AYRIŞTIRMALI YÜKSELTİCİ TİP GÜÇ DÖNÜŞTÜRÜCÜSÜ İÇİN GERÇEK ZAMANLI MİKRODENETLEYİCİLİ KONTROLCÜ TASARIMI

Abstract

Devre ve kullanılan elemanların boyutlarını küçültmek, çıkış gerilimi dalgalılık ve darbe genlik modülasyonu doluluk oranını azaltmak için literatürde paralel yapıdaki yükseltici tip güç dönüştürücüsü önerilmiştir. Bu yapının yüklü ve yüksüz durumda kararlı çıkış sağlayabilmesi için çeşitli kontrol metotları uygulanmış ve performansları deneysel ortamda karşılaştırılmıştır. Tasarlanan sistem, integral, oransal-integral, bulanık mantık kontrol metotlarının uygulandığı gerçek zamanlı mikro denetleyici temelli bir geri besleme yapısı içermektedir. Elde edilen sonuçlara göre bulanık mantık denetleyicili sistemin tepki süresi diğer yöntemlere göre daha düşük olduğundan dolayı güç verilen sistem için daha kararlı bir güç kaynağı olmaktadır.  

Keywords

• Oransal İntegral Kontrol,Bulanık Mantık,Güç Dönüştürücü,Ayrıştırmalı Yükseltici

DESIGN OF A REAL-TIME MICROCONTROLLER FOR INTERLEAVED BOOST CONVERTER

Abstract

Interleaved boost converters proposed in the literature for reduce the size of the circuit and the amount of components, and to decrease the output voltage ripple and pulse width modulation duty cycle. In order to obtain a stable voltage at the output of interleaved boost converters, various control methods have been applied and the performances have been compared in the experimental environment. The proposed system consists of a real-time microcontroller-based feedback structure in which integral, proportional-integral, fuzzy logic control methods are applied. According to the results, the response time of the fuzzy logic controller system is lower than other control methods, so it becomes a more stable power source for the energized system.

Keywords

• Proportional-Integral Control,Fuzzy Logic,Power Converter,Interleaved Boost,Real Time System

References

1. Alkrunz, M., Yazıcı, I., 2016. Design of discrete time controllers for the DC-DC boost converter, SAÜ Fen Bil Der, 20(1), 75-82.
2. Åström, K.J., Hägglund, T., 2001. The future of PID control, Control Engineering Practice, 9(11), 1163-1175.
3. Azadean, A., Porobic, L., Ghazinoory, S., Samouei, P., Kheirkhah, A.S., 2011. Fuzzy logic in manufacturing: A review of literature and a specialized application”. International Journal of Production Economics, 258–270.
4. Boscaino, V., Ferraro, V., Miceli, R., Capponi, G., Proietto, R., 2013. A multi-input single-inductor power system for multisource energy harvesting, Renewable Energy Research and Applications (ICRERA) International Conference, 252-257.
5. Dela, A.H.V., Navarro, N.A.J., Roque, C.J.E., Villano, A.P.R., Cruz, A.R., Guevarra, E.C., Roxas, E.A., Vicerra, R.R.P., 2015. Fuzzy logic based replenishment system for smart paper dispensing machine, Humanoid Nanotechnology Information Technology Communication and Control Environment and Management, 1-7.
6. Dinca, L., Corcau, J.I., 2016. P.I. versus fuzzy control for a DC to DC boost converter, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 803-808.
7. Fard, M., Aldeen, M., 2016. Robust control design of a DC micro gird comprising photovoltaic and battery systems, Power and Energy Engineering Conference IEEE PES Asia-Pacific, 329-336.
8. Hasaneen, B.M., Mohammed, A.A.E., 2008. Design and simulation of DC/DC Boost Converter, Power System Conference, 2008. MEPCON 2008. 12th International Middle-East, 335-340.

9. Karthikumar, S., Mahendran, N., Sriraman, S., 2012. Design of Fuzzy logic controller for output voltage ripple (OVR) reduction of KY boost converter, Emerging Trends in Electrical Engineering and Energy Management (ICETEEEM) International Conference, 181-185.
10. Katic, J.,Rodriguez, S., Rusu, A., 2014. Analysis of dead time losses in energy harvesting boost converters for implantable biosensors, NORCHIP, 1-4.
11. Liu, J., Gao, D., Wang, Y., 2015. High Power High Voltage Gain Interleaved DC-DC Boost Converter Application, Power Electronics Systems and Applications 6th International Conference, 1-6.
12. Lu, S., Mu, M., Jiao, Y., Lee, F.C., Zhao, Z., 2014. Coupled inductors in interleaved multiphase three-level DC-DC converter for high power energy storage applications, Transportation Electrification Asia-Pacific (ITEC Asia-Pacific) IEEE Conference and Expo, 1-6.
13. Mao, P., Jia, H., Wang, C.Y., Xu, M., 2013. Boost-Buck power factor correction converter with integrated different current control methods, ECCE Asia Downunder IEEE, 826-828.
14. Nhivekar, G.S., Nirmale. S., Mudholker, R.R., 2011. Implementation of fuzzy logic control algorithm in embedded microcomputers for dedicated application, International Journal of Engineering, Science and Technology, 3(4), 276-283.
15. Parveen, N., Rupesh, K.C., 2016. Design and simulation of interleaved DC-DC boost converter for three-phase loads using solar panel, Computation of Power Energy Information and Communication International Conf, 514-519.
16. Pellano, K., Lin, J.C., 2014. Design and Implementation of a Microcontroller Based Interleaved DC-DC Boost Converter for Fuel Cell Electric Vehicles, Next-Generation Electronics International Symposium, 978(1), 4799-4780.
17. Ren, H.P., Guo, X., Zi, Y.C., Li, J., 2015. Double loop control of boost converter based current switching controller and voltage compensator, 7th International Conf on Electronics, Computers and Artificial Intelligence (ECAI), 11-16.
18. Segura, F., Andujar, J.M., Duran, E., 2011. Analog Current Control Techniques for Power Control in PEM Fuel-Cell Hybrid Systems: A Critical Review and a Practical Application, Industrial Electronics IEEE Transactions, 58, 1171-1184.
19. Wong, B.K., Vincent, S.L., 2011. A survey of the application of fuzzy set theory in production and operations management, International Journal of Production Economics, 129(1), 157–168.
20. Yazıcı, İ., Özdemir, A., Erdem, Z., 2000. Real time implementation of a digital controlled boost converter". International Conference on Electrical and Electronics Engineering - ELECO, 437-441.
21. Zadeh, L.A. (1965) Fuzzy sets, Information and Control, 8(3), 338-353.