MATLAB/SİMULİNK’DE ASENKRON MOTORLARIN DAYANIKLI SKALER HIZ DENETİMİ

Volume: 2 Number: 1 October 15, 2015
EN TR

-

Abstract

Looking at the industrial application of our environment, We see that the inductionmotor is preferred due to advantages such as low costs, low maintenance requirements,high efficiency.motors rather it is important. Expected from the control system, different speedand load conditions, ability to fast and accurate answers. The study analyzed untilnow, We see that the control of IM used scalar and vector control methods. Vectorcontrol method shows expected performance in different applications, scalar controlmethod can not show the desired performance in low speed applications. In thisstudy, variable load conditions and IM working in low and Şxed speeds the scalarspeed control performance was performed to improve. Matlab / Simulink simulationperformed for this system, PI (Proportional, Integral) controller with robust scalarspeeds control is proposed. In the proposed method, Şxed speed and in response tovariable loads, faster dynamic response of IM was observed

Keywords

References

  1. Adiuku, C., Beig, A., & Kanukollu, S. (2015). Sensorless closed loop V/f control of medium-voltage high-power induction motor with synchronized space vector PWM. GCC Conference and Exhibition (GCCCE), 2015 IEEE 8th, 1-6.
  2. Bose, B. K. (1982). Adjustable speed ac drive-A technology status review., (s. 70 (2), 116-135).
  3. Bose, B. K. (2001). Modern power electronics and AC drives. Upper Saddle River, USA: Prentice Hall.
  4. Ilango, G. S., & Rajasekar, N. (2009). An improved energy saving v/f control technique for solar powered single-phase induction motor. Energy Conversion and Management, 50(12), 2913-2918.
  5. Jisha, L., & Thomas, A. (2013). A comparative study on scalar and vector control of Induction motor drives. Circuits, Controls and Communications (CCUBE), 2013 International conference on (s. 1-5). Bengaluru, India: IEEE Conference Publications.
  6. Liu, Y., & Piepenbreier, B. (2014). Comparison of Stabilization Methods for V/f controlled Induction Motor Drive System. PCIM Europe 2014; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management; Proceedings of, 1-8.
  7. Sala-Perez, P., & Galceran-Arellano, S. (2013). A sensorless stable V/f control method for a five-phase PMSM. Power Electronics and Applications (EPE), 15th European Conference on.
  8. Sarioğlu, M., Gökaşan, M., & Boğasyan, S. (2003). Asenkron Makineler ve Kontrolü.

Details

Primary Language

Turkish

Subjects

-

Journal Section

-

Authors

Faruk Demir This is me

Publication Date

October 15, 2015

Submission Date

August 14, 2015

Acceptance Date

-

Published in Issue

Year 1970 Volume: 2 Number: 1

APA
Otkun, Ö., & Demir, F. (2015). MATLAB/SİMULİNK’DE ASENKRON MOTORLARIN DAYANIKLI SKALER HIZ DENETİMİ. Küresel Mühendislik Çalışmaları Dergisi, 2(1), 1-8. https://izlik.org/JA48GK33HT
AMA
1.Otkun Ö, Demir F. MATLAB/SİMULİNK’DE ASENKRON MOTORLARIN DAYANIKLI SKALER HIZ DENETİMİ. Küresel Mühendislik Çalışmaları Dergisi. 2015;2(1):1-8. https://izlik.org/JA48GK33HT
Chicago
Otkun, Özcan, and Faruk Demir. 2015. “MATLAB/SİMULİNK’DE/ASENKRON/MOTORLARIN/DAYANIKLI//SKALER/HIZ/DENETİMİ”. Küresel Mühendislik Çalışmaları Dergisi 2 (1): 1-8. https://izlik.org/JA48GK33HT.
EndNote
Otkun Ö, Demir F (October 1, 2015) MATLAB/SİMULİNK’DE ASENKRON MOTORLARIN DAYANIKLI SKALER HIZ DENETİMİ. Küresel Mühendislik Çalışmaları Dergisi 2 1 1–8.
IEEE
[1]Ö. Otkun and F. Demir, “MATLAB/SİMULİNK’DE ASENKRON MOTORLARIN DAYANIKLI SKALER HIZ DENETİMİ”, Küresel Mühendislik Çalışmaları Dergisi, vol. 2, no. 1, pp. 1–8, Oct. 2015, [Online]. Available: https://izlik.org/JA48GK33HT
ISNAD
Otkun, Özcan - Demir, Faruk. “MATLAB/SİMULİNK’DE/ASENKRON/MOTORLARIN/DAYANIKLI//SKALER/HIZ/DENETİMİ”. Küresel Mühendislik Çalışmaları Dergisi 2/1 (October 1, 2015): 1-8. https://izlik.org/JA48GK33HT.
JAMA
1.Otkun Ö, Demir F. MATLAB/SİMULİNK’DE ASENKRON MOTORLARIN DAYANIKLI SKALER HIZ DENETİMİ. Küresel Mühendislik Çalışmaları Dergisi. 2015;2:1–8.
MLA
Otkun, Özcan, and Faruk Demir. “MATLAB/SİMULİNK’DE/ASENKRON/MOTORLARIN/DAYANIKLI//SKALER/HIZ/DENETİMİ”. Küresel Mühendislik Çalışmaları Dergisi, vol. 2, no. 1, Oct. 2015, pp. 1-8, https://izlik.org/JA48GK33HT.
Vancouver
1.Özcan Otkun, Faruk Demir. MATLAB/SİMULİNK’DE ASENKRON MOTORLARIN DAYANIKLI SKALER HIZ DENETİMİ. Küresel Mühendislik Çalışmaları Dergisi [Internet]. 2015 Oct. 1;2(1):1-8. Available from: https://izlik.org/JA48GK33HT