface Roughness. Journal of Advances in Manufacturing Engineering, 1(2), 46-54. https://izlik.org/JA76ZS62BF

AMA

1.Yaman S, Çakır O. Investigation of the Effects of EDM Parameters on Surface Roughness. J Adv Manuf Eng. 2020;1(2):46-54. https://izlik.org/JA76ZS62BF

Chicago

Yaman, Serkan, and Orhan Çakır. 2020. “Investigation of the Effects of EDM Parameters on Surface Roughness”. Journal of Advances in Manufacturing Engineering 1 (2): 46-54. https://izlik.org/JA76ZS62BF.

EndNote

Yaman S, Çakır O (June 1, 2020) Investigation of the Effects of EDM Parameters on Surface Roughness. Journal of Advances in Manufacturing Engineering 1 2 46–54.

IEEE

[1]S. Yaman and O. Çakır, “Investigation of the Effects of EDM Parameters on Surface Roughness”, J Adv Manuf Eng, vol. 1, no. 2, pp. 46–54, June 2020, [Online]. Available: https://izlik.org/JA76ZS62BF

ISNAD

Yaman, Serkan - Çakır, Orhan. “Investigation of the Effects of EDM Parameters on Surface Roughness”. Journal of Advances in Manufacturing Engineering 1/2 (June 1, 2020): 46-54. https://izlik.org/JA76ZS62BF.

JAMA

1.Yaman S, Çakır O. Investigation of the Effects of EDM Parameters on Surface Roughness. J Adv Manuf Eng. 2020;1:46–54.

MLA

Yaman, Serkan, and Orhan Çakır. “Investigation of the Effects of EDM Parameters on Surface Roughness”. Journal of Advances in Manufacturing Engineering, vol. 1, no. 2, June 2020, pp. 46-54, https://izlik.org/JA76ZS62BF.

Vancouver

1.Serkan Yaman, Orhan Çakır. Investigation of the Effects of EDM Parameters on Surface Roughness. J Adv Manuf Eng [Internet]. 2020 Jun. 1;1(2):46-54. Available from: https://izlik.org/JA76ZS62BF