Review
BibTex RIS Cite

A Review on the Effects of Using Dimethyl Ether on Particulate Matter Emissions in Diesel Engines

Year 2023, Volume: 13 Issue: 2, 1212 - 1229, 01.06.2023

İsmet Sezer

https://doi.org/10.21597/jist.1117505

Abstract

This review study was created from the various studies which were completed on the use of dimethyl ether (DME) in diesel engines as a fuel or fuel additive. The several methods are available for the decreasing of the harmful emissions in diesel engines. The first method for the reduction of harmful emissions is improved the combustion by modification of engine design and fuel injection system, but this process is expensive and time consuming. The second method is the using various exhaust gas devices like catalytic converter and diesel particulate filter. However, the use of such devices affects negatively diesel engine performance. The last method to reduce emissions and also improve diesel engine performance is the use of various alternative fuels or fuel additives. The major pollutants of diesel engines are oxides of nitrogen (NOx) and particulate matter (PM). It is very difficult to reduce NOx and PM simultaneously in practice. The most researches declare that the best way to reduce these emissions is the use of various alternative fuels i.e. natural gas, biogas, biodiesel or using some additives with the alternative fuels or conventional diesel fuel. Therefore, it is very important that the results of various studies on alternative fuels or fuel additives are evaluated together to practice applications. Especially, this study focuses on the usage of dimethyl ether in diesel engines as fuel or fuel additive. This review study investigates the effects of using dimethyl ether on particulate matter (PM) emissions. As a result of this review study; it was determined that when DME is used in pure form, it provides nearly zero PM emission due to its features such as high oxygen content, the absence of directly bonded carbon in its chemical structure, rapid evaporation, high cetane number and low ignition temperature. It was determined that pure DME was found to reduce the PM emissions by 13–228% compared to diesel fuel and 88.6–227.6% compared to biodiesel fuel. It was also determined that diesel–DME blends containing different ratios of DME reduced the PM emissions by 4.7–509% compared to diesel fuel, and biodiesel–DME blends containing different ratios of DME reduced the PM emissions by 38.2% compared to biodiesel fuel. On the other hand, it was determined that the LPG–DME blend decreased the PM emissions by 269–493% compared to diesel fuel, and the DME–NH3 blends containing different amounts of DME increased the PM emissions by 40.7–96.7% compared to pure DME. Moreover, it was determined that changing the exhaust gas recirculation (EGR) ratio between 10–50% increased PM emissions by 13.1–48.4%.

Keywords

Diesel engine Dimethyl ether Engine performance Fuel additive PM emissions

References

  • Abhishek, Rahul, K., Santosh, K. ve Martha, O. (2017). Blending impacts of biogas and dimethyl ether (DME) on compressed ignition engine. International Research Journal of Engineering and Technology, 4(4), 2174–2177.
  • Alam, M. ve Kajitani, S. (2001). DME as an alternative fuel for direct injection diesel engine. 4th International Conference on Mechanical Engineering, December 26–28, Dhaka., Bangladesh, pp. 87–92.
  • Ambekar, Y. ve Hole, J. A. (2018). Preliminary optimization of duel fuel engine using dimethyl ether premixed combustion. International Research Journal of Engineering and Technology, 5(10), 274–278.
  • Arcoumanis, C., Bae, C., Crookes, R. ve Kinoshita, E. (2008). The potential of di–methyl ether (DME) as an alternative fuel for compression–ignition engines: A review. Fuel, 87(7), 1014–1030.
  • Azizi, Z., Rezaeimanesh, M., Tohidian, T. ve Rahimpour, M. R. (2014). Dimethyl ether: A review of technologies and production challenges. Chemical Engineering and Processing, 82, 150–172.
  • Barro, C., Parravicinia, M. ve Boulouchos, K. (2019). Neat polyoxymethylene dimethyl ether in a diesel engine; part 1: Detailed combustion analysis. Fuel, 256: 115892.
  • Baskaran, R. (2015). Analysis on synthesis, storage & combustion characteristics of DME as fuel in CI engines. International Journal for Research in Applied Science & Engineering Technology, 3(1), 133–140.
  • Benajes, J., Novella, R., Pastor, J. M., Hernández–López, A. ve Kokjohn, S. L. (2018). Computational optimization of the combustion system of a heavy duty direct injection diesel engine operating with dimethyl–ether. Fuel, 218, 127–139.
  • Benajes, J., Novella, R., Pastor, J. M., Hernández–López, A. ve Kokjohn S. L. (2018). Computational optimization of a combustion system for a stoichiometric DME fueled compression ignition engine. Fuel, 223, 20–31.
  • Bogdan, J., Nicolae, B., Călin, I. ve Vlad, B. N. (2017). Study of emissions for a compression ignition engine fueled with a mix of DME and diesel. Materials Science and Engineering, 252, 1–9.
  • Chapman, E. M. ve Boehman, A. L. (2008). Pilot ignited premixed combustion of dimethyl ether in a turbodiesel engine. Fuel Processing Technology, 89, 1262–1271.
  • Chen, Z., Konno, M. ve Kajitani, S. (2000). Performance and emissions of DI compression ignition engines fueled with dimethyl ether. JSME International Journal, 43(1), 82–88.
  • Deepak, K. M., Karthick, M,, Dineshbabu, D., Srikanth, P. ve Ramachandran, M. G. (2015). Investigation on the effect of dimethyl ether in compression ignition engine. International Journal of Innovative Research in Science, Engineering and Technology, 4(2), 401–407.
  • Duan, J., Sun, Y., Yang, Z. ve Sun, Z. (2012). Combustion and emissions characteristics of diesel engine operating on composite combustion mode of DME and diesel. Proceedings of International Conference on Mechanical Engineering and Material Science, Shanghai, China, pp. 463–466.
  • El–Hagar, M. M. E.–G. (2014). Effect of diethyl ether and dimethyl ether with liquefied petroleum gas on combustion and emissions characteristics of diesel engine. International Journal of Computer Science and Engineering, 2(3), 193–198.
  • García, A., Gil, A., Monsalve–Serrano, J. ve Sari, R. L. (2020). OMEx–diesel blends as high reactivity fuel for ultra–low NOx and soot emissions in the dual–mode dual–fuel combustion strategy. Fuel, 275, 117898.
  • Genbao, L., Jianming, C., Minglong, L., Yuhua, Q. ve Zhaoyang, C. (2012). Experimental study on the size distribution characteristics of spray droplets of DME/diesel blended fuels. Fuel Processing Technology, 104, 352–355.
  • Geng, P., Cao, E., Tan, Q. ve Wie, L. (2017). Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review. Renewable and Sustainable Energy Reviews, 71, 523–534.
  • Guangxin, G., Zhulin, Y., Apeng, Z., Shenghua, L. ve Yanju, W. (2013). Effects of fuel temperature on injection process and combustion of dimethyl ether engine. Journal of Energy Resources Technology, 135, 1–5.
  • Hewu, W. ve Longbao, Z. (2017). Performance of a direct injection diesel engine fuelled with a dimethyl ether/diesel blend. Journal of Automobile Engineering, 217(9), 819–824.
  • Hou, J., Wen, Z., Jiang, Z. ve Qiao, X. (2014). Study on combustion and emissions of a turbocharged compression ignition engine fueled with dimethyl ether and biodiesel blends. Journal of the Energy Institute, 87, 102–113.
  • Huang, Z., Qiao, X., Zhang, W., Wu, J. ve Zhang, J. (2009). Dimethyl ether as alternative fuel for CI engine and vehicle. Frontiers of Energy and Power Engineering in China, 3(1), 99–108.
  • Inayat, A., Ghenai, C., Naqvi, M., Ammar, M., Ayoub, M. ve Hussin, M. N. B. (2017). Parametric study for production of dimethyl ether (DME) as a fuel from palm wastes. Energy Procedia, 105, 1242–1249.
  • Jalanapurkar, M., Patel, K., Patel, T., Rathod, G. ve Granipa, H. (2015). A literature review on combine effect of di–methyl ether (DME) as an additive & the injection pressure on the performance & emission of 4 stroke C.I. engine. International Journal of Advance Engineering and Research Development, 2(1), 262–266.
  • Jang, J. ve Bae, C. (2009). Effects of valve events on the engine efficiency in a homogeneous charge compression ignition engine fueled by dimethyl ether. Fuel, 88, 1228–1234.
  • Jeon, J., Kwon, S., Park, Y. H., Oh, Y. ve Park, S. (2014). Visualizations of combustion and fuel/air mixture formation processes in a single cylinder engine fueled with DME. Applied Energy, 113, 294–301.
  • Kajitani, S. (2004). A study of low compression ratio diesel engines operated with neat dimethyl ether (DME). JSME TED Newsletter, 42, 1–14.
  • Kajitani, S. ve Chen, Z. (2003). Fundamental research on next generation fuel (dimethyl ether) engines. Journal of Scientific & Industrial Research, 62, 133–144.
  • Khunaphan, S., Hartley, U. W. ve Theinnoi, K. (2013). Characterization and potential of dimethyl ether (DME) as dual fuel combustion in a compression ignition engine. International Journal of Engineering Science and Innovative Technology, 2(3), 79–85.
  • Kim, H. J. ve Park, S. H. (2016). Optimization study on exhaust emissions and fuel consumption in a dimethyl ether (DME) fueled diesel engine. Fuel, 182, 541–549.
  • Kim, H. J., Park, S. H., Lee, K. S. ve Lee, C. S. (2011). A Study of spray strategies on improvement of engine performance and emissions reduction characteristics in a DME fueled diesel engine. Energy, 36, 1802–1813.
  • Kim, H. J., Park, S. W. ve Lee, C. S. (2012). Numerical and experimental study on the combustion and emission characteristics of a dimethyl ether (DME) fueled compression ignition engine. Oil & Gas Science and Technology, 67(3), 479–489.
  • Kowalewicz, A. ve Wojtyniak, M. (2005). Alternative fuels and their application to combustion engines. Journal of Automobile Engineering, 219, 103–125.
  • Kropiwnicki, J., Dominiczak, P. ve Kneba, Z. (2017). Analysis of the possibilities of using of DME fuel in motor boat drive systems. Combustion Engines, 171(4), 74–80.
  • Lamani, V. T., Yadav, A. K. ve Narayanappa, K. G. (2017). Influence of low–temperature combustion and dimethyl ether–diesel blends on performance, combustion, and emission characteristics of common rail diesel engine: A CFD study. Environmental Science and Pollution Research, 24, 15500–15509.
  • Lecksiwilai, N., Gheewala, S. H., Sagisaka, M. ve Yamaguchi, K. (2016). Net energy ratio and life cycle greenhouse gases (ghg) assessment of bio–dimethyl ether (DME) produced from various agricultural residues in Thailand. Journal of Cleaner Production, 134, 523–531.
  • Li, G. (2011). Dimethyl ether (DME): A new alternative fuel for diesel vehicle. Advanced Materials Research, 156–157, 1014–1018.
  • Lim, O. T. ve Iida, N. (2015). A Study on the spray and engine combustion characteristics of diesel–dimethyl ether fuel blends. Journal of Automobile Engineering, 229(6), 782–792.
  • Liu, J., Wang, L., Wang, P., Sun, P., Liu, H., Meng, Z., Zhang, L. ve Ma, H. (2022). An overview of polyoxymethylene dimethyl ethers as alternative fuel for compression ignition engines. Fuel, 318, 123582.
  • Loganathan, M., Anbarasu, A. ve Velmurugan, A. (2012). Emission characteristics of jatropha–ethanol and jatropha–dimethyl ether fuel blends on a DI diesel engine. Journal of Mechanical Engineering, 42(1), 38–46.
  • Loganathan, M., Anbarasu, A. ve Velmurugan, A. (2012). emission characteristics of jatropha–dimethyl ether fuel blends on a DI diesel engine. International Journal of Scientific & Technology Research, 1(8), 28–32.
  • Longbao, Z., Hewu, W. ve Ying, W. (2002). Experimental study on performances and combustion characteristics of DME powered vehicle. Conference on Better Air Quality in Asian and Pacific Rim Cities (BAQ 2002), 16–18 December 2002, Hong Kong, p. 1–6.
  • Maji, S., Ahmed, S., Siddiqui, W. A. ve Kumar, A. (2014). Impact of di–methyl ether (DME) as an additive fuel for compression ignition engine in reduction of urban air pollution. International Journal of Innovative Research in Science, Engineering and Technology, 3(11), 17221–17228.
  • Maji, S., Ahmed, S., Siddiqui, W. A., Aggarwal, S. ve Kumar, A. (2015). Impact of di–methyl ether (DME) as an additive fuel for compression ignition engine in reduction of urban air pollution. American Journal of Environmental Protection, 3(2), 48–52.
  • Mohan, B., Yang, W., Yu, W. ve Tay, K. L. (2017). Numerical analysis of spray characteristics of dimethyl ether and diethyl ether fuel. Applied Energy, 185, 1403–1410.
  • Namasivayam, A. M., Korakianitis, T., Crookes, R. J., Bob–Manuel, K. D. H. ve Olsen, J. (2010). Biodiesel, emulsified biodiesel and dimethyl ether as pilot fuels for natural gas fuelled engines. Applied Energy, 87, 769–778.
  • Oda, Y., Osafune, Y., Ueda, H. ve Fujimura, K. (2004). Clean combustion technology in diesel engines operated with dimethyl ether. Mitsubishi Heavy Industries Ltd. Technical Review, 40(6), 1–5.
  • Park, S. H. (2012). Optimization of combustion chamber geometry and engine operating conditions for compression ignition engines fueled with dimethyl ether. Fuel, 97, 61–71.
  • Park, S. H. ve Lee, C. S. (2013). Combustion performance and emission reduction characteristics of automotive DME engine system. Progress in Energy and Combustion Science, 39, 147–168.
  • Park, S. H. ve Lee, C. S. (2014). Applicability of dimethyl ether (DME) in a compression ignition engine as an alternative fuel. Energy Conversion and Management, 86, 848–863.
  • Park, S. H., Kim, H. J. ve Lee, C. S. (2010). Effects of dimethyl–ether (DME) spray behavior in the cylinder on the combustion and exhaust emissions characteristics of a high speed diesel engine. Fuel Processing Technology, 91, 504–513.
  • Park, S. H., Shin, D. ve Park, J. (2016). Effect of ethanol fraction on the combustion and emission characteristics of a dimethyl ether–ethanol dual–fuel reactivity controlled compression ignition engine. Applied Energy, 182, 243–252.
  • Park, S. H., Yoon, S. H., Cha, J. ve Lee, C. S. (2014). Mixing effects of biogas and dimethyl ether (DME) on combustion and emission characteristics of DME fueled high–speed diesel engine. Energy, 66, 413–422.
  • Patil, K. R. ve Thipse, S. S. (2012). The potential of DME–diesel blends as an alternative fuel for CI engines. International Journal of Emerging Technology and Advanced Engineering, 2(10), 35–41.
  • Prabhakaran, B., Thennarasu, P. ve Karthick, S. (2015). Performance and characteristics of a CI engine using DME (dimethyl ether). International Journal of Innovative Research in Science, Engineering and Technology, 4(2), 31–34.
  • Putrasari, Y., Jamsran, N. ve Lim, O. (2017). An investigation on the DME HCCI autoignition under EGR and boosted operation. Fuel, 200, 447–457.
  • Roh, H. G., Lee, D. ve Lee, C. S. (2015). Impact of DME–biodiesel, diesel–biodiesel and diesel fuels on the combustion and emission reduction characteristics of a CI engine according to pilot and single injection strategies. Journal of the Energy Institute, 88, 376–385.
  • Ryu, K., Zacharakis–Jutz, G. E. ve Kong, S.–C. (2014). Performance characteristics of compression–ignition engine using high concentration of ammonia mixed with dimethyl ether. Applied Energy, 113, 488–499.
  • Semelsberger, T. A., Borup, R. L. ve Grene, H. L. (2006). Dimethyl ether (DME) as an alternative fuel. Journal of Power Sources, 156, 497–511.
  • Sezer, I. (2011). Thermodynamic, performance and emission investigation of a diesel engine running on dimethyl ether and diethyl ether. International Journal of Thermal Sciences, 50, 1594–1603.
  • Smolec, R., Idzior, M., Karpiuk, W. ve Kozak, M. (2017). Assessment of the potential of dimethyl ether as an alternative fuel for compression ignition engines. Combustion Engines, 169(2), 181–186.
  • Song, J., Huang, Z., Qiao, X. ve Wang, W. (2004). Performance of a controllable premixed combustion engine fueled with dimethyl ether. Energy Conversion and Management, 45, 2223–2232.
  • Suh, H. K. ve Lee, C. S. (2008). Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common–rail injection system in a diesel engine. Fuel, 87, 925–932.
  • Taghavifar, H., Khalilarya, S., Mirhasani, S. ve Jafarmadar, S. (2014). Numerical energetic and exergetic analysis of CI diesel engine performance for different fuels of hydrogen, dimethyl ether, and diesel under various engine speeds. International Journal of Hydrogen Energy, 39, 9515–9526.
  • Teng, H., McCandless, J. C. ve Scheneyer Jeffrey, B. (2001). Thermochemical characteristics of dimethyl ether alternative fuel for compression–ignition. Society of Automotive Engineers, Paper no 2001–01–0154.
  • Theinnoi, K., Suksompong, P. ve Temwutthikun, W. (2017). Engine performance of dual fuel operation with in–cylinder injected diesel fuels and in–port injected DME. Energy Procedia, 142, 461–467.
  • Thomas, G., Feng, B., Veeraragavan, A., Cleary, M. J. ve Drinnan, N. (2014). Emissions from DME combustion in diesel engines and their implications on meeting future emission norms: A review. Fuel Processing Technology, 119, 286–304.
  • Tong, L., Wang, H., Zheng, Z., Reitz, R. ve Yao, M. (2016). Experimental study of RCCI combustion and load extension in a compression ignition engine fueled with gasoline and PODE. Fuel, 181, 878–886.
  • Xinling, L. ve Zhen, H. (2009). Emission reduction potential of using gas–to–liquid and dimethyl ether fuels on a turbocharged diesel engine. Science of the Total Environment, 407, 2234–2244.
  • Xu, S., Wang, Y., Zhang, X., Zhen, X. ve Tao, C. (2012). Development of a novel common–rail type dimethyl ether (DME) injector. Applied Energy, 94, 1–12.
  • Vispute, K. M. ve Pawar, T. J. (2016). Study and prospects of di–methyl ether as an alternative fuel in C.I. engine: Review. International Journal of Trend in Research and Development, 3(4), 134–138.
  • Wang, H. W., Zhou, L. B., Jiang, D. M. ve Huang, Z. H. (2000). Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether. Journal of Automotive Engineering, 214, 101–106.
  • Wang, Y., Xiao, F., Zhao, Y., Li, D. ve Lei, X. (2015). Study on cycle–by–cycle variations in a diesel engine with dimethyl ether as port premixing fuel. Applied Energy, 143, 58–70.
  • Wang, Y., Zhao, Y. ve Yang, Z. (2013). Dimethyl ether energy ratio effects in a dimethyl ether–diesel dual fuel premixed charge compression ignition engine. Applied Thermal Engineering, 54, 481–487.
  • Wang, Y., Zhao, Y., Xiao, F. ve Li, D. (2014). Combustion and emission characteristics of a diesel engine with DME as port premixing fuel under different injection timing. Energy Conversion and Management, 77, 52–60.
  • Wang, Z., Liu, H., Ma, X., Wang, J., Shuai, S. ve Reitz, R. D. (2016). Homogeneous charge compression ignition (HCCI) combustion of polyoxymethylene dimethyl ethers (PODE). Fuel, 183, 206–213.
  • Wattanavichien, K. (2009). Implementation of DME in a small direct injection diesel engine. International Journal of Renewable Energy, 4(2), 1–12.
  • Yanju, W., Kun, W., Wenrui, W., Shenghua, L., Xiao, C., Yajing, Y. ve Shanwen, B. (2014). Comparison study on the emission characteristics of diesel– and dimethyl ether–originated particulate matters. Applied Energy, 130, 357–369.
  • Ying, W., Li, H., Longbao, Z. ve Wei, L. (2010). Effects of DME pilot quantity on the performance of a DME PCCI–DI engine. Energy Conversion and Management, 51, 648–654.
  • Ying, W., Longbao, Z. ve Hewu, W. (2006). Diesel emission improvements by the use of oxygenated DME/diesel blend fuels. Atmospheric Environment, 40, 2313–2320.
  • Ying, W., Longbao, Z., Zhongji, Y. ve Hongyi, D. (2005). Study on combustion and emission characteristics of a vehicle engine fuelled dimethyl ether. Journal of Automotive Engineering, 219, 263–269.
  • Yoon, S. H., Cha, J. P. ve Lee, C. S. (2010). An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combustion and exhaust emission characteristics in a common–rail diesel engine. Fuel Processing Technology, 9, 1364–1372.
  • Yoon, S. H., Han, S. C. ve Lee, C. S. (2013). Effects of high EGR rate on dimethyl ether (DME) combustion and pollutant emission characteristics in a direct injection diesel engine. Energies, 6, 5157–5167.
  • Youn, I. M., Park, S. H., Roh, H. G. ve Lee, C. S. (2011). Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi–cylinder diesel engine with common–rail injection system. Fuel Processing Technology, 92, 1280–1287.
  • Zhao, Y., Wang, Y., Li, D., Lei, X. ve Liu, S. (2014). Combustion and emission characteristics of a DME (dimethyl ether)–diesel dual fuel premixed charge compression ignition engine with EGR (exhaust gas recirculation). Energy, 72, 608–617.
  • Zhu, Z., Li, D. K., Liu, J., Wei, Y. J. ve Liu, S. H. (2012). Investigation on the regulated and unregulated emissions of a DME engine under different injection timing. Applied Thermal Engineering, 35, 9–14.

Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme

Year 2023, Volume: 13 Issue: 2, 1212 - 1229, 01.06.2023

İsmet Sezer

https://doi.org/10.21597/jist.1117505

Abstract

Bu çalışma, dizel motorlarda dimetil eter (DME)’in saf veya yakıt katkısı olarak kullanımı üzerine yapılmış çeşitli çalışmaların sonuçlarından yararlanılarak derlenmiştir. Dizel motorlarda zararlı egzoz emisyonlarını azaltmanın birkaç yöntemi vardır. Bunlardan ilki motor tasarımında ve yakıt enjeksiyon sisteminde modifikasyonlar yaparak yanmanın iyileştirilmesidir, ancak bu pahalı ve zaman alıcı bir yöntemdir. İkinci yöntem ise katalitik konvertör ve partikül fitresi gibi donanımlar kullanmaktır, ancak bu donanımlar motor performansını olumsuz yönde etkiler. Hem egzoz emisyonlarını azaltmak hem de motor performansını artırmak için uygulanan son yöntem çeşitli alternatif yakıtların veya yakıt katkılarının kullanılmasıdır. Dizel motorlardaki en önemli emisyonlar azot oksitler (NOx) ve partikül madde (PM) emisyonlarıdır. Çoğu araştırmacı emisyonları azaltmanın en iyi yolunun doğalgaz, biyogaz, biyodizel gibi alternatif yakıtların veya konvansiyonel veya alternatif yakıtlarla birlikte çeşitli yakıt katkılarının kullanılması olduğunu bildirmektedir. Bu nedenle, alternatif yakıtlar ve yakıt katkıları üzerine yapılan çalışmaların sonuçlarının birlikte değerlendirilmesi pratik uygulamalar için oldukça önemlidir. Bu çalışma, dimetil eterin dizel motorlarda yakıt veya yakıt katkısı olarak kullanılmasının PM emisyonları üzerindeki etkilerinin incelenmesine odaklanmıştır. Yapılan derleme çalışması sonucunda; DME saf olarak kullanıldığında yüksek oksijen içeriği, kimyasal yapısında direkt bağlı karbon bulunmaması, hızlı buharlaşma, yüksek setan sayısı ve düşük tutuşma sıcaklığı gibi özellikleri sayesinde sıfıra yakın PM emisyonu elde edilmesini sağladığı belirlenmiştir. Saf DME’nin dizel yakıtına kıyasla PM emisyonunu %13–228 ve biyodizel yakıtına kıyasla %88.6–227.6 azalttığı tespit edilmiştir. Ayrıca, farklı oranlarda DME içeren dizel–DME karışımlarının dizel yakıtına kıyasla PM emisyonunu %4.7–509 azalttığı ve farklı oranlarda DME içeren biyodizel–DME karışımlarının PM emisyonunu biyodizel yakıtına kıyasla %38.2 azalttığı tespit edilmiştir. Diğer taraftan, LPG–DME karışımının dizel yakıtına kıyasla PM emisyonunu %269–493 azalttığı ve farklı oranlarda DME içeren DME–NH3 karışımlarının saf DME’ye kıyasla PM emisyonunu %40.7–96.7 artırdığı tespit edilmiştir. Öte yandan, egzoz gazı resirkülasyonu (EGR) oranının %10–50 aralığında değiştirilmesinin PM emisyonunu %13.1–48.4 artırdığı tespit edilmiştir.

Keywords

Dizel motor Dimetil eter Motor performansı Yakıt katkıları PM emisyonları

References

  • Abhishek, Rahul, K., Santosh, K. ve Martha, O. (2017). Blending impacts of biogas and dimethyl ether (DME) on compressed ignition engine. International Research Journal of Engineering and Technology, 4(4), 2174–2177.
  • Alam, M. ve Kajitani, S. (2001). DME as an alternative fuel for direct injection diesel engine. 4th International Conference on Mechanical Engineering, December 26–28, Dhaka., Bangladesh, pp. 87–92.
  • Ambekar, Y. ve Hole, J. A. (2018). Preliminary optimization of duel fuel engine using dimethyl ether premixed combustion. International Research Journal of Engineering and Technology, 5(10), 274–278.
  • Arcoumanis, C., Bae, C., Crookes, R. ve Kinoshita, E. (2008). The potential of di–methyl ether (DME) as an alternative fuel for compression–ignition engines: A review. Fuel, 87(7), 1014–1030.
  • Azizi, Z., Rezaeimanesh, M., Tohidian, T. ve Rahimpour, M. R. (2014). Dimethyl ether: A review of technologies and production challenges. Chemical Engineering and Processing, 82, 150–172.
  • Barro, C., Parravicinia, M. ve Boulouchos, K. (2019). Neat polyoxymethylene dimethyl ether in a diesel engine; part 1: Detailed combustion analysis. Fuel, 256: 115892.
  • Baskaran, R. (2015). Analysis on synthesis, storage & combustion characteristics of DME as fuel in CI engines. International Journal for Research in Applied Science & Engineering Technology, 3(1), 133–140.
  • Benajes, J., Novella, R., Pastor, J. M., Hernández–López, A. ve Kokjohn, S. L. (2018). Computational optimization of the combustion system of a heavy duty direct injection diesel engine operating with dimethyl–ether. Fuel, 218, 127–139.
  • Benajes, J., Novella, R., Pastor, J. M., Hernández–López, A. ve Kokjohn S. L. (2018). Computational optimization of a combustion system for a stoichiometric DME fueled compression ignition engine. Fuel, 223, 20–31.
  • Bogdan, J., Nicolae, B., Călin, I. ve Vlad, B. N. (2017). Study of emissions for a compression ignition engine fueled with a mix of DME and diesel. Materials Science and Engineering, 252, 1–9.
  • Chapman, E. M. ve Boehman, A. L. (2008). Pilot ignited premixed combustion of dimethyl ether in a turbodiesel engine. Fuel Processing Technology, 89, 1262–1271.
  • Chen, Z., Konno, M. ve Kajitani, S. (2000). Performance and emissions of DI compression ignition engines fueled with dimethyl ether. JSME International Journal, 43(1), 82–88.
  • Deepak, K. M., Karthick, M,, Dineshbabu, D., Srikanth, P. ve Ramachandran, M. G. (2015). Investigation on the effect of dimethyl ether in compression ignition engine. International Journal of Innovative Research in Science, Engineering and Technology, 4(2), 401–407.
  • Duan, J., Sun, Y., Yang, Z. ve Sun, Z. (2012). Combustion and emissions characteristics of diesel engine operating on composite combustion mode of DME and diesel. Proceedings of International Conference on Mechanical Engineering and Material Science, Shanghai, China, pp. 463–466.
  • El–Hagar, M. M. E.–G. (2014). Effect of diethyl ether and dimethyl ether with liquefied petroleum gas on combustion and emissions characteristics of diesel engine. International Journal of Computer Science and Engineering, 2(3), 193–198.
  • García, A., Gil, A., Monsalve–Serrano, J. ve Sari, R. L. (2020). OMEx–diesel blends as high reactivity fuel for ultra–low NOx and soot emissions in the dual–mode dual–fuel combustion strategy. Fuel, 275, 117898.
  • Genbao, L., Jianming, C., Minglong, L., Yuhua, Q. ve Zhaoyang, C. (2012). Experimental study on the size distribution characteristics of spray droplets of DME/diesel blended fuels. Fuel Processing Technology, 104, 352–355.
  • Geng, P., Cao, E., Tan, Q. ve Wie, L. (2017). Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review. Renewable and Sustainable Energy Reviews, 71, 523–534.
  • Guangxin, G., Zhulin, Y., Apeng, Z., Shenghua, L. ve Yanju, W. (2013). Effects of fuel temperature on injection process and combustion of dimethyl ether engine. Journal of Energy Resources Technology, 135, 1–5.
  • Hewu, W. ve Longbao, Z. (2017). Performance of a direct injection diesel engine fuelled with a dimethyl ether/diesel blend. Journal of Automobile Engineering, 217(9), 819–824.
  • Hou, J., Wen, Z., Jiang, Z. ve Qiao, X. (2014). Study on combustion and emissions of a turbocharged compression ignition engine fueled with dimethyl ether and biodiesel blends. Journal of the Energy Institute, 87, 102–113.
  • Huang, Z., Qiao, X., Zhang, W., Wu, J. ve Zhang, J. (2009). Dimethyl ether as alternative fuel for CI engine and vehicle. Frontiers of Energy and Power Engineering in China, 3(1), 99–108.
  • Inayat, A., Ghenai, C., Naqvi, M., Ammar, M., Ayoub, M. ve Hussin, M. N. B. (2017). Parametric study for production of dimethyl ether (DME) as a fuel from palm wastes. Energy Procedia, 105, 1242–1249.
  • Jalanapurkar, M., Patel, K., Patel, T., Rathod, G. ve Granipa, H. (2015). A literature review on combine effect of di–methyl ether (DME) as an additive & the injection pressure on the performance & emission of 4 stroke C.I. engine. International Journal of Advance Engineering and Research Development, 2(1), 262–266.
  • Jang, J. ve Bae, C. (2009). Effects of valve events on the engine efficiency in a homogeneous charge compression ignition engine fueled by dimethyl ether. Fuel, 88, 1228–1234.
  • Jeon, J., Kwon, S., Park, Y. H., Oh, Y. ve Park, S. (2014). Visualizations of combustion and fuel/air mixture formation processes in a single cylinder engine fueled with DME. Applied Energy, 113, 294–301.
  • Kajitani, S. (2004). A study of low compression ratio diesel engines operated with neat dimethyl ether (DME). JSME TED Newsletter, 42, 1–14.
  • Kajitani, S. ve Chen, Z. (2003). Fundamental research on next generation fuel (dimethyl ether) engines. Journal of Scientific & Industrial Research, 62, 133–144.
  • Khunaphan, S., Hartley, U. W. ve Theinnoi, K. (2013). Characterization and potential of dimethyl ether (DME) as dual fuel combustion in a compression ignition engine. International Journal of Engineering Science and Innovative Technology, 2(3), 79–85.
  • Kim, H. J. ve Park, S. H. (2016). Optimization study on exhaust emissions and fuel consumption in a dimethyl ether (DME) fueled diesel engine. Fuel, 182, 541–549.
  • Kim, H. J., Park, S. H., Lee, K. S. ve Lee, C. S. (2011). A Study of spray strategies on improvement of engine performance and emissions reduction characteristics in a DME fueled diesel engine. Energy, 36, 1802–1813.
  • Kim, H. J., Park, S. W. ve Lee, C. S. (2012). Numerical and experimental study on the combustion and emission characteristics of a dimethyl ether (DME) fueled compression ignition engine. Oil & Gas Science and Technology, 67(3), 479–489.
  • Kowalewicz, A. ve Wojtyniak, M. (2005). Alternative fuels and their application to combustion engines. Journal of Automobile Engineering, 219, 103–125.
  • Kropiwnicki, J., Dominiczak, P. ve Kneba, Z. (2017). Analysis of the possibilities of using of DME fuel in motor boat drive systems. Combustion Engines, 171(4), 74–80.
  • Lamani, V. T., Yadav, A. K. ve Narayanappa, K. G. (2017). Influence of low–temperature combustion and dimethyl ether–diesel blends on performance, combustion, and emission characteristics of common rail diesel engine: A CFD study. Environmental Science and Pollution Research, 24, 15500–15509.
  • Lecksiwilai, N., Gheewala, S. H., Sagisaka, M. ve Yamaguchi, K. (2016). Net energy ratio and life cycle greenhouse gases (ghg) assessment of bio–dimethyl ether (DME) produced from various agricultural residues in Thailand. Journal of Cleaner Production, 134, 523–531.
  • Li, G. (2011). Dimethyl ether (DME): A new alternative fuel for diesel vehicle. Advanced Materials Research, 156–157, 1014–1018.
  • Lim, O. T. ve Iida, N. (2015). A Study on the spray and engine combustion characteristics of diesel–dimethyl ether fuel blends. Journal of Automobile Engineering, 229(6), 782–792.
  • Liu, J., Wang, L., Wang, P., Sun, P., Liu, H., Meng, Z., Zhang, L. ve Ma, H. (2022). An overview of polyoxymethylene dimethyl ethers as alternative fuel for compression ignition engines. Fuel, 318, 123582.
  • Loganathan, M., Anbarasu, A. ve Velmurugan, A. (2012). Emission characteristics of jatropha–ethanol and jatropha–dimethyl ether fuel blends on a DI diesel engine. Journal of Mechanical Engineering, 42(1), 38–46.
  • Loganathan, M., Anbarasu, A. ve Velmurugan, A. (2012). emission characteristics of jatropha–dimethyl ether fuel blends on a DI diesel engine. International Journal of Scientific & Technology Research, 1(8), 28–32.
  • Longbao, Z., Hewu, W. ve Ying, W. (2002). Experimental study on performances and combustion characteristics of DME powered vehicle. Conference on Better Air Quality in Asian and Pacific Rim Cities (BAQ 2002), 16–18 December 2002, Hong Kong, p. 1–6.
  • Maji, S., Ahmed, S., Siddiqui, W. A. ve Kumar, A. (2014). Impact of di–methyl ether (DME) as an additive fuel for compression ignition engine in reduction of urban air pollution. International Journal of Innovative Research in Science, Engineering and Technology, 3(11), 17221–17228.
  • Maji, S., Ahmed, S., Siddiqui, W. A., Aggarwal, S. ve Kumar, A. (2015). Impact of di–methyl ether (DME) as an additive fuel for compression ignition engine in reduction of urban air pollution. American Journal of Environmental Protection, 3(2), 48–52.
  • Mohan, B., Yang, W., Yu, W. ve Tay, K. L. (2017). Numerical analysis of spray characteristics of dimethyl ether and diethyl ether fuel. Applied Energy, 185, 1403–1410.
  • Namasivayam, A. M., Korakianitis, T., Crookes, R. J., Bob–Manuel, K. D. H. ve Olsen, J. (2010). Biodiesel, emulsified biodiesel and dimethyl ether as pilot fuels for natural gas fuelled engines. Applied Energy, 87, 769–778.
  • Oda, Y., Osafune, Y., Ueda, H. ve Fujimura, K. (2004). Clean combustion technology in diesel engines operated with dimethyl ether. Mitsubishi Heavy Industries Ltd. Technical Review, 40(6), 1–5.
  • Park, S. H. (2012). Optimization of combustion chamber geometry and engine operating conditions for compression ignition engines fueled with dimethyl ether. Fuel, 97, 61–71.
  • Park, S. H. ve Lee, C. S. (2013). Combustion performance and emission reduction characteristics of automotive DME engine system. Progress in Energy and Combustion Science, 39, 147–168.
  • Park, S. H. ve Lee, C. S. (2014). Applicability of dimethyl ether (DME) in a compression ignition engine as an alternative fuel. Energy Conversion and Management, 86, 848–863.
  • Park, S. H., Kim, H. J. ve Lee, C. S. (2010). Effects of dimethyl–ether (DME) spray behavior in the cylinder on the combustion and exhaust emissions characteristics of a high speed diesel engine. Fuel Processing Technology, 91, 504–513.
  • Park, S. H., Shin, D. ve Park, J. (2016). Effect of ethanol fraction on the combustion and emission characteristics of a dimethyl ether–ethanol dual–fuel reactivity controlled compression ignition engine. Applied Energy, 182, 243–252.
  • Park, S. H., Yoon, S. H., Cha, J. ve Lee, C. S. (2014). Mixing effects of biogas and dimethyl ether (DME) on combustion and emission characteristics of DME fueled high–speed diesel engine. Energy, 66, 413–422.
  • Patil, K. R. ve Thipse, S. S. (2012). The potential of DME–diesel blends as an alternative fuel for CI engines. International Journal of Emerging Technology and Advanced Engineering, 2(10), 35–41.
  • Prabhakaran, B., Thennarasu, P. ve Karthick, S. (2015). Performance and characteristics of a CI engine using DME (dimethyl ether). International Journal of Innovative Research in Science, Engineering and Technology, 4(2), 31–34.
  • Putrasari, Y., Jamsran, N. ve Lim, O. (2017). An investigation on the DME HCCI autoignition under EGR and boosted operation. Fuel, 200, 447–457.
  • Roh, H. G., Lee, D. ve Lee, C. S. (2015). Impact of DME–biodiesel, diesel–biodiesel and diesel fuels on the combustion and emission reduction characteristics of a CI engine according to pilot and single injection strategies. Journal of the Energy Institute, 88, 376–385.
  • Ryu, K., Zacharakis–Jutz, G. E. ve Kong, S.–C. (2014). Performance characteristics of compression–ignition engine using high concentration of ammonia mixed with dimethyl ether. Applied Energy, 113, 488–499.
  • Semelsberger, T. A., Borup, R. L. ve Grene, H. L. (2006). Dimethyl ether (DME) as an alternative fuel. Journal of Power Sources, 156, 497–511.
  • Sezer, I. (2011). Thermodynamic, performance and emission investigation of a diesel engine running on dimethyl ether and diethyl ether. International Journal of Thermal Sciences, 50, 1594–1603.
  • Smolec, R., Idzior, M., Karpiuk, W. ve Kozak, M. (2017). Assessment of the potential of dimethyl ether as an alternative fuel for compression ignition engines. Combustion Engines, 169(2), 181–186.
  • Song, J., Huang, Z., Qiao, X. ve Wang, W. (2004). Performance of a controllable premixed combustion engine fueled with dimethyl ether. Energy Conversion and Management, 45, 2223–2232.
  • Suh, H. K. ve Lee, C. S. (2008). Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common–rail injection system in a diesel engine. Fuel, 87, 925–932.
  • Taghavifar, H., Khalilarya, S., Mirhasani, S. ve Jafarmadar, S. (2014). Numerical energetic and exergetic analysis of CI diesel engine performance for different fuels of hydrogen, dimethyl ether, and diesel under various engine speeds. International Journal of Hydrogen Energy, 39, 9515–9526.
  • Teng, H., McCandless, J. C. ve Scheneyer Jeffrey, B. (2001). Thermochemical characteristics of dimethyl ether alternative fuel for compression–ignition. Society of Automotive Engineers, Paper no 2001–01–0154.
  • Theinnoi, K., Suksompong, P. ve Temwutthikun, W. (2017). Engine performance of dual fuel operation with in–cylinder injected diesel fuels and in–port injected DME. Energy Procedia, 142, 461–467.
  • Thomas, G., Feng, B., Veeraragavan, A., Cleary, M. J. ve Drinnan, N. (2014). Emissions from DME combustion in diesel engines and their implications on meeting future emission norms: A review. Fuel Processing Technology, 119, 286–304.
  • Tong, L., Wang, H., Zheng, Z., Reitz, R. ve Yao, M. (2016). Experimental study of RCCI combustion and load extension in a compression ignition engine fueled with gasoline and PODE. Fuel, 181, 878–886.
  • Xinling, L. ve Zhen, H. (2009). Emission reduction potential of using gas–to–liquid and dimethyl ether fuels on a turbocharged diesel engine. Science of the Total Environment, 407, 2234–2244.
  • Xu, S., Wang, Y., Zhang, X., Zhen, X. ve Tao, C. (2012). Development of a novel common–rail type dimethyl ether (DME) injector. Applied Energy, 94, 1–12.
  • Vispute, K. M. ve Pawar, T. J. (2016). Study and prospects of di–methyl ether as an alternative fuel in C.I. engine: Review. International Journal of Trend in Research and Development, 3(4), 134–138.
  • Wang, H. W., Zhou, L. B., Jiang, D. M. ve Huang, Z. H. (2000). Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether. Journal of Automotive Engineering, 214, 101–106.
  • Wang, Y., Xiao, F., Zhao, Y., Li, D. ve Lei, X. (2015). Study on cycle–by–cycle variations in a diesel engine with dimethyl ether as port premixing fuel. Applied Energy, 143, 58–70.
  • Wang, Y., Zhao, Y. ve Yang, Z. (2013). Dimethyl ether energy ratio effects in a dimethyl ether–diesel dual fuel premixed charge compression ignition engine. Applied Thermal Engineering, 54, 481–487.
  • Wang, Y., Zhao, Y., Xiao, F. ve Li, D. (2014). Combustion and emission characteristics of a diesel engine with DME as port premixing fuel under different injection timing. Energy Conversion and Management, 77, 52–60.
  • Wang, Z., Liu, H., Ma, X., Wang, J., Shuai, S. ve Reitz, R. D. (2016). Homogeneous charge compression ignition (HCCI) combustion of polyoxymethylene dimethyl ethers (PODE). Fuel, 183, 206–213.
  • Wattanavichien, K. (2009). Implementation of DME in a small direct injection diesel engine. International Journal of Renewable Energy, 4(2), 1–12.
  • Yanju, W., Kun, W., Wenrui, W., Shenghua, L., Xiao, C., Yajing, Y. ve Shanwen, B. (2014). Comparison study on the emission characteristics of diesel– and dimethyl ether–originated particulate matters. Applied Energy, 130, 357–369.
  • Ying, W., Li, H., Longbao, Z. ve Wei, L. (2010). Effects of DME pilot quantity on the performance of a DME PCCI–DI engine. Energy Conversion and Management, 51, 648–654.
  • Ying, W., Longbao, Z. ve Hewu, W. (2006). Diesel emission improvements by the use of oxygenated DME/diesel blend fuels. Atmospheric Environment, 40, 2313–2320.
  • Ying, W., Longbao, Z., Zhongji, Y. ve Hongyi, D. (2005). Study on combustion and emission characteristics of a vehicle engine fuelled dimethyl ether. Journal of Automotive Engineering, 219, 263–269.
  • Yoon, S. H., Cha, J. P. ve Lee, C. S. (2010). An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combustion and exhaust emission characteristics in a common–rail diesel engine. Fuel Processing Technology, 9, 1364–1372.
  • Yoon, S. H., Han, S. C. ve Lee, C. S. (2013). Effects of high EGR rate on dimethyl ether (DME) combustion and pollutant emission characteristics in a direct injection diesel engine. Energies, 6, 5157–5167.
  • Youn, I. M., Park, S. H., Roh, H. G. ve Lee, C. S. (2011). Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi–cylinder diesel engine with common–rail injection system. Fuel Processing Technology, 92, 1280–1287.
  • Zhao, Y., Wang, Y., Li, D., Lei, X. ve Liu, S. (2014). Combustion and emission characteristics of a DME (dimethyl ether)–diesel dual fuel premixed charge compression ignition engine with EGR (exhaust gas recirculation). Energy, 72, 608–617.
  • Zhu, Z., Li, D. K., Liu, J., Wei, Y. J. ve Liu, S. H. (2012). Investigation on the regulated and unregulated emissions of a DME engine under different injection timing. Applied Thermal Engineering, 35, 9–14.
There are 86 citations in total.

Details

Primary Language Turkish
Subjects Mechanical Engineering
Journal Section Makina Mühendisliği / Mechanical Engineering
Authors

İsmet Sezer 0000-0001-7342-9172

Early Pub Date May 27, 2023
Publication Date June 1, 2023
Submission Date May 16, 2022
Acceptance Date February 27, 2023
Published in Issue Year 2023 Volume: 13 Issue: 2

Cite

APA Sezer, İ. (2023). Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme. Journal of the Institute of Science and Technology, 13(2), 1212-1229. https://doi.org/10.21597/jist.1117505
AMA Sezer İ. Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme. J. Inst. Sci. and Tech. June 2023;13(2):1212-1229. doi:10.21597/jist.1117505
Chicago Sezer, İsmet. “Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme”. Journal of the Institute of Science and Technology 13, no. 2 (June 2023): 1212-29. https://doi.org/10.21597/jist.1117505.
EndNote Sezer İ (June 1, 2023) Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme. Journal of the Institute of Science and Technology 13 2 1212–1229.
IEEE İ. Sezer, “Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme”, J. Inst. Sci. and Tech., vol. 13, no. 2, pp. 1212–1229, 2023, doi: 10.21597/jist.1117505.
ISNAD Sezer, İsmet. “Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme”. Journal of the Institute of Science and Technology 13/2 (June 2023), 1212-1229. https://doi.org/10.21597/jist.1117505.
JAMA Sezer İ. Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme. J. Inst. Sci. and Tech. 2023;13:1212–1229.
MLA Sezer, İsmet. “Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme”. Journal of the Institute of Science and Technology, vol. 13, no. 2, 2023, pp. 1212-29, doi:10.21597/jist.1117505.
Vancouver Sezer İ. Dizel Motorlarda Dimetil Eter Kullanımının Partikül Madde Emisyonlarına Etkileri Üzerine Bir Derleme. J. Inst. Sci. and Tech. 2023;13(2):1212-29.
 Download Cover Image