Investigation of the Effects of Discontinuities on the Mechanical Properties of Micro Lattice Structures Produced by the Selective Laser Melting Method

Year 2020, Volume: 3 Issue: 2, 58 - 67, 31.12.2020

Altuğ Uşun , Recep Gümrük

Abstract

In this study, the effects of defects such as dust, voids and geometric distortions occurring in micro lattice structures produced by selective laser melting on mechanical properties were investigated. Micro lattice structures are made of 316L stainless steel material, in the form of a body-centered cubic (BCC) structure, with struts of 200 µm diameter. Defects occurring on the surface was modeled realistically using the scanning electron microscope images. The mechanical properties of the structure were examined by using the experimental and finite element method with compression tests. As a result of the tests carried out, it was observed that the finite element results converged to the experimental data by increasing the number of cells and increasing the number of wires accordingly. In the realistic modelling of the compression tests, considering the analysis time and the convergence to the experimental results, it is found out that at least two half-cells should be modeled. Although it is seen that the micro powders adhering on the part do not have much effect on the stress value, it has been determined that the strain value change makes it more realistic due to the early contact areas.

Keywords

Micro Lattice Structures, Selective Laser Melting, Cellular Materials, Additive Manufacturing, Finite Element Analysis

Seçici Lazer Ergitme Yöntemi ile Üretilen Mikro Kafes Yapıların Yüzeyinde Meydana Gelen Kusurların Mekanik Özelliklere Etkilerinin İncelenmesi

Abstract

Bu çalışmada seçici lazer ergitme yöntemi ile üretilen mikro kafes yapılarda meydana gelen boşluklar, yüzeye yapışan tozlar ve geometrik çarpılmalar gibi kusurların mekanik özelliklere etkileri incelenmiştir. Mikro kafes yapılar 316L paslanmaz çelik malzemesinden, hacim merkezli kübik (BCC) yapı şeklinde, 200 µm çapında tellerden meydana gelecek şekilde üretilmiştir. Taramalı elektron mikroskobu görüntüleri kullanılarak yüzeyde meydana gelen kusurlar gerçeğe yakın katı modellenmiştir. Kafes yapıların mekanik özellikleri deneysel ve sonlu elemanlar yöntemi kullanılarak basma testleri ile incelenmiştir. Yapılan testler sonucunda hücre sayısının arttırılması, buna bağlı olarak tel sayısının arttırılması ile sonlu elemanlar sonuçlarının deneysel verilere yakınsadığı gözlemlenmiştir. Sıkışma bölgesinin gerçeğe yakın modellenmesinde, analiz süresi ve deneysel sonuçlara yakınsama göz önüne alındığında en az iki yarım hücrenin modellenmesi gerektiği görülmüştür. Parça üzerine yapışan mikro tozların gerilme değeri üzerinde çok etkisinin olmadığı görülse de erken temas bölgeleri oluşturmaları sebebi ile birim şekil değişiminin gerçeğe daha yakın hale getirdiği saptanmıştır.

Keywords

Mikro Kafes Yapılar, Seçici Lazer Ergitme, Hücresel Malzemeler, Eklemeli İmalat, Sonlu Elemanlar Yöntemi

References

• Tsopanos S, Mines RAW, McKown S, Shen Y, Cantwell WJ, Brooks W, et al. The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures. J Manuf Sci Eng 2010;132:041011.
• Gümrük R, Altuğ UŞ. Akımsız nikel kaplanmış mikro kafes yapıların mekanik özelliklerinin incelenmesi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi. 2020 Oct 1;35(4):1783-98.
• Cerardi A, Caneri M, Meneghello R, Concheri G, Ricotta M. Mechanical Characterization of Polyamide Cellular Structures Fabricated Using Selective Laser Sintering Technologies. J Mater 2012.
• Yan C, Hao L, Hussein A, Young P, Raymont D. Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting. Mater Des 2014;55:533–41.
• Yan C, Hao L, Hussein A, Young P, Huang J. Materials Science & Engineering A Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering. Mater Sci Eng A 2015;628:238–46.
• Hahnlen R, Dapino MJ. Composites : Part B NiTi – Al interface strength in ultrasonic additive manufacturing composites. Compos PART B 2014;59:101–8.
• Dehoff RR, Babu SS. Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing. Acta Mater 2010;58:4305–15.
• Friel RJ, Harris RA. Ultrasonic additive manufacturing A hybrid production process for novel functional products. Procedia - Soc Behav Sci 2013;6:35–40.
• Karamooz Ravari MR, Kadkhodaei M, Badrossamay M, Rezaei R. Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling. Int J Mech Sci 2014;88:154–61.
• Rezaie R, Badrossamay M, Ghaie A, Moosavi H. Topology optimization for fused deposition modeling process. Procedia - Soc Behav Sci 2013;6:522–7.
• Xiong J, Mines R, Ghosh R, Vaziri A, Ma L, Ohrndorf A, et al. Advanced Micro-Lattice Materials. Adv Eng Mater 2015;17:1253–64.
• Poon B, Rittel D, Ravichandran G. An analysis of nanoindentation in linearly elastic solids. Int J Solids Struct 2008;45:6018–33.
• Ushijima K, Cantwell WJ, Mines RAW, Tsopanos S, Smith M. An investigation into the compressive properties of stainless steel micro-lattice structures. J Sandw Struct Mater 2011;13:303–29.
• Gümrük R, Mines RAW. Compressive behaviour of stainless steel micro-lattice structures. Int J Mech Sci 2013;68:125–39.
• Gümrük R, Uşun A, Mines RAW. Enhancement of the Mechanical Performance of Stainless Steel Micro Lattice Structures Using Electroless Plated Nickel Coatings. Proceedings 2018;2:494.
• Gümrük R, Mines RAW, Karadeniz S. Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions. Mater Sci Eng A 2013;586:392–406.
• Ptochos E, Labeas G. Elastic modulus and Poisson’s ratio determination of micro-lattice cellular structures by analytical, numerical and homogenisation methods. J Sandw Struct Mater 2012;14:597–626.
• Gorny B, Niendorf T, Lackmann J, Thoene M, Troester T, Maier HJ. In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Mater Sci Eng A 2011;528:7962–7.
• Campoli G, Borleffs MS, Amin Yavari S, Wauthle R, Weinans H, Zadpoor AA. Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing. Mater Des 2013;49:957–65.
• Karamooz Ravari MR, Kadkhodaei M, Badrossamay M, Rezaei R. Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling. Int J Mech Sci 2014;88:154–61.
• Karamooz Ravari MR, Kadkhodaei M. A Computationally Efficient Modeling Approach for Predicting Mechanical Behavior of Cellular Lattice Structures. J Mater Eng Perform 2015;24:245–52.
• Lozanovski B, Leary M, Tran P, Shidid D, Qian M, Choong P, et al. Computational modelling of strut defects in SLM manufactured lattice structures. Mater Des 2019;171:107671.
• Lei H, Li C, Meng J, Zhou H, Liu Y, Zhang X. Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ -CT-based fi nite element analysis. Mater Des 2019;169:107685.
• Araya-Calvo M, López-Gómez I, Chamberlain-Simon N, León-Salazar JL, Guillén-Girón T, Corrales-Cordero JS, et al. Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology. Addit Manuf 2018;22:157–64.