Hyperbaric Pressure Effect on Dental Luting Cements

Year 2023, Volume: 7 Issue: 1, 464 - 470, 31.01.2023

Secil Ozkan Ata Nazım Ata Rıfat Ugurlutan

https://doi.org/10.30621/jbachs.1187298

Abstract

Background and Purpose: The aim of this study was to evaluate the flexural strength values of five luting cements that are commonly used in dental restorations after exposed to hyperbaric pressure.
Methods: Five luting cements (polycarboxylate cement, glass ionomer luting cement, manual-mixed resin cement, and two auto-mixed resin cement) were prepared. (25 x 2 x 2 mm3) (n=16 for each) The specimens were divided into two subgroups (n=8) and were exposed to hyperbaric pressure (3 ATM) 20 times for 30 minutes. The control groups stored in ambient pressure. Universal testing machine was used for flexural strength measurement with a crosshead speed of 1 mm/min.
Results: One-way ANOVA test was used for statistical analysis, the differences in flexural strength values were additionally evaluated by Weibull Analysis. Glass ionomer and polycarboxylate cement were the most effected resins from hyperbaric pressure changes. Regardless of the pressure changes, the highest flexural strength values were seen for the self-adhesive resin cements and polycarboxylate cement showed the lowest strength value.
Conclusion: Resin cements can be used for cementation of the dental restorations in divers and individuals who are subjected to hyperbaric pressure.

Keywords

Prosthetic dentistry, self-adhesive resin cement, luting cement, flexural strength, hyperbaric medicine.

References

• 1. Zadik Y, Drucker S. Diving dentistry: a review of the dental implications of scuba diving. Aust Dent J 2011;56(3):265-271.
• 2. Sadighpour L, Geramipanah F, Fazel A, Allahdadi M, Kharazifard MJ. Effect of Selected Luting Agents on the Retention of CAD/CAM Zirconia Crowns Under Cyclic Environmental Pressure. J Dent (Tehran) 2018;15(2):97-105.
• 3. Lyons KM, Rodda JC, Hood JA. The effect of environmental pressure changes during diving on the retentive strength of different luting agents for full cast crowns. J Prosthet Dent 1997;78(5):522-527.
• 4. Ata SO, Akay C, Mumcu E, Ata N. Influence of atmospheric pressure changes on dentin bond strength of conventional, bulk-fill and single-shade resin composites. Diving Hyperb Med 2022;52(3):175-182.
• 5. Ozkan Ata, S., Akay, C., Mumcu, E. and Ata, N. (2022), "Adhesion of auto-mixed and manual-mixed self-adhesive resin cements to dentin on exposure to long-term high-altitude pressure", Aircraft Engineering and Aerospace Technology, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/AEAT-03-2022-0069.
• 6. Ozkan Ata S, Akay C, Ata N. Evaluation of bond strength of polyether ether ketone (PEEK) to composite resin on hypobaric and hyperbaric conditions. International Journal of Polymeric Materials and Polymeric Biomaterials, 2022; 71:7, 540-547.
• 7. Shafigh E, Fekrazad R, Beglou AR. Impact of various pressures on fracture resistance and microleakage of amalgam and composite restorations. Diving Hyperb Med 2018;48(3):168-172.
• 8. Kielbassa AM, Müller JAG. Hypobaric Conditions and Retention of Dental Crowns Luted with Manually or Automixed Dental Cements. Aerosp Med Hum Perform 2018;89(5):446-452.
• 9. Geramipanah F, Sadighpour L, Assadollahi R. The effect of environmental pressure and resin cements on the push-out bond strength of a quartz fiber post to teeth root canals. Undersea Hyperb Med 2016;43(2):143-150.
• 10. Gulve MN, Gulve ND, Shinde R, Kolhe SJ. The effect of environmental pressure changes on the retentive strength of cements for orthodontic bands. Diving Hyperb Med 2012;42(2):78-81.
• 11. Vargas MA, Bergeron C, Diaz-Arnold A. Cementing all-ceramic restorations: recommendations for success. J Am Dent Assoc 2011;142 Suppl 2:20S-4S.
• 12. Nicholson JW. Adhesion of glass-ionomer cements to teeth: a review. Int J Adhes Adhes 2016;69:33–8.
• 13. Klai S, Altenburger M, Spitzmüller B, Anderson A, Hellwig E, Al-Ahmad A. Antimicrobial effects of dental luting glass ionomer cements on Streptococcus mutans. ScientificWorldJournal 2014; 2014:807086.
• 14. Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 2005;93:551-558.
• 15. Faria-E-Silva AL, Pfeifer SC. Effectiveness of high-power LEDs to polymerize resin cements through ceramics: an in vitro study. J Prosthet Dent 2017;118:631-636.
• 16. Van Zeghbroeck L, Davidson CL, De Clercq M. Cohesive failure due to contraction stress in glass ionomer luting cements. J Dent Res 1989;68:1014.
• 17. Davidson CL, Van Zeghbroeck L, Feilzer AJ. Destructive stresses in adhesive luting cements J Dent Res 1991;70:880-882.
• 18. Neves AB, Lopes LIG, Bergstrom TG, da Silva ASS, Lopes RT, Neves AA. Porosity and pore size distribution in high-viscosity and conventional glass ionomer cements: a micro-computed tomography study. Restor Dent Endod 2021;46(4):e57.
• 19. Benetti AR, Jacobsen J, Lehnhoff B, et al. How mobile are protons in the structure of dental glass ionomer cements? Sci Rep 2015;5:8972.
• 20. Ozkan Ata S, Akay C, Ata N. Evaluation of bond strength of polyether ether ketone (PEEK) to composite resin on hypobaric and hyperbaric conditions, International Journal of Polymeric Materials and Polymeric Biomaterials 2022;71(7):540-547.
• 21. Ferracan JL, Stansbury JW, Burke FJT. Self-adhesive resin cements-chemistry, properties and clinical considerations. J Oral Rehabil 2011; 38: 295-314.
• 22. Sunico-Segarra M, Segarra A. A Practical Clinical Guide to Resin Cements. Berlin Heidelberg: Springer 2015:17.
• 23. Cassina G, Fischer J, Rohr N. Correlation between flexural and indirect tensile strength of resin composite cements. Head Face Med 2016;12(1):29.
• 24. Nomoto R, Komoriyama M, McCabe JF, Hirano S. Effect of mixing method on the porosity of encapsulated glass ionomer cement. Dent Mater 2004;20:972-978.
• 25. Mitchell CA, Douglas WH. Comparison of the porosity of hand-mixed and capsulated glass-ionomer luting cements. Biomaterials 1997;18:1127-1131.
• 26. Mitra SB, Kedrowski BL: Long-term mechanical properties of glass ionomers. Dent Mater 1994; 10: 78–82.
• 27. Xie D, Brantley WA, Culbertson BM, Wang G. Mechanical properties and microstructures of glass-ionomer cements. Dent Mater 2000;16(2):129-138.
• 28. Furuichi T, Takamizawa T, Tsujimoto A, Miyazaki M, Barkmeier WW, Latta MA. Mechanical Properties and Sliding-impact Wear Resistance of Self-adhesive Resin Cements. Oper Dent 2016;41(3):E83-E92.
• 29. Oguri M, Yoshida Y, Yoshihara K et al. Effects of functional monomers and photo-initiators on the degree of conversion of a dental adhesive. Acta Biomater 2012;8:1928–34.
• 30. Robichaud R, McNally ME. Barodontalgia as a differential diagnosis symptoms and findings. J Can Dent Assoc 2005;71: 39-42.
• 31. Chung SM, Yap AU, Chandra SP, Lim CT. Flexural strength of dental composite restoratives: comparison of biaxial and three-point bending test. J Biomed Mater Res B 2004;71:278-283.
• 32. Duymus ZY, Yanikoglu ND, Alkurt M. Evaluation of the flexural strength of dual-cure composite resin cements. J Biomed Mater Res B 2013;101:878-881.