Abstract
Purpose: Aim of this study was to evaluate the effect different application methods of total-etch adhesives containing different solvents on microtensile bond strength to dentin.Material and Methods: Teeth were randomly divided into three groups according to adhesive systems and solvent type; each group was divided into two subgroups according to application method (n=10). Total-etch adhesives were applied with or without rubbing action and light cured. After bonding procedures resin composites were bonded and light cured. Specimens were subjected to thermocycle then microtensile force and obtained data were analyzed statistically.Results: Rubbing action significantly improved bond strength to dentin (p<0,001). Tertiary butanol containing adhesive showed highest bond strength values with or without rubbing action (p<0,05).Conclusion: Regardless of the adhesive system, rubbing of adhesive resins to dentin surface could increase bond strengths. Due to their high performances, adhesives containing tertiary butanol as solvent could be suggested.
Keywords
References
- Buonocore MG. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res, 1955; 34(6): 849-53. Gwinnett AJ, Matsui A. A study of enamel adhesives. The physical relationship between enamel and adhesive. Arch Oral Biol, 1967; 12(12): 1615–20. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent, 2003; 28(3): 215-35. Hebling, J, Pashley DH, Tjäderhane L, Tay FR. Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. J Dent Res, 2005; 84(8): 741-46. Pashley DH, Tay FR, Yiu C, Hashimoto M, Breschi L, Carvalho RM, Ito S. Collagen degradation by host-derived enzymes during aging. J Dent Res, 2004; 83(3): 216-21. De Munck J, Van den Steen PE, Mine A, Van Landuyt KL, Poitevin A, Opdenakker G, Van Meerbeek B. Inhibition of enzymatic degradation of adhesive–dentin interfaces. J Dent Res, 2009; 88(12): 1101-06. Swift EJ Jr, Bayne SC. Shear bond strength of a new one-bottle dentin adhesive. Am J Dent, 1997; 10(4): 184-88. Kanca J 3rd. Resin bonding to wet substrate. 1. Bonding to dentin. Quintessence Int, 1992; 23(1): 39-41. Reis A, Loguercio AD, Azevedo CL, de Carvalho RM, da Julio Singer M, Grande RH. Moisture spectrum of demineralized dentin for adhesive systems with different solvent bases. J Adhes Dent, 2003; 5(3): 183 (Çevrimiçi) http://www.psycho.uniduesseldorf.de/abteilungen/aap/gpower3, Erişim Tarihi: 10 Nisan 2013. Van Noort R, Noroozi S, Howard IC, Cardew G. A critique of bond strength measurements. J Dent, 1989; 117: 61–67. Van Noort R, Cardew GE, Howard
- IC, Noroozi S. The effect of local interfacial geometry on the measurement of thetensile bond strength to dentin. J Dent Res, 1991; 70: 889-93. DeHoff PH, Anusavice KJ, Wang Z.
- Three-dimensional finite element analysis of the shear bond test. Dent Mater, 1995; 11: 126–31. Versluis A, Tantbirojn D, Douglas
- WH. Why do shear bond tests pull out dentin? J Dent Res, 1997; 76: 1298–307. Placido E, Meira JB, Lima RG, Muench A, de Souza RM, Ballester RY. Shear versus micro-shear bond strength test: a finite element stress analysis. Dent Mater, 2007; 23: 1086-92. Ghassemieh E. Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries. Dent Mater, 2008; 24: 536- Scherrer SS, Cesar PF, Swain MV. Direct comparison of the bond strength results of the different test methods: a critical literature review. Dent Mater, 2010; 26: e78-93. Maciel KT, Carvalho RM, Ringle RD, Preston CD, Russell CM, Pashley DH. The effects of acetone, ethanol, HEMA, and air on the stiffness of human decalcified dentin matrix. J Dent Res, 1996; 11: 1851-58. Pashley DH, Agee KA, Nakajima M, Tay FR, Carvalho RM, Terada RS. Solventinduced dimensional changes in EDTA- de10
- J Dent, 1998; 11(5): 225-28. Van Landuyt KL, Peumans M, De
- Munck J, Lambrechts P, Van Meerbeek B. Extension of a one-step self-etch adhesive into a multi- step adhesive. Dent Mater, 2006; 22(6): 533-44. Van Meerbeek B, Van Landuyt K, De Munck J, Inoue S, Yoshida Y, Perdigao
- J. Bonding to enamel and dentin. In: Summit JB, Robbins JW, Hilton TJ, Schwarz RZ, editors. Fundamentals of operative dentistry. Berlin: Quintessence Publishing, 2006, p.183-260. Blunck U, Knitter K, Jahn KR. Sixmonth clinical evaluation of XP Bond in noncarious cervical lesions. J Adhes Dent, 2007; 9(2): 265-68. Ritter AV, Heymann HO, Swift EJ, Perdigäo J, Rosa BT. Effects of different re-wetting techniques on dentin shear bond strengths. J Esthet Dent, 2000; 12(2): 85-96. Orellana N, Ramírez R, Roig M, Giner L, Mercade M, Durán F, Herrera G.
- Comperative study of the microtensile bond strength of three different total etch adhesives with different solvents to wet and dry dentin(in vitro test). Acta Odontol Latinoam, 2009; 22(1): 47-56. Hegde MN, Manjunath J. Bond strength of newer dentin bonding agents in different clinical situations. Oper Dent, 2011; 36(2): 169-76. Kanca J 3rd. Improving bond strength through acid etching of dentin and bonding to wet dentin surfaces. J Am Dent Assoc, 1992; 123(9): 35-43.
FARKLI ÇÖZÜCÜ İÇEREN TOTAL-ETCH ADEZİFLERİN FARKLI UYGULAMA YÖNTEMLERİNİN BAĞLANMA DAYANIMINA ETKİSİ
Abstract
Amaç: Farklı çözücü (aseton, etanol ve tersiyer butanol) içeren total-etch ve self-etch adeziflerin
iki farklı uygulama yönteminin derin dentinde mikrogerilim bağlanma dayanımı üzerine etkisinin
değerlendirilmesi amaçlanmıştır.
Gereç ve Yöntem: Dişler çözücü tipi ve adezif sisteme göre 20’şerli rastgele 3 ana gruba; her ana
grup da uygulama yöntemine göre kendi içinde 2 alt gruba bölündü (n=10). Total-etch adezifler dentin
yüzeyine fırçayla ovalanarak veya ovalanmadan uygulanıp polimerize edildi. Örneklere kompozit
adezifler bağlanıp, termal siklusa uygulandıktan sonra mikrogerilim kuvvetine maruz bırakıldı. Veriler
istatistiksel olarak değerlendirildi.
Bulgular: Tüm adezifler için fırçayla ovalama uygulamasının bağlanma dayanıklılığını istatistiksel
olarak da anlamlı miktarda arttırdığı görüldü (p < 0.001). Tersiyer butanol içeren total etch adezif ovalanarak
ya da ovalanmadan uygulandığında en yüksek bağlanma dayanıklılığı değerlerine sahip oldu.
Sonuç: Adezif sistemden bağımsız olarak adeziflerin dentin yüzeyine ovalanarak uygulanması sonucu
bağlanma dayanıklılığı değerlerini arttırabilir. Çözücü olarak tersiyer butanol içeren adezifler yüksek
performansları nedeniyle önerilebilir.
Keywords
References
- Buonocore MG. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res, 1955; 34(6): 849-53. Gwinnett AJ, Matsui A. A study of enamel adhesives. The physical relationship between enamel and adhesive. Arch Oral Biol, 1967; 12(12): 1615–20. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent, 2003; 28(3): 215-35. Hebling, J, Pashley DH, Tjäderhane L, Tay FR. Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. J Dent Res, 2005; 84(8): 741-46. Pashley DH, Tay FR, Yiu C, Hashimoto M, Breschi L, Carvalho RM, Ito S. Collagen degradation by host-derived enzymes during aging. J Dent Res, 2004; 83(3): 216-21. De Munck J, Van den Steen PE, Mine A, Van Landuyt KL, Poitevin A, Opdenakker G, Van Meerbeek B. Inhibition of enzymatic degradation of adhesive–dentin interfaces. J Dent Res, 2009; 88(12): 1101-06. Swift EJ Jr, Bayne SC. Shear bond strength of a new one-bottle dentin adhesive. Am J Dent, 1997; 10(4): 184-88. Kanca J 3rd. Resin bonding to wet substrate. 1. Bonding to dentin. Quintessence Int, 1992; 23(1): 39-41. Reis A, Loguercio AD, Azevedo CL, de Carvalho RM, da Julio Singer M, Grande RH. Moisture spectrum of demineralized dentin for adhesive systems with different solvent bases. J Adhes Dent, 2003; 5(3): 183 (Çevrimiçi) http://www.psycho.uniduesseldorf.de/abteilungen/aap/gpower3, Erişim Tarihi: 10 Nisan 2013. Van Noort R, Noroozi S, Howard IC, Cardew G. A critique of bond strength measurements. J Dent, 1989; 117: 61–67. Van Noort R, Cardew GE, Howard
- IC, Noroozi S. The effect of local interfacial geometry on the measurement of thetensile bond strength to dentin. J Dent Res, 1991; 70: 889-93. DeHoff PH, Anusavice KJ, Wang Z.
- Three-dimensional finite element analysis of the shear bond test. Dent Mater, 1995; 11: 126–31. Versluis A, Tantbirojn D, Douglas
- WH. Why do shear bond tests pull out dentin? J Dent Res, 1997; 76: 1298–307. Placido E, Meira JB, Lima RG, Muench A, de Souza RM, Ballester RY. Shear versus micro-shear bond strength test: a finite element stress analysis. Dent Mater, 2007; 23: 1086-92. Ghassemieh E. Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries. Dent Mater, 2008; 24: 536- Scherrer SS, Cesar PF, Swain MV. Direct comparison of the bond strength results of the different test methods: a critical literature review. Dent Mater, 2010; 26: e78-93. Maciel KT, Carvalho RM, Ringle RD, Preston CD, Russell CM, Pashley DH. The effects of acetone, ethanol, HEMA, and air on the stiffness of human decalcified dentin matrix. J Dent Res, 1996; 11: 1851-58. Pashley DH, Agee KA, Nakajima M, Tay FR, Carvalho RM, Terada RS. Solventinduced dimensional changes in EDTA- de10
- J Dent, 1998; 11(5): 225-28. Van Landuyt KL, Peumans M, De
- Munck J, Lambrechts P, Van Meerbeek B. Extension of a one-step self-etch adhesive into a multi- step adhesive. Dent Mater, 2006; 22(6): 533-44. Van Meerbeek B, Van Landuyt K, De Munck J, Inoue S, Yoshida Y, Perdigao
- J. Bonding to enamel and dentin. In: Summit JB, Robbins JW, Hilton TJ, Schwarz RZ, editors. Fundamentals of operative dentistry. Berlin: Quintessence Publishing, 2006, p.183-260. Blunck U, Knitter K, Jahn KR. Sixmonth clinical evaluation of XP Bond in noncarious cervical lesions. J Adhes Dent, 2007; 9(2): 265-68. Ritter AV, Heymann HO, Swift EJ, Perdigäo J, Rosa BT. Effects of different re-wetting techniques on dentin shear bond strengths. J Esthet Dent, 2000; 12(2): 85-96. Orellana N, Ramírez R, Roig M, Giner L, Mercade M, Durán F, Herrera G.
- Comperative study of the microtensile bond strength of three different total etch adhesives with different solvents to wet and dry dentin(in vitro test). Acta Odontol Latinoam, 2009; 22(1): 47-56. Hegde MN, Manjunath J. Bond strength of newer dentin bonding agents in different clinical situations. Oper Dent, 2011; 36(2): 169-76. Kanca J 3rd. Improving bond strength through acid etching of dentin and bonding to wet dentin surfaces. J Am Dent Assoc, 1992; 123(9): 35-43.
Details
| Primary Language | Turkish |
|---|---|
| Journal Section | Original Research Articles |
| Authors | |
| Publication Date | July 29, 2013 |
| Published in Issue | Year 2013 Volume: 47 Issue: 2 |
Cite
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.