Generating a Matlab Code with Parameter Optimization in Gearbox
Abstract
One of the most important engineering problems today is the optimization of systems and process parameters. Optimization is one of the longest and most costly steps to conclude for many multidisciplinary studies. Numerical analysis has been a widely applied approach to reduce this cost of time and money. In this study, first of all, a gearbox with geometric dimensions is modeled using Matlab commercial package software. The created model was then subjected to finite element analysis via student version of Ansys commercial package. The strength of the system was examined over the stress and deformation values obtained in those analysis. Considering the equivalent von Mises stress values obtained in the study, a maximum 200 MPa design on the gear wheels and a two-fold safe design according to the yield limit was revealed. In addition, a Matlab software that reveals the welding path for the reducer outer sleeve and jib crane has also been produced in this study.
Keywords
References
- Abdullah, A. L., Misha, S., Tamaldin, N., Rosli, M. A. M., & Sachit, F. A. (2019). Hybrid photovoltaic thermal PVT solar systems simulation via Simulink/Matlab. CFD letters, 11(4), 64-78.
- Baser, V. (2020). Effectiveness of School Site Decisions on Land Use Policy in the Planning Process. ISPRS International Journal of Geo-Information, 9(11). doi:10.3390/ijgi9110662
- Baser, V., & Biyik, C. (2018). Coastal and marine zone legislation within the concept of land management in Turkey. Survey Review, 51(369), 502-513. doi:10.1080/00396265.2018.1482854
- Büyükkaya, K., & Güner, F. (2020). Determination of Static Fracture Toughness of Nettle Fibre (Urtica Dioica)/Polymethyl-methacrylate Composites Using Different Fracture Methods. Mechanics, 26(2), 95-102. doi:10.5755/j01.mech.26.2.23308
- Coruhlu, Y. E., Baser, V., & Yildiz, O. (2020). Object-based geographical data model for determination of the cemetery sites using SWOT and AHP integration. Survey Review, 53(377), 108-121. doi:10.1080/00396265.2020.1747843
- Da Silva, R. M., & Fernandes, J. L. M. (2010). Hybrid photovoltaic/thermal (PV/T) solar systems simulation with Simulink/Matlab. Solar energy, 84(12), 1985-1996. doi.org/10.1016/j.solener.2010.10.004
- Dmitry, R., Alexander, L., & Valery, P. (2020). Development of Mechanisms for Automatic Correction of Industrial Complex Tools in the Preprocessing of Laser Welding for Small-Scale and Piece Production Using Computer Vision. Machines, 8(4). doi:10.3390/machines8040086
- Dourado da Silva, R. G., Magalhães, E. d. S., & Lima e Silva, S. M. M. (2022). Estimating the Absorption Efficiency in a Laser Welding Process Using a Nonlinear Inverse Problem Method. SSRN Electronic Journal. doi:10.2139/ssrn.4036411
- Eremochkin, S. Y., & Dorokhov, D. V. (2021, 19-21 Nov. 2021). Characteristics Research of the Semiconductor Frequency Converter in Matlab Simulink. Paper presented at the 2021 XV International Scientific-Technical Conference on Actual Problems Of Electronic Instrument Engineering (APEIE).
- Geng, Y., Zhang, Y., Tian, X., Shi, X., Wang, X., & Cui, Y. (2022). A novel welding path planning method based on point cloud for robotic welding of impeller blades. The International Journal of Advanced Manufacturing Technology, 119(11-12), 8025-8038. doi:10.1007/s00170-021-08573-3
