Properties of GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 Composites For Electromagnetic Shielding Applications

Abstract

In this study, GdMnO3-Ba(Zn1/3Nb2/3)O3 was manufactured using the mixture of oxides technique. GdMnO3-Ba(Zn1/3Nb2/3)O3 compositional compounds were formed in various ratios for structural analysis. Single-phase composition of GdMnO3 and Ba(Zn1/3Nb2/3)O3 were produced after sintering between 1200-1400°C. Structural analysis results showed that the second phase did not occur in GdMnO3 and Ba(Zn1/3Nb2/3)O3. X-ray diffraction (XRD) was performed for structural analysis. In addition, GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 composites were produced by hot pressing method using various amounts of GdMnO3-Ba(Zn1/3Nb2/3)O3 and aniline. The weight ratios of (GdMnO3-Ba(Zn1/3Nb2/3)O3) and aniline were 1:1, respectively. The GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 compound formed in various weights, and epoxy powder were used to produce microwave shielding effect composites. Using a network analyzer (NA), the microwave shielding effect of GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 composites was investigated in the range of 8-18 GHz. A minimum shielding effect value of -56.77 dB was obtained at 15.77 GHz at 1.4 mm thickness. The GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 was produced as composite material and their properties were characterized for shielding effect. This microwave shielding performance can be easily adjusted by controlling the polyaniline content and GdMnO3-Ba(Zn1/3Nb2/3)O3 content in the samples for wider and required frequency bands.

Keywords

• XRD
• SEM
• Network Analyzer

Elektromanyetik Ekranlama Uygulamaları İçin GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 Kompozitlerin Özellikleri

Abstract

Bu çalışmada, oksitlerin karışımı tekniği kullanılarak GdMnO3-Ba(Zn1/3Nb2/3)O3 üretilmiştir. GdMnO3-Ba(Zn1/3Nb2/3)O3 kompozisyon bileşimleri yapısal analiz için çeşitli oranlarda oluşturulmuştur. Tek fazlı GdMnO3 ve Ba(Zn1/3Nb2/3)O3 bileşimi, 1200-1400°C arasında sinterlendikten sonra üretilmiştir. Yapısal analizi sonuçları, GdMnO3 ve Ba(Zn1/3Nb2/3)O3 ‘de ikinci fazın oluşmadığını göstermiştir. Yapısal analiz için X-ışını kırınımı (XRD) yapıldı. Ek olarak, GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 kompozitleri çeşitli miktarlarda GdMnO3-Ba(Zn1/3Nb2/3)O3 ve anilin bileşimleri kullanılarak sıcak presleme yöntemiyle üretilmiştir. (GdMnO3-Ba(Zn1/3Nb2/3)O3) ve anilin ağırlık oranları sırasıyla 1:1 idi. Çeşitli ağırlıklarda oluşturulan GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 bileşiği ve epoksi tozu kullanılarak mikrodalga kalkanlama etkili kompozitler üretilmiştir. Bir ağ analizör cihazı (NA) kullanılarak, GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 kompozitlerinin mikrodalga ekranlama etkisi 8-18 GHz aralığında incelenmiştir. 1.4 mm kalınlıkta 15.77 GHz'de minimum -56.77 dB ekranlama etkisi değeri elde edilmiştir. GdMnO3/PANI/Ba(Zn1/3Nb2/3)O3 kompozit malzeme olarak üretilmiş ve kalkanlama etkisi için özellikleri karakterize edilmiştir. Bu mikrodalga koruma performansı, daha geniş ve gerekli frekans bantları için örneklerdeki polianilin içeriği ve GdMnO3-Ba(Zn1/3Nb2/3)O3 içeriği kontrol edilerek kolayca ayarlanabilir.

Keywords

• XRD
• SEM
• Ağ Analizör

Thanks

Bu çalışma yardımları asla unutulmayacak Emsal Şahin, Salim Şahin ve Prof. Dr. Ayhan Mergen anısına ithafendir

References

1. Bhingardive, V., Sharma, M., Suwas, S., Madras, G., Bose, S. (2015). Polyvinylidene fluoride based lightweight ve corrosion resistant electromagnetic shielding materials. RSC Advances, 5, 35909-35916.
2. Chaudhary, A., Kumari, S., Kumar, R., Teotia, S., Singh, B. P., Singh, A. P., Dhawan, S. K., Dhakate, S. R. (2016). Lightweight ve easily foldable MCMB-MWCNTs composite paper with exceptional electromagnetic interference shielding. ACS Applied Materials & Interfaces, 8(16), 10600-10608.
3. Chen, Z., Yi, D., Shen, B., Zhang, L., Ma, X., Pang, Y., Liu, L., Wei, X., Zheng, W. (2018). Semi-transparent biomass-derived macroscopic carbon grids for efficient and tunable electromagnetic shielding. Carbon, 139, 271-278.
4. Chung D. D. L. (2000). Materials for electromagnetic interference shielding. JMEPEG, 9, 350-354.
5. Gogotsi, Y., Huang, Q. (2021). MXenes: Two-dimensional building blocks for future materials and devices. ACS Nano, 15(4), 5775-5780.
6. Golezani, J. J., Kartal, M., Döken, B., Paker, S. (2022). Trible-band frequency selective surface design effective over oblique incidence angles for GSM system. IETE Journal of Research. 68(2), 1406-1410.
7. Guan, X., Yang, Z., Zhou, M., Yang, L., Peymanfar, R., Aslibeiki, B., ve Ji, G. (2022). 2D Mxene nanomaterials: synthesis, mechanism, and multifunctional applications in microwave absorption. Small Structures, 3, 2200102.
8. Hamouni, M., Heddar, S., Ansri, A., Khaldi, S. (2014). A comparative study of electromagnetic shielding efficiency of composites conducting polymers in near and far-fields. Journal of Materials and Environmental Science, 5(3), 945-950.

9. Huang, M., Yang, X., ve Jiang, F. (2018). Dielectric and luminescent properties of Sm3+ doped Ba(Zn1/3Nb2/3)O3 ceramics with perovskite strycture, Materials Research Express, 5(6), 066301.
10. Ibrahim, J. E. (2015). Enhancement of Structural and Magnetic Properties of Eu and Fe Doped GdMnO3 and Cr Doped HoMnO3 Multiferroic Ceramics (Yüksek lisans tezi). Erişim adresi: https://tez.yok.gov.tr/UlusalTezMerkezi
11. Ibrahim, J. F. M., Mergen, A., Sahin, E. İ., Basheer, H. S. (2017). The effect of europium doping on the structural and magnetic properties of GdMnO3 multiferroic ceramics. Advanced Ceramics Progress, 3(4), 1-5.
12. Lalan, V., Ganesanpotti, S. (2020). Broadband electromagnetic response and enhanced microwave absorption in carbon black and magnetic Fe3O4 nanoparticles reinforced polyvinylidenfluoride composites. Journal of Electronic Materials, 49(3), 1666-1676.
13. Liu, L., Bian, X.-M., Hou, Z.-L, Wang, C-Y., Li, Z. S., Hu, H. D., Qi, X. & Zhang, X. (2016). Electromagnetic response of magnetic graphene hybrid fillers and their evolutionary behaviors. Journal of Materials Science: Materials in Electronics, 27, 2760-2772.
14. Ma, X., Zhang, X., Li, Y., Li, G., Wang, M., Chen, H., Mi, Y. (2006). Preparation of nano-structured polyaniline composite film via ‘‘Carbon Nanotubes Seeding’’ approach and its gas-response studies. Macromolecular Materials Engineering, 291(1), 75-82.
15. Meisak, D., Plyushch, A., Macutkevič, J., Grigalaitis, R., Sokal, A., Lapko, K. N., Selskis, A., Kuzhir, P., Banys, J. (2023). Effect of temperature on shielding efficiency of phosphate-bonded CoFe2O4 – xBaTiO3 multiferroic composite ceramics in microwaves. Journal of Materials Research and Technology, 24, 1939-1948.
16. Qasrawi, A. F., Hamarsheh, A. A. (2022). Structural, optical and electrical properties of band-aligned CdBr2/Au/Ga2S3 interfaces and their application as band filters suitable for 5G technologies. Journal of Electronic Materials, 51, 3693-3704.
17. Qasrawi, A. F, Sahin, E. İ., Emek, M., Kartal, M., Kargin, S. (2019). Structural and dielectric performance of the Ba(Zn1/3Nb2/3)O3 perovskite ceramics. Materials Research Express, 6, 095095.
18. Santhosi, B. V. S. R. N, Ramji, K., Rao, N. B. R. Mohan. (2020). Design and development of polymeric nanocomposite reinforced with graphene for effective EMI shielding in X-band. Phsica B: Condensed Matter, 586, 412144.
19. Schnitzler, D. C., Meruvia, M. S., Hümmelgen, I., Aldo, J., Zarbin, G. (2003). Preparation and characterization of novel hybrid materials formed from (Ti,Sn)O2 nanoparticles and polyaniline. Chemistry of Materials, 15(24), 4658-4665.
20. Shahzad, F., Alhabeb, M., Hatter, Christine B., Anasori, B., Hong, S. M., Koo, C. M., Gogotsi, Y. (2016). Electromagnetic interference shielding with 2D transition metal carbides (MXenes). Science, 353(6304), 1137-40.
21. Shukla, V. (2020). Role of spin disorder in magnetic and EMI shielding properties of Fe3O4/C/PPy core/shell composites. Journal of Materials Science. 55, 2826-2835.
22. Şahin, E. İ., Emek, M., Ertuğ, B., Kartal, M. (2020). Electromagnetic shielding performances of Colemanite/PANI/SiO2 composites. Beykent Üniversitesi Fen ve Mühendislik Dergisi, 13(1), 34-42.
23. Şahin, E. İ. (2023). Electromagnetic shielding effectiveness of Ba(Zn1/3Nb2/3)O3: chopped strands composites for wide frequency applications. Journal of Ceramic Processing Research, 24(1), 190-196.
24. Şahin, E. İ. (2022). Microwave electromagnetic shielding effectiveness of ZnNb2O6-chopped strands composites for radar wideband (6.5-18 GHz) applications. Lithuanian Journal of Physics, 62(3), 161-170.
25. Şahin, E. İ. (2019). Katkılı NiFe2O4 Polimer Tabanlı Mikrodalga Yutucuların Frekans Seçici Malzeme Tasarımı (Doktora Tezi). Erişim adresi: https://tez.yok.gov.tr/UlusalTezMerkezi
26. Şahin, E. İ. (2010). Yeni Ba(Zn1/3Nb2/3)O3 Bazlı Dielektrik Malzemelerin Üretimi ve Karakterizasyonu (Yüksek Lisans). Erişim adresi: https://tez.yok.gov.tr/UlusalTezMerkezi
27. Şahin, E. İ., Emek, M., Ibrahim, J. E. F. M. (2022). CuO/PANI/Kolemanit Kompozitlerin Geniş Bant Elektromanyetik Ekranlama Etkinliği. Prof. Dr. Elif Orhan, Dr. Öğr. Üyesi Elanur Seven, Teoriden Uygulamaya Fizik ve Matematik Alanında Akademik Çalışmalar (S. 121-132) içinde. İksad Publishing House.
28. Şahin, E. İ. & Emek, M. (2023). Elektromanyetik kirlilik ortamında Kaolinit/PVA kompozitlerin elektromanyetik kalkanlama özellikleri. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 22(43), 194-204.
29. Şahin, E. İ., Emek, M., Ibrahim, J. E. F. M. (2023). Instrumental measurements laboratory (1st ed.). Iksad Publishing House.
30. Tariq, F., Shifa, M., Tariq, M., Kazim Hasan, S., & Baloch, R. A. (2015). Hybrid nanocomposite material for EMI shielding in spacecrafts. Advanced Materials Research, 1101, 46-50.
31. Ting, T. H., Yu, R. P., Jau, Y. N. (2011). Synthesis and microwave absorption characteristics of polyaniline/NiZn ferrite composites in 2–40 GHz. Materials Chemistry Physics, 126(1-2), 364-368.
32. Topcu, İ. (2020). Investigation of wear behavior of particle reinforced AL/B4C composites under different sintering conditions. Tehnicki Glasnik, 14(1), 7-14.
33. Topcu, İ. (2022). Sol-Jel yöntemi ile üretilen silica tabanlı hidrofobik aerojellerin karakterizasyon özelliklerinin incelenmesi. Avrupa Bilim ve Teknoloji Dergisi, 45, 1-7.
34. Topcu, İ. (2021). Examination of wear properties of Al/B4C composites reinforced with irregularly shaped B4C. Journal of Ceramic Process Research, 22(3), 276-282.
35. Wang, X. C. ve Liu, Z. (2012). A new computation of shielding effectiveness of electromagnetic radiation shielding fabric. Progress In Electromagnetics Research Letters, 33, 177-186.
36. Wang, M., Wang, R., Dai, H., Li, T., Chen, J., Liu, D., Yan, F., Chen, D. (2022). The structure, optical and magnetic properties of GdMnO3 nano ceramics induced by aluminum substitution. Journal of Magnetism and Magnetic Materials, 553, 169256.
37. Xiangcheng, L., Chung, D. D. L. (1999). Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites. Composites Part B: Engineering, 30(3), 227–231.
38. Yang, C. C., Gung, Y. J., Hung, W. C., Ting, T. H., Wu, K. H. (2010). Infrared and microwave absorbing of BaTiO3/Polyaniline and BaFe12O19/Polyaniline composites. Composites Science and Technology, 70(3), 466-471.
39. Ye, F., Dai, H., Wang, M., Chen, J., Li, T. & Chen, Z. (2020). The structural, dielectric, and magnetic properties of GdMnO3 multiferroic ceramics. Journal of Materials Science: Materials in Electronics, 31, 3590-3597.
40. Zhang, W., Zhang, X., Wu, Z., Abdurahman, K., Cao, Y., Duan, H., Jia, D. (2019). Mechanical, electromagnetic shielding and gas sensing properties of flexible cotton fiber/polyaniline composites. Composites Science and Technology, 188, 107966.