Research Article

Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi

Volume: 14 Number: 1 March 1, 2024
EN TR

Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi

Abstract

Grafen oksit kullanılarak atıksulardan nikelin gideriminin amaçlandığı bu çalışmada, metal kaplama endüstrisi atıksuyundaki 18.08 – 183.95 mg/L Ni(II) konsantrasyon aralığı için bir dizi adsorpsiyon çalışması gerçekleştirilmiştir. 200 rpm sabit karıştırma devri altında optimum pH=6 ve optimum temas süresi 90 dakika olarak bulunmuştur. Adsorpsiyonda kinetik olarak; yalancı 2. derece kinetik izoterm olarak Temkin izotermi uygun model olarak seçilmiştir. Adsorbent olarak optimum grafen oksit miktarı 0.016 mg/L ve buna bağlı olarak maksimum adsorplama kapasitesi 112.56 mg/g belirlenmiştir. Literatür karşılaştırmaları da dikkate alınarak; grafen oksitin geliştirilebilir bir adsorbent olarak kullanılabileceği, bununla birlikte tek başına yüksek verim elde edilemeyeceği ancak fonksiyonelleştirilmesi halinde grafen oksit ile yüksek verim sağlanabileceği sonucuna varılmıştır.

Keywords

Supporting Institution

Ondokuz Mayıs Üniversitesi

Project Number

PYO.MUH.1904.17.023

References

  1. Alves, H. ve Heubner, U. (2016). Aqueous Corrosion Of Nickel And İts Alloys. Reference Module in Materials Science and Materials Engineering. Elsevier Reference Colletion. pp. 1-35. Hollanda
  2. Ain, Q., Farooq, M.U., Jaless M.I., (2020). Application of Magnetic Graphene Oxide for Water Purification: Heavy Metals Removal and Disinfection.Journal of Water Process Engineering. 33.101044.
  3. Callender, E., (2003). Heavy Metals in the Environment – Historical Trends. Treatise on Geochemistry. 20: 59–89.
  4. Carolin, C. F., Kumar, P. S, Saravanan, A., Joshiba, G.J., Naushad, M., (2017). Efficient Techniques For The Removal Of Toxic Heavy Metals From Aquatic Environment: A Review. Journal of Environmental Chemical Engineering.5(3): 2782-2799.
  5. Chen, L., Li, N., Wen, Z., Zhang, L., Chen, Q., Chen, L., Si, P., Feng, J., Li, Y., Lou, J., C., (2018). Graphene Oxide Based Membrane İntercalated By Nanoparticles For High Performance Nanofiltration Application. Chemical Engineering Journal. 347. 12-18.
  6. Chen, R., Cheng, Y., Wang, P., Wang, Q., Wan, S., Huang, S., Su, R., Song, Y., Wang, Y., (2021). Enhanced removal of Co(II) and Ni(II) from high-salinity aqueous solution using reductive self-assembly of three-dimensional magnetic fungal hypal/graphene ozide nanofibers.Science of The Total Environment. 756. 143871.
  7. Fu, F., Wang, Q., (2011). Removal Of Heavy Metal İons From Wastewaters: A Review. Journal of Environmental Management. 92(3). 407-418.
  8. Hao, J. Ji, L. Li, C. Hu, C. and Wu, K. (2018). Rapid, efficient and economic removal of organic dyes and heavy metals from wastewater by zinc-induced in-situ reduction and precipitation of graphene oxide. Journal of the Taiwan Institute of Chemical Engineers, 88, 137-145. doi:10.1016/j.jtice.2018.03.045

Details

Primary Language

Turkish

Subjects

Environmental Engineering

Journal Section

Research Article

Early Pub Date

February 20, 2024

Publication Date

March 1, 2024

Submission Date

November 3, 2022

Acceptance Date

January 8, 2024

Published in Issue

Year 2024 Volume: 14 Number: 1

APA
Kılıç, F. C., & Akdemir, A. (2024). Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi. Journal of the Institute of Science and Technology, 14(1), 115-124. https://doi.org/10.21597/jist.1198627
AMA
1.Kılıç FC, Akdemir A. Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi. J. Inst. Sci. and Tech. 2024;14(1):115-124. doi:10.21597/jist.1198627
Chicago
Kılıç, Funda Cemre, and Andaç Akdemir. 2024. “Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi”. Journal of the Institute of Science and Technology 14 (1): 115-24. https://doi.org/10.21597/jist.1198627.
EndNote
Kılıç FC, Akdemir A (March 1, 2024) Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi. Journal of the Institute of Science and Technology 14 1 115–124.
IEEE
[1]F. C. Kılıç and A. Akdemir, “Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi”, J. Inst. Sci. and Tech., vol. 14, no. 1, pp. 115–124, Mar. 2024, doi: 10.21597/jist.1198627.
ISNAD
Kılıç, Funda Cemre - Akdemir, Andaç. “Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi”. Journal of the Institute of Science and Technology 14/1 (March 1, 2024): 115-124. https://doi.org/10.21597/jist.1198627.
JAMA
1.Kılıç FC, Akdemir A. Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi. J. Inst. Sci. and Tech. 2024;14:115–124.
MLA
Kılıç, Funda Cemre, and Andaç Akdemir. “Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi”. Journal of the Institute of Science and Technology, vol. 14, no. 1, Mar. 2024, pp. 115-24, doi:10.21597/jist.1198627.
Vancouver
1.Funda Cemre Kılıç, Andaç Akdemir. Adsorbent Olarak Grafen Oksit Kullanılarak Metal Kaplama Atıksuyunda Nikel (II) Giderimi. J. Inst. Sci. and Tech. 2024 Mar. 1;14(1):115-24. doi:10.21597/jist.1198627

Cited By