Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi

Year 2021, Volume: 60 Issue: 4, 209 - 217, 21.12.2021

Turan Uysal İbrahim Ethem Karaağaçlıoğlu Onur Güven

https://doi.org/10.30797/madencilik.922988

Cited By: 1

Abstract

Flotasyon işlemlerinde tane boyutu ve tane morfolojisi gibi tanelerin fiziksel özellikleri, hem tane-tane hem de tane-kabarcık etkileşimlerinde önemli bir rol oynar ve bu da onları flotasyon işlemlerinin değerlendirilmesinde çok önemli kılmaktadır. Bu çalışmada, farklı sürelerde pürüzlendirilen galen tanelerinin pürüzlülük süresine bağlı olarak elde edilen morfolojik özelliklerinin flotasyon verimi ve topaklanma özelliklerine etkisi araştırılmıştır. Deneysel çalışmaların sonuçlarına göre artan pürüzlülük değerlerinde tanelerin flotasyon ve topaklanma özelliklerinin önemli oranda arttığı belirlenmiştir. Sonuç olarak tanelerin tercihli üretimi ile flotasyonun daha düşük kollektör konsantrasyonlarına ötelenerek daha verimli hale getirilebileceği belirlenmiştir.

Keywords

Galen, Pürüzlülük, Topaklanma, Flotasyon

Supporting Institution

TÜBİTAK

Project Number

117M659

Thanks

Yazarlar çalışmaya verdiği destekten dolayı TÜBİTAK (117M659 no’lu Proje ve TÜBİTAK 2218) ve Berivan Tunç’a teşekkür ederler.

Effect of Particle Roughness on Flotation and Aggregation of Galena Mineral

Abstract

Physical properties of particles such as particle size and particle morphology plays an important role on both particle-particle and particle-bubble interactions which makes them very important on evaluation of flotation processes. In this study, the contribution of roughness of galena particles produced as a function of abrasion time was investigated on their flotation recovery and aggregation characteristics. According to the results of experimental studies, it was found that the flotation and aggregation characteristics increased in proportion to their roughness value. As a result, it was determined that with the preferential production of particles, flotation can be made more efficient by shifting to lower collector concentrations.

Keywords

Galena, Roughness, Aggregation, Flotation

Project Number

117M659

References

• Chandra, A.P., Gerson, A.R., 2009. A review of the fundamental studies of the copper activation mechanisms for selective flotation of the sulfide minerals, sphalerite and pyrite, Advances in Colloid and Interface Science, 145 (1-2), 97-110.
• Feng, D., Aldrich, C., 2000. A comparison of the flotation of ore from the Merensky Reef after wet and dry grinding, International Journal of Mineral Processing, 60 (2), 115–129.
• Fuerstenau, D., Pradip, P., 2005. Zeta Potentials in the flotation of oxide and silicate minerals, Advances in Colloid and Interface Science, 114-115, 9-26.
• Güven, O., Serdengecti, M.T., Tunc, B., Ozdemir, O., Karaagaclioglu, I.E., Celik, M.S., 2020. Effect of particle shape properties on selective separation of chromite from serpentine by flotation, Physicochemical Problems of Mineral Processing, 56 (5), 818–828.
• Güven, O., Celik, M.S., Drelich, J., 2015. Flotation of methylated roughened glass particles and analysis of particle-bubble energy barrier, Minereals Engineering, 79, 125-132.
• Güven, O., Çelik, M.S., 2016. Interplay of particle shape and surface roughness to reach maximum flotation efficiencies depending on collector concentration, Mineral Processing and Extractive Metallurgy Review, 37 (6), 412-417.
• Güven, O., Karakas, F., Kodrazi, N., Çelik, M. S., 2017. Dependence of morphology on anionic flotation of alumina, International Journal of Mineral Processing, 156, 69-74.
• Rahimi, M., Dehghani, F., Rezai, B., 2012. Influence of the roughness and shape of quartz particles on their flotation kinetics, International Journal of Minerals, Metallurgy and Materials, 19, 4, 284-289.
• Rezai, B., Rahimi, M., Aslani, M.R., Eslamian, A., Dehghani F., 2010. Relationship between surface roughness of minerals and their flotation kinetics, In Proceedings of the XI International Mineral Processing and Technology Congress, 232-238.
• Ulusoy, U., Yekeler, M., 2005. Correlation of the surface roughness of some industrial with their wettability parameters, Chemical Engineering and Processing, 44, 557-565.
• Uysal, T., Guven O., Ozdemir, O., Karaagaclioglu, I.E., Tunç, B., Çelik, M.S., 2021. Contribution of particle morphology on flotation and aggregation of sphalerite particles, Minerals Engineering, 165, 106860.
• Yekeler, M., Ulusoy, U., Hiçyılmaz, C., 2004. Effect of particle shape and roughness of talc mineral ground by different mills on the wettability and floatability, Powder Technology, 140 (1-2), 68-78.