Abstract
In this study, Reclaimed Asphalt Pavement
(RAP) were used in Hot Mix Asphalt (HMA) samples, stability and flow resistance
and Indirect Tensile Strength Test (IDT) of HMA samples were investigated.
Initially, optimum bitumen content of wearing course was determined by Marshall
Stability test method and then RAP, 5 to 50 % in terms of total asphalt
concrete samples weight was added to HMA
samples at the predefined optimum bitumen content. Besides, control samples
were performed and compared with the RAP added samples. Test results show that
Reclaimed Asphalt Pavement (RAP) can be used in wearing course as an additive
in accordance with Turkey General Directorate of Highways (GDH) specification
limits. This paper demonstrates that the asphalt mixtures containing RAP
performed at least like, or better than, that of conventional asphalt
materials.
Keywords
Reclaimed Asphalt Pavement (RAP) Stability flow resistance Indirect Tensile Test Impaired asphalt pavement material
References
- Widyatmoko I. Mechanistic-empirical mixture design for hot mix asphalt pavement recycling. Construct Build Mater 2006. oi:10.1016/j.conbuidmat. 2006.05.041.
- Brown ER, Cross S. A study of in-place rutting of asphalt pavements. J Assoc Asphalt Paving Technol 1989;58:1–39.
- Aravind K, Animesh D. Pavement design with central plant hot-mix recycled asphalt mixes. Construct Build Mater 2007;21(5):928–36.
- Shoenberger JE, Voller TW. Hot in-Place Recycling of Asphalt Pavements Technical Report GL-90-22. U.S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, Miss., 1990.
- Kandhal PS, Rao SS, Watson DE, Young B. Performance of recycled hot mix asphalt mixtures in State of Georgia. National Center for Asphalt Technology, NCAT Report 95-01; 1995.
- Li X, Marasteanu M, Williams R, Clyne T. Effect of RAP (proportion and type) and binder grade on the properties of asphalt mixtures. Transport Res Rec: J Transport Res Board 2008;2051:90–7.
- Appea AK, Rorrer T, Clark T. Case studies on processes involved in the production and placement of high RAP asphalt concrete mixes in 2007 on selected routes in Virginia. In: Transportation research board 88th annual meeting. CD-ROM. Washington, DC; 2009.
- Maupin Jr. GW, Diefenderfer S, Gillespie J. Performance and economic evaluation of Virginia’s higher RAP specification. In: Transportation research board 88th annual meeting. CD-ROM. Washington, DC; 2009.
- Department of Transport. specification for highway works and notes for guidance on the specification for highway works. manual of contract documents for highway works. The Stationery Office, London, vols. 1 and 2.
- McDaniel R, Nantung T. Designing superpave mixes with locally reclaimed asphalt pavement. TR News 239, July–August 2005.
- REAM-SP 1 (2005): Specification for cold inplace recycling. Road Engineering Association of Malaysia.
- McDaniel,R., and Shah, A.(2003) Use of reclaimed asphalt pavement (rap) under superpave specifications, Journal of the Association.
- ASTM D6926: 10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus.
- ASTM D6931 – 07 (2007) Standard test method for indirect tensile (IDT) strength of bituminous mixtures. American Society for Testing and Materials.
- U.S. Department of Transportation , Federal Highway Administration ̎ASPHALT RECYCLING AND RECLAIMING ASSOCIATION ̎ USA 2001, ARRA.
Abstract
Bu çalışmada Bitümlü Sıcak Karışım (BSK)
numunelerinin içerisine çeşitli oranlarda kazanılmış asfalt betonu malzemesi
(RAP) ilave edilerek, Stabilite, Akma ve İndirket Çekme (ITS) dayanımları
incelenmiştir. Öncelikle aşınma tabakası için optimum bitüm miktarı Marshall
metodu ile bulunmuş ve daha sonra optimum bitüm içeriğinde hazırlanan asfalt
betonu numunelerine %5 ila %50 oranlarında RAP ilave edilmiştir. Bunun yanında
RAP ilave edilmemiş asfalt betonu numuneler de teste tabii tutulmuş ve sonuçlar
karşılaştırılmıştır. Test sonuçları RAP ilave edilmiş BSK numunelerinin
stabilite ve akma ve İndirket Çekme Deneyi (ITS) yönünden Karayolları Teknik
Şartnamesindeki limitler içerisinde Aşınma tabakasında kullanılabileceğini
göstermiştir.
Keywords
Geri kazanılmış asfalt betonu malzemesi Stabilite Akma dayanımları İndirket Çekme Deneyi Bozulmuş asfalt kaplama malzemesi
References
- Widyatmoko I. Mechanistic-empirical mixture design for hot mix asphalt pavement recycling. Construct Build Mater 2006. oi:10.1016/j.conbuidmat. 2006.05.041.
- Brown ER, Cross S. A study of in-place rutting of asphalt pavements. J Assoc Asphalt Paving Technol 1989;58:1–39.
- Aravind K, Animesh D. Pavement design with central plant hot-mix recycled asphalt mixes. Construct Build Mater 2007;21(5):928–36.
- Shoenberger JE, Voller TW. Hot in-Place Recycling of Asphalt Pavements Technical Report GL-90-22. U.S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, Miss., 1990.
- Kandhal PS, Rao SS, Watson DE, Young B. Performance of recycled hot mix asphalt mixtures in State of Georgia. National Center for Asphalt Technology, NCAT Report 95-01; 1995.
- Li X, Marasteanu M, Williams R, Clyne T. Effect of RAP (proportion and type) and binder grade on the properties of asphalt mixtures. Transport Res Rec: J Transport Res Board 2008;2051:90–7.
- Appea AK, Rorrer T, Clark T. Case studies on processes involved in the production and placement of high RAP asphalt concrete mixes in 2007 on selected routes in Virginia. In: Transportation research board 88th annual meeting. CD-ROM. Washington, DC; 2009.
- Maupin Jr. GW, Diefenderfer S, Gillespie J. Performance and economic evaluation of Virginia’s higher RAP specification. In: Transportation research board 88th annual meeting. CD-ROM. Washington, DC; 2009.
- Department of Transport. specification for highway works and notes for guidance on the specification for highway works. manual of contract documents for highway works. The Stationery Office, London, vols. 1 and 2.
- McDaniel R, Nantung T. Designing superpave mixes with locally reclaimed asphalt pavement. TR News 239, July–August 2005.
- REAM-SP 1 (2005): Specification for cold inplace recycling. Road Engineering Association of Malaysia.
- McDaniel,R., and Shah, A.(2003) Use of reclaimed asphalt pavement (rap) under superpave specifications, Journal of the Association.
- ASTM D6926: 10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus.
- ASTM D6931 – 07 (2007) Standard test method for indirect tensile (IDT) strength of bituminous mixtures. American Society for Testing and Materials.
- U.S. Department of Transportation , Federal Highway Administration ̎ASPHALT RECYCLING AND RECLAIMING ASSOCIATION ̎ USA 2001, ARRA.
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Research Articles |
| Authors | |
| Publication Date | March 30, 2018 |
| Submission Date | May 11, 2017 |
| Acceptance Date | March 23, 2018 |
| Published in Issue | Year 2018 |