Volume: 1 Issue: 2, 6/1/20

Year: 2020

Research Articles

Research Article

3. Overview on Optimization Approaches for Resistance Spot Welding Parameters and Welded Joint Quality

 Journal of Advances in Manufacturing Engineering aims to publish novel,  original, theoretical, and applied research articles  in manufacturing engineering. 


Publishes original research and review articles on machining, metal forming, welding, casting, non-traditional manufacturing methods, plastic manufacturing, additive manufacturing, smart manufacturing, Industry 4.0 


Terms of Submission

Papers must be submitted on the understanding that they have not been published elsewhere and are not currently under consideration by another journal or any other publisher. The submitting author is responsible for ensuring that the article's publication has been approved by all the other coauthors. It is also the authors' responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability. All enquiries concerning the publication of accepted papers should be addressed to jame@yildiz.edu.tr.



Peer Review

All manuscripts are subject to peer review and are expected to meet standards of academic excellence. Submissions will be considered by an editor and “if not rejected right away” by peer-reviewers.

Title and Authorship Information

The following information should be included

Paper title
Full author names
Full institutional mailing addresses
Email addresses
Abstract

The manuscript should contain an abstract. The abstract should be self-contained and citation-free and should not exceed 200 words.



Introduction

This section should be succinct, with no subheadings.



Materials and Methods

This part should contain sufficient detail so that all procedures can be repeated. It can be divided into subsections if several methods are described.



Results and Discussion

This section may each be divided by subheadings or may be combined.



Conclusions

This should clearly explain the main conclusions of the work highlighting its importance and relevance.



Acknowledgments

All acknowledgments (if any) should be included at the very end of the paper before the references and may include supporting grants, presentations, and so forth.



References

Authors are responsible for ensuring that the information in each reference is complete and accurate. All references must be numbered consecutively and citations of references in text should be identified using numbers in square brackets (e.g., “as discussed by Smith [9]”; “as discussed elsewhere [9, 10]”). All references should be cited within the text; otherwise, these references will be automatically removed.

Reference format for articles:

Chen, C., Gao, M., Zeng, X. (2016) Relationship between temperature at cut front edge and kerf quality in fiber laser cutting of Al-Cu aluminum alloy, International Journal of Machine Tools and Manufacture, 109, 58-64.

Reference format for conference:

Akay, M., Tony, K. (2017) The effect of process parameters on the quality of metallic scaffolds 3rd International Symposium on Innovative Technologies in Engineering and Science, pp. 1200-1206, 3-5 June 2017, Valencia, Spain.

Reference format for book:

Singh, H. (2003) Fundamentals of Hydroforming, Society of Manufacturing Engineers,1st Ed., pages 50-63, United States of America.



Preparation of Figures

Upon submission of an article, authors are supposed to include all figures and tables in the PDF file of the manuscript. Figures and tables should not be submitted in separate files. If the article is accepted, authors will be asked to provide the source files of the figures. Each figure should be supplied in a separate electronic file. All figures should be cited in the paper in a consecutive order. Figures should be supplied in either vector art formats (Illustrator, EPS, WMF, FreeHand, CorelDraw, PowerPoint, Excel, etc.) or bitmap formats (Photoshop, TIFF, GIF, JPEG, etc.). Bitmap images should be of 300 dpi resolution at least unless the resolution is intentionally set to a lower level for scientific reasons. If a bitmap image has labels, the image and labels should be embedded in separate layers.



Preparation of Tables

Tables should be cited consecutively in the text. Every table must have a descriptive title and if numerical measurements are given, the units should be included in the column heading. Vertical rules should not be used.



Proofs

Corrected proofs must be returned to the publisher within 2-3 days of receipt. The publisher will do everything possible to ensure prompt publication. It will therefore be appreciated if the manuscripts and figures conform from the outset to the style of the journal.

Ethics & Policies


Open Access Policy


The Journal of Advances in Manufacturing Engineering supports the Budapest Open Access Initiative statement of principles that promotes free access to research literature. The declaration defines open access to academic literature as free availability on the internet, permitting users to read, record, copy, print, search, or link to the full text, examine them for indexing, use them as data for software or other lawful purposes without financial, legal, or technical barriers. Information sharing represents a public good, and is essential to the advancement of science. Therefore, articles published in this journal are available for use by researchers and other readers without permission from the author or the publisher provided that the author and the original source are cited. The articles in The Journal of Advances in Manufacturing Engineering are accessible through search engines, websites, blogs, and other digital platforms.

Additional details on the Budapest Open Access Initiative and their guidelines are available at https://www.budapestopenaccessinitiative.org/, including a Turkish translation of the recommendations at http://www.budapestopenaccessinitiative.org/boai-10-translations/turkish-translation.


Fee - Charges
This journal assesses NO submission fees, publication fees (article processing charges), or page charges.


Creative Commons License
A Creative Commons license is a public copyright license that enables the free distribution of copyrighted work. The Journal of Advances in Manufacturing Engineering articles are licensed under the Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC 4.0) version. The author grants the right to share and use original work with the condition that it be appropriately credited, it may not be used for commercial purposes, and secondary products must also be made available under the same terms of use. Specific details can be found at https://creativecommons.org/licenses/by-nc/4.0/.

The Journal of Advances in Manufacturing Engineering is committed to encouraging dissemination of academic work and interdisciplinary cooperation.

Ethics Policy
The observance of ethical principles throughout the research and publication process is fundamental to ensuring the integrity of the work and furthering the goal of contributing to and sharing high-quality, objective, reliable, and useful information.

The Journal of Advances in Manufacturing Engineering has adopted ethical principles based on the guidelines prepared by the Committee on Publication Ethics (COPE) (https://publicationethics.org/). We implement these processes to ensure appropriate support for our authors and their institutions, as well as our readers. It is crucial that all of the stakeholders in the process (authors, readers and researchers, publishers, reviewers, and editors) comply with ethical principles.

Ethical Responsibilities of the Authors
Studies submitted for publication must be original work of the author. References to other studies must be cited and/or quoted completely and accurately;
Only those who provide a substantial intellectual contribution to the content of the work may be cited as an author. Other contributors may be recognized with acknowledgements at the conclusion of the article;


All competing interests or relationships that may be perceived to constitute a conflict of interest must be declared and explained;
All studies involving human or animal subjects must comply with national and international laws and guidelines regarding privacy and ethical conduct (e.g., World Medical Association Declaration of Helsinki, US National Institutes of Health Policy on the Use of Laboratory Animals, EU Directive on the Use of Animals) and the details of approval and observance should be indicated in the Materials and Methods section of the manuscript;
Authors must be able to provide documentation showing that they have the right to use the data analyzed, all necessary permission related to the research, and appropriate consent;
Raw data and other material used in the article must be available and may be requested from the author(s) in order to verify the validity of the reporting;
In the event the author(s) notice an error at any point in the publication process or after publication, they have the obligation to inform the journal editor or publisher and cooperate in appropriate corrective action;
Authors may not submit their article for publication to more than one journal simultaneously. Each application must be initiated following the completion of any previous effort. Previously published articles, will not be accepted, including translations, without the proper acknowledgement of the original author;
Changes in authorship designation (such as adding authors, changing the printed order of the authors, removing an author) once the evaluation process has begun will not be accepted in order to protect all parties involved.


Ethical Duties and Responsibilities of the Editors
The editor is responsible for everything published in the journal. In the context of this responsibility, editors have the following duties and obligations:
Endeavor to meet the needs of readers and authors;
Maintain continuous development to improve the journal;
Consistently work to ensure quality and academic integrity. The editor is responsible for confirming that the publishing policies and standards are upheld;

Support freedom of thought;
Prevent business needs or other considerations from compromising intellectual and ethical standards, including acting in a balanced, objective, and fair manner in the course of their duties without any discrimination based on gender, religious or political beliefs, ethnic or geographical origin, sponsorship, renown, or other influence;
Apply the publicly defined publication policies created and enforced to ensure a timely and impartial evaluation process for all submissions;
Protect intellectual property and to defend the rights of the journal and author(s);
Demonstrate clarity and transparency. The editor is expected to ensure that any errors, inconsistencies, or misleading statements are corrected quickly and appropriately acknowledged;
Perform a thorough, timely, and objective investigation of any complaint or allegation of misconduct, including providing the opportunity for the author to present information refuting accusations, and to share the findings and conclusions and implement appropriate action, which may include, but is not limited to rejection of an article.

Reader Relationship
The editor is to make publication decisions based on expectations of suitable and desirable material. Studies accepted for publication must be original contributions that benefit the reader, researcher, practitioner, and the literature. In addition, editors are obliged to take into account feedback from readers, researchers, and practitioners, and to provide an informative response. Readers will also be informed of any funding provided to support published research.

Author Relationship

The decision to accept an article is to be based on the importance, original value, validity, and clarity of expression of the work, and the goals and objectives of the journal;
Studies accepted for evaluation and publication will not be withdrawn unless serious problems are identified;
The editor will not disregard positive reviewer comments unless there is a serious problem with the study;
New editors will not change publishing decisions made by previous editor(s) unless there is a serious problem;
A description of the submission and evaluation process is publicly available;
Authors are provided with descriptive and informative feedback.

Reviewer Relationship
Reviewers are to be selected according to the subject of the study;
Information and guidance for the evaluation phase is provided;
Any conflicts of interest between authors and reviewers will be disclosed and managed appropriately;
Reviewer identity is to be kept confidential to preserve a blind review process;
Reviewers are to evaluate the study using unbiased, scientific, and constructive comments. Unkind or unscientific commentary will not be permitted;
Reviewers will be evaluated using criteria such as timely response and quality of observations;
The pool of reviewers is to be assessed and supplemented regularly to ensure a broad scope of expertise.

Editorial Board Relationship
The editor works with the members of the editorial board to ensure that they are familiar with journal policies and developments in regular meetings and announcements, and will provide training for new members and assistance to board members during their tenure in their role as a supporter of the journal.

Editorial board members must be qualified and able to contribute to the journal;
Members of the editorial board must evaluate studies impartially and independently;
Editorial board members with the appropriate expertise will be given the opportunity to evaluate suitable articles;
The editor will maintain regular contact with the editorial board and hold regular meetings regarding the development of editorial policies and other aspects of journal management.
Creativity and Openness

Constructive criticism is to be encouraged;
Authors will be given the opportunity to reply to criticism or lodge complaints;
Negative results will not be a reason for submission denial.
Ethical Responsibilities of the Reviewers
Peer review of research embodies the scientific method, subjecting the work to the exacting scrutiny of knowledgeable colleagues. The rigor of the review process directly affects the quality of the literature; it provides confidence in an objective and independent evaluation of the published work. The Journal of Advances in Manufacturing Engineering uses a double-blind review process. All comments and the evaluation are transmitted through the journal management system. Reviewers should:
Only agree to evaluate studies related to their specialty;
Return reviews promptly and within the designated timeframe;
Evaluate with impartiality. Nationality, gender, religious beliefs, political beliefs, commercial concerns, or other considerations must not influence the evaluation;
Refuse to review any work with a potential conflict of interest and inform the journal editor;
Maintain confidentiality of all information. Destroy manuscripts and related material following the review. Only the final published version may be used for any purpose;
Report any suspicion of misconduct to the editor;
Use thoughtful and constructive language intended to improve the quality of the article. Hostile or derogatory comments are not acceptable.


Ethical Responsibilities of the Publisher
The role of the publisher includes stewardship of the scholarly record. As such, the publisher should:
Abide by ethical principles related to research integrity; the process of application, review, and selection; and publication;
Collaborate with the editor and the editorial board to maintain and develop the journal in a relationship that recognizes editorial independence and is defined by written agreement;
Publish content in a timely manner, including corrections, clarifications, and retractions;
Preserve published work.
The publication processes of the journal are conducted in accordance with the guidelines of International Committee of Medical Journal Editors (ICMJE), the World Association of Medical Editors (WAME), the Council of Science Editors (CSE), the Committee of Publication Ethics (COPE), the European Association of Science Editors (EASE) and National Information Standards Organization (NISO).

Examples of some activities considered to be contrary to scientific research and publication ethics:

Plagiarism: The representation of the ideas, methods, data, or other work of another, in whole or in part, as one’s own. The original source must be appropriately acknowledged. Authors are encouraged to offer unique work that does not rely on substantial use of other sources, regardless of citation.
Fraud: The use of fabricated or falsified data or other deceptive misrepresentation of fact.
Distortion: Manipulation of the research records, data, images, or results, or presenting unused devices or materials as if they were used in the research, particularly in the interests of study sponsors.
Republication: Duplicate submissions presented as unique publications.
Slicing: The use of a portion of data or findings derived from a single research idea in multiple smaller units as separate publications.
Inaccurate authorship: The inclusion of individuals as named authors who were not active contributors, the failure to include contributors, or the inappropriate ranking of authors.
Lack of acknowledgement of individuals, institutions, or organizations that provided financial or other substantial support to the work.
Use of a thesis or unpublished study without the permission of the owner.
Failure to comply with ethical rules for human and animal research, including respect for patient rights and animal welfare, or obtaining the required approval.
The misuse of resources, facilities, or devices provided for scientific research.
The use of false or misleading statements.
On rare occasions it may be necessary for a journal to impose sanctions on researchers who have engaged in questionable research practices or publishing ethics malpractice: for example, a ban against publishing any further articles in the journal when doing so puts the journal’s reputation demonstrably at risk, or not permitting a researcher to serve as a reviewer or editor. Bans of this nature may be implemented for a period of time and revoked or extended if necessary, upon review at the conclusion of the allotted time period. Sanctions may be appealed by writing to the journal editor.

Plagiarism Policy
Plagiarism is the theft of another’s work and a violation of ethics, regardless of whether it is intentional or not. It is unacceptable conduct to submit or publish manuscripts using other sources without appropriately citing the reference. It is the policy of the Journal of Advances in Manufacturing Engineering, to use plagiarism detection software for all submissions and to perform an editorial review when necessary. The editor or the editorial board may request revision or reject a manuscript that does not meet publication standards, including plagiarism, citation or other manipulation, or any fraudulent misrepresentation.

Copyright Transfer
Manuscripts submitted for publication in the Journal of Advances in Manufacturing Engineering should be original, unpublished work. Upon submission, the authors are obliged to declare that the study, in whole or in part, has not been previously published or evaluated for publication on any other platform. Sanctions may be applied for failure to observe this policy.

Authors agree to transfer copyright privileges upon submission to the Journal of Advances in Manufacturing Engineering. This transfer takes effect upon acceptance for publication. No part of published material may be used for any other purpose without the written permission of the publisher.

Authors should obtain any necessary permission from the copyright holder when using content previously published in printed or electronic format, including pictures, tables, or other elements. The legal, financial, and criminal responsibility resides with the author.
Authors must return a completed copyright transfer form upon submission.

Conflict of Interest
The editor is required to ensure that any conflicts of interest between authors, reviewers, or other parties are disclosed and managed appropriately to provide an independent and impartial process.
Any potential perception of a financial or personal interest that may affect decision-making creates a conflict of interest. The presence of a conflict of interest is independent of the occurrence of inappropriateness. The reliability of the scientific process and published articles is directly related to the objective consideration of conflicts of interest during the planning, implementation, writing, evaluation, editing, and publication of scientific studies.
Financial relationships are the most easily identified conflicts of interest, and if undisclosed, they undermine the credibility of the journal, the authors, and the science. However, conflicts can also occur through individual relationships, academic competition, intellectual approach, and more. Authors should refrain as much as possible from any relationship that could restrict their ability to objectively access data or analyze, interpret, prepare, and publish their article. Authors must disclose any relationships related to study submissions.
Editors and peer reviewers should also be aware of potential conflicts of interest and refrain from engaging in any activity that could be questionable and report associations that could be perceived as presenting a conflict.
The publication team works diligently to ensure that the evaluation process is conducted in an impartial manner in order to protect the interests of all parties.
The conflict of interest form and more detailed information are available at: http://www.icmje.org/disclosure-of-interest/

This journal assesses NO submission fees, publication fees (article processing charges), or page charges.