Evaluation of As, Cd, Ni and Se Content of Some Mineral Concrete Agents

Year 2024, , 44 - 51, 28.06.2024

İbrahim Saleh Elajaıl Hakan Şevik

https://doi.org/10.55385/kastamonujes.1483396

Abstract

In this study, the variation of arsenic (As), cadmium (Cd), nickel (Ni) and selenium (Se) concentrations in some materials used as concrete admixtures were evaluated. These heavy metals are extremely hazardous elements for both human and other living organisms and the environment. Due to these hazards, they are on the priority pollutant list of both ATSDR and EPA. Study results show that heavy metal concentrations in some additives are at very high levels. As a result of the study, the highest As concentrations were obtained in copper slag, vermiculite and cem III cement, the highest Cd concentrations in crushed stone and copper slag, the highest Ni concentrations in copper slag, wood ash and brick powder, and the highest Se concentrations in blast furnace slag and cem III cement. This may pose a great risk to the health of people working in the industry and the environment.

Keywords

Concrete, additive, heavy metals

References

• Worldometers, 2024. https://www.worldometers.info/
• Dogan, S., Kilicoglu, C., Akinci, H., Sevik, H., & Cetin, M. (2023). Determining the suitable settlement areas in Alanya with GIS-based site selection analyses. Environmental Science and Pollution research, 30(11), 29180-29189.
• Ghoma, W. E. O., Sevik, H., & kakaralar, K. (2023). Comparison of the rate of certain trace metals accumulation in indoor plants for smoking and non-smoking areas. Environmental Science and Pollution Research, 30(30), 75768-75776.
• Isinkaralar, O., Isinkaralar, K., Sevik, H., & Küçük, Ö. (2024). Spatial modeling the climate change risk of river basins via climate classification: a scenario-based prediction approach for Türkiye. Natural Hazards, 120(1), 511-528.
• Cetin, M., Sevik, H., Koc, I., & Cetin, I. Z. (2023). The change in biocomfort zones in the area of Muğla province in near future due to the global climate change scenarios. Journal of Thermal Biology, 112, 103434.
• Isinkaralar, O. (2024). QGIS-based modeling and analysis of urban dynamics affecting land surface temperature towards climate hazards in coastal zones of Portugal. Natural Hazards, 120(8), 7749-7764.
• Kaplan, G., Bayraktar, O. Y., Bayrak, B., Celebi, O., Bodur, B., Oz, A., & Aydin, A. C. (2023). Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes. Construction and Building Materials, 373, 130850.
• Memiş, S., Yılmazoğlu, M. U., & Mütevelli, İ. G. (2016). Kastamonu İlinde Kullanılan Betonların Nicel Analizi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 4(2), 756-764.
• İnce, G. Ç., & Yılmazoğlu, M. U. (2021). Probabilistic seismic hazard assessment of Muğla, Turkey. Natural Hazards, 107(2), 1311-1340.
• Isinkaralar, O., & Isinkaralar, K. (2023). Projection of bioclimatic patterns via CMIP6 in the Southeast Region of Türkiye: A guidance for adaptation strategies for climate policy. Environmental Monitoring and Assessment, 195(12), 1448.
• Sevik, H., Yıldız, Y., Özel, H.B. (2024). Phytoremediation and Long-term Metal Uptake Monitoring of Silver, Selenium, Antimony, and Thallium by Black Pine (Pinus nigra Arnold)” Bioresources, 19(3)
• Bayraktar, O. Y., Saglam-Citoglu, G., & Abo Aisha, A. E. S. (2019). The use of scrap tires in the construction sector. International Journal of Trend in Research and Development, 6(1), 253-256.
• Işınkaralar, K. (2020). Removal of formaldehyde and BTEX in indoor air using activated carbon produced from horse chestnut (Aesculus Hippocastanum L.) Shell. Ph.D. Thesis Hacettepe University, Institute of Science and Engineering, Department of Environmental Engineering. Ankara, Türkiye
• Isinkaralar, K. (2022). Some atmospheric trace metals deposition in selected trees as a possible biomonitor. Romanian Biotechnological Letters, 27(1), 3227-3236.
• Elajail, I. S. I., Sevik, H., Ozel, H. B., & Isik, B. (2022). Examining the chemical compositions of mineral concrete agents in terms of their environmental effects. Fresenius Environmental Bulletin, 31(9), 9784–9790
• Savas, D. S., Sevik, H., Isinkaralar, K., Turkyilmaz, A., & Cetin, M. (2021). The potential of using Cedrus atlantica as a biomonitor in the concentrations of Cr and Mn. Environmental science and pollution research, 28(39), 55446-55453.
• Yilmazoglu, M. U., & Ozocak, A. (2023). Bearing Capacity of Shallow Foundations on Unsaturated Silty Soils. Applied Sciences, 13(3), 1308.
• Özel, H. B., Şevik, H., Yıldız, Y., & Çobanoğlu, H. (2024). Effects of Silver Nanoparticles on Germination and Seedling Characteristics of Oriental Beech (Fagus orientalis) Seeds. BioResources, 19(2).
• Kaplan, G., Bayraktar, O. Y., Li, Z., Bodur, B., Yılmazoglu, M. U., & Alcan, B. A. (2023). Improving the eco-efficiency of fiber reinforced composite by ultra-low cement content/high FA-GBFS addition for structural applications: Minimization of cost, CO2 emissions and embodied energy. Journal of Building Engineering, 76, 107280.
• Koksal, F., Bayraktar, O. Y., Bodur, B., Benli, A., & Kaplan, G. (2023). Insulating and fire‐resistant performance of slag and brick powder based one‐part alkali‐activated lightweight mortars. Structural Concrete, 24(3), 3128-3146.
• Yaprak, H., Memis, S., Kaplan, G., Yilmazoglu, M. U., & Ozkan, I. G. M. (2018). Effects on compressive strenght of accelerated curing methods in alkali activated mortars. International Journal of Scientific and Technological Research, 4(5), 70-78
• Memiş, S., Mütevelli, İ. G., & Yılmazoğlu, M. U. (2016). Sinop İlinde Üretilen Hazır Betonların İstatistiksel Olarak Değerlendirilmesi. Engineering Sciences, 11(4), 83-92.
• Isinkaralar, K., Isinkaralar, O., Koç, İ., Özel, H. B., & Şevik, H. (2023). Assessing the possibility of airborne bismuth accumulation and spatial distribution in an urban area by tree bark: A case study in Düzce, Türkiye. Biomass Conversion and Biorefinery, 1-12.
• Arıcak, B., Cantürk, U., Koç, İ., Erdem, R., & Şevik, H. (2024). Shifts That May Appear in Climate Classifications in Bursa Due to Global Climate Change. Forestist
• Kaplan, G., & Bayraktar, O. Y. (2021). The effect of hemp fiber usage on the mechanical and physical properties of cement based mortars. Research on Engineering Structures & Materials, 7, 245-258.
• Bayraktar, O. Y., Yarar, G., Benli, A., Kaplan, G., Gencel, O., Sutcu, M., ... & Kadela, M. (2023). Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement. Structural Concrete, 24(1), 1152-1178.
• Turkoglu, M., Bayraktar, O. Y., Benli, A., & Kaplan, G. (2023). Effect of cement clinker type, curing regime and activator dosage on the performance of one-part alkali-activated hybrid slag/clinker composites. Journal of Building Engineering, 68, 106164.
• Isinkaralar, O., Isinkaralar, K., & Ambade, B. (2024). Assessment of societal health risks: Spatial distribution and potential hazards of toxic metals in street dust across diverse communities. Water, Air, & Soil Pollution, 235(5), 302.
• Isinkaralar, K., Isinkaralar, O., & Bayraktar, E. P. (2024). Ecological and Health Risk Assessment in Road Dust Samples from Various Land Use of Düzce City Center: Towards the Sustainable Urban Development. Water, Air, & Soil Pollution, 235(1), 84.
• Istanbullu, S. N., Sevik, H., Isinkaralar, K., & Isinkaralar, O. (2023). Spatial distribution of heavy metal contamination in road dust samples from an urban environment in Samsun, Türkiye. Bulletin of Environmental Contamination and Toxicology, 110(4), 78.
• Isinkaralar, O., Świsłowski, P., Isinkaralar, K., & Rajfur, M. (2024). Moss as a passive biomonitoring tool for the atmospheric deposition and spatial distribution pattern of toxic metals in an industrial city. Environmental Monitoring and Assessment, 196(6), 513.
• Koç, İ., Canturk, U., Isinkaralar, K., Ozel, H. B., & Sevik, H. (2024). Assessment of metals (Ni, Ba) deposition in plant types and their organs at Mersin City, Türkiye. Environmental Monitoring and Assessment, 196(3), 282.