Research Article
BibTex RIS Cite

INVESTIGATION OF THE EFFECT OF ADDING A STIRRER AND STIRRER LOCATION ON ELECTRIC FIELD UNIFORMITY INTO REVERBERATION CHAMBER

Year 2019, Volume: 7 Issue: 1, 115 - 125, 25.03.2019
https://doi.org/10.21923/jesd.464439

Abstract

Reverberation chambers are
new and effective test environments used in recent years for electromagnetic
compatibility testing because of their relatively cheap realization. These chambers
are seen as an alternative to fully non-reflective testing environments in the
Pre-Compatibility testing stages (due to the high approximation of the result).
Reverberation chamber testing environments have a much
cheaper installation cost than the full-reflective rooms despite the size of
their working volumes. In this study, a reverberation chamber with real
dimensions is designed with the help of electromagnetic simulation program. The
effect of the stirrer and the stirrer location in the room was investigated by
adding the stirrer to this reverberation chamber. According to the observed
results, the effect of the addition of stirrer in the room over the standard
deviation of the electric fields, ie the electric field uniformity, is averagely
1 dB. In addition, although the stirrer location in the room had little effect
on the electric field uniformity, It has been observed that the determination
of the stirrer location has a significant effect to obtain the limits proposed
by the International Electrotechnical Commission standard (IEC 61000-4-21).

References

  • Başyiğit İ.B., Doğan H., Helhel S., "Simulation of metallic enclosures with apertures on Electrical Shielding Effectiveness", ELECO 2017 10th International Conference on Electrical and Electronics Engineering, BURSA, TÜRKIYE, 30 Kasım - 2 Aralık 2017, vol.1, no.1, pp.1082-1084
  • Basyigit, Ibrahim Bahadir; Genc, Abdullah; Helhel, Selcuk, Electrical Shielding Effectiveness of Metallic Enclosures; Effect of Source Orientation and Aperture Dimension, Conference: Progress in Electromagnetics Research Symposium - Spring (PIERS) Location: St Petersburg, RUSSIA Date: MAY 22-25, 2017
  • Besnier, P., Démoulin, B., 2011, Electromagnetic Reverberation Chambers. 10.1002/9781118602034.ch3.
  • B. Zhang, W. Li, X. Li, Z. Yuan, J. He and R. Zeng, "Field Uniformity Investigation of Reverberation Chamber at Calibration Stage," 2009 20th International Zurich Symposium on Electromagnetic Compatibility, Zurich, 2009, pp. 45-48. doi: 10.1109/EMCZUR.2009.4783386
  • C. Bruns and R. Vahldieck, “A Closer Look at Reverberation Chambers - 3-D Simulation and Experimental Verification”. IEEE Transactions on Electromagnetic Compatibility., vol.47, no.3, pp.612-616, Oct. 2005.
  • Hemming, L.H., Electromagnetic Anechoic Chambers: A Fundamental Design and Specification Guide [Book Review]. Instrumentation & Measurement Magazine, IEEE. 2003 6. 67- 67. 10.1109/MIM.2003.1184319.
  • Hong, J., Huh, C., 2010, Optimization of stirrer with various parameters in reverberation chamber. Progress in Electromagnetics Research-pier - PROG ELECTROMAGN RES. 104. 15-30. 10.2528/PIER09121610.
  • Huang, Y., et al. “Comparison of Two Stirrer Designs for a New Reverberation Chamber.” The 2006 4th Asia-Pacific Conference on Environmental Electromagnetics(2006): 450-453.
  • IEC 61000-4-21:2003, Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation Chamber Test Methods[S].J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68–73.
  • Lovat, Giampiero. (2007). Electromagnetic Shielding.
  • Lundén, O., Wellander, N., Bäckström, M., 2010, Stirrer Blade Separation Experiment in Reverberation Chambers. 526 - 529. 10.1109/ISEMC.2010.5711331.
  • Nisanci, M., E. Kucuksille, Y. Cengiz, A. Orlandi, and A. Duffy, "The prediction of the electric field level in the reverberation chamber depending on position of stirrer," Expert Systems with Applications, Vol. 38, No. 3, 1689-1696, 2011.
  • Urul, B., Helhel, S., Basyigit, I., Göksu, T., 2017, CST Simulation of Reverberation Chamber for Improved Field Uniformity.
  • Wellander, N., Lundén, O., Bäckström, M., 2007, Experimental Investigation and Mathematical Modeling of Design Parameters for Efficient Stirrers in Mode-Stirred Reverberation Chambers. Electromagnetic Compatibility, IEEE Transactions on. 49. 94 - 103. 10.1109/TEMC.2006.888166.
  • Weston, David., Electromagnetic Compatibility: Principles and Applications / D.A. Weston.. Materials & Design.1992., 13. 10.1016/0261-3069(92)90250-L.
  • Yardım, F.E., Akcam, N., vd., "Shielding Effect Analysis of Various Configurations of the Square Patch Elements", GU J Sci, 30(2): 123-132, (2017).

YANSIMALI ODA İÇERİSİNE BİR KARIŞTIRICI EKLENMESİNİN VE KARIŞTIRICI KONUMUNUN ELEKTRİK ALAN DÜZGÜNLÜĞÜNE ETKİSİNİN İNCELENMESİ

Year 2019, Volume: 7 Issue: 1, 115 - 125, 25.03.2019
https://doi.org/10.21923/jesd.464439

Abstract

Yansımalı odalar görece
çok ucuza gerçeklenebilmeleri nedeni ile son yıllarda elektromanyetik uyumluluk
testleri için kullanılan yeni ve etkili bir test ortamıdır. Ön uyumluluk test
aşamalarında (sonuca ilişkin yüksek yaklaşıklıkta cevap vermeleri nedeni ile) tam
yansımasız test ortamları için bir alternatif olarak görülmektedir. Yansımalı
oda test ortamları, çalışma hacimlerinin büyüklüğüne rağmen tam yansımasız odalara
göre çok daha ucuz kurulum maliyetine sahiptir. Bu çalışmada, elektromanyetik benzetim
programı yardımıyla gerçek boyutlarda bir yansımalı oda tasarlanmıştır. Daha
sonra tasarlanan bu yansımalı oda içerisine karıştırıcı eklenerek bu
karıştırıcının ve karıştırıcının oda içerisindeki konumunun alan düzgünlüğüne
olan etkisi incelenmiştir. Gözlemlenen sonuçlara göre oda içerisine karıştırıcı
eklenmesinin elektrik alanların standart sapmasına yani elektrik alan düzgünlüğüne
olan etkisi ortalama 1 dB’dir. Bunun yanında oda içerisindeki karıştırıcı
konumun elektrik alan düzgünlüğüne oldukça az bir etkisi olmasına rağmen Uluslararası
Elektroteknik Komisyon standartının(IEC 61000-4-21) önerdiği limitleri elde
etmek için karıştırıcı konumun belirlenmesinin önemli ölçüde bir etkiye sahip
olduğu gözlemlenmiştir. 

References

  • Başyiğit İ.B., Doğan H., Helhel S., "Simulation of metallic enclosures with apertures on Electrical Shielding Effectiveness", ELECO 2017 10th International Conference on Electrical and Electronics Engineering, BURSA, TÜRKIYE, 30 Kasım - 2 Aralık 2017, vol.1, no.1, pp.1082-1084
  • Basyigit, Ibrahim Bahadir; Genc, Abdullah; Helhel, Selcuk, Electrical Shielding Effectiveness of Metallic Enclosures; Effect of Source Orientation and Aperture Dimension, Conference: Progress in Electromagnetics Research Symposium - Spring (PIERS) Location: St Petersburg, RUSSIA Date: MAY 22-25, 2017
  • Besnier, P., Démoulin, B., 2011, Electromagnetic Reverberation Chambers. 10.1002/9781118602034.ch3.
  • B. Zhang, W. Li, X. Li, Z. Yuan, J. He and R. Zeng, "Field Uniformity Investigation of Reverberation Chamber at Calibration Stage," 2009 20th International Zurich Symposium on Electromagnetic Compatibility, Zurich, 2009, pp. 45-48. doi: 10.1109/EMCZUR.2009.4783386
  • C. Bruns and R. Vahldieck, “A Closer Look at Reverberation Chambers - 3-D Simulation and Experimental Verification”. IEEE Transactions on Electromagnetic Compatibility., vol.47, no.3, pp.612-616, Oct. 2005.
  • Hemming, L.H., Electromagnetic Anechoic Chambers: A Fundamental Design and Specification Guide [Book Review]. Instrumentation & Measurement Magazine, IEEE. 2003 6. 67- 67. 10.1109/MIM.2003.1184319.
  • Hong, J., Huh, C., 2010, Optimization of stirrer with various parameters in reverberation chamber. Progress in Electromagnetics Research-pier - PROG ELECTROMAGN RES. 104. 15-30. 10.2528/PIER09121610.
  • Huang, Y., et al. “Comparison of Two Stirrer Designs for a New Reverberation Chamber.” The 2006 4th Asia-Pacific Conference on Environmental Electromagnetics(2006): 450-453.
  • IEC 61000-4-21:2003, Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation Chamber Test Methods[S].J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68–73.
  • Lovat, Giampiero. (2007). Electromagnetic Shielding.
  • Lundén, O., Wellander, N., Bäckström, M., 2010, Stirrer Blade Separation Experiment in Reverberation Chambers. 526 - 529. 10.1109/ISEMC.2010.5711331.
  • Nisanci, M., E. Kucuksille, Y. Cengiz, A. Orlandi, and A. Duffy, "The prediction of the electric field level in the reverberation chamber depending on position of stirrer," Expert Systems with Applications, Vol. 38, No. 3, 1689-1696, 2011.
  • Urul, B., Helhel, S., Basyigit, I., Göksu, T., 2017, CST Simulation of Reverberation Chamber for Improved Field Uniformity.
  • Wellander, N., Lundén, O., Bäckström, M., 2007, Experimental Investigation and Mathematical Modeling of Design Parameters for Efficient Stirrers in Mode-Stirred Reverberation Chambers. Electromagnetic Compatibility, IEEE Transactions on. 49. 94 - 103. 10.1109/TEMC.2006.888166.
  • Weston, David., Electromagnetic Compatibility: Principles and Applications / D.A. Weston.. Materials & Design.1992., 13. 10.1016/0261-3069(92)90250-L.
  • Yardım, F.E., Akcam, N., vd., "Shielding Effect Analysis of Various Configurations of the Square Patch Elements", GU J Sci, 30(2): 123-132, (2017).
There are 16 citations in total.

Details

Primary Language Turkish
Subjects Electrical Engineering
Journal Section Araştırma Articlessi \ Research Articles
Authors

Bülent Urul 0000-0003-2656-2450

Bilal Tütüncü 0000-0002-7439-268X

Selçuk Helhel 0000-0002-1401-3297

Publication Date March 25, 2019
Submission Date September 27, 2018
Acceptance Date December 5, 2018
Published in Issue Year 2019 Volume: 7 Issue: 1

Cite

APA Urul, B., Tütüncü, B., & Helhel, S. (2019). YANSIMALI ODA İÇERİSİNE BİR KARIŞTIRICI EKLENMESİNİN VE KARIŞTIRICI KONUMUNUN ELEKTRİK ALAN DÜZGÜNLÜĞÜNE ETKİSİNİN İNCELENMESİ. Mühendislik Bilimleri Ve Tasarım Dergisi, 7(1), 115-125. https://doi.org/10.21923/jesd.464439