Research Article
Issue Editorial Board
Aim & Scope
Muş Alparslan University Faculty of Engineering and Architecture journal gives priority to the publication of both experimental and theoretical studies in the field of basic engineering sciences, focusing on current research topics in engineering. It encourages academic publications involving interdisciplinary studies and technologies. It aims to contribute to the national and international development of related sciences and individuals, and to develop resources related to these fields. The languages of the journal are Turkish and English.
Our journal, which includes theoretical studies on the foundation of engineering science, technological developments and interdisciplinary studies focused on engineering; It is published twice a year (December, June) with theoretical, experimental, research and compilation content, and aims to convey the current academic literature to researchers and the public.
Author Guidelines
Articles sent for publication in our journal must be prepared according to the journal article writing format. General information regarding the writing rules is summarized below.
GENERAL
Studies accepted for publication after peer-review should be uploaded to the system after they are rearranged by the authors in accordance with the print format. No typesetting will be done except for the format-related application procedures of our editors. Studies must be written with an Office 2013 or higher word processing application.
PAGE STRUCTURE and LAYOUT
For works to be prepared in A4 size, 2.5 cm margins should be left on all sides. The header should be marked differently on odd and even pages. The header should be written in 8-point Times New Roman font. The page should be arranged as a single column.
ARTICLE MAIN TITLE
Turkish: The title of the article should be written in Times New Roman font, 12 points, only the initials should be capitalized, centered on both sides and in dark font, and 1 line space should be left before and after the Turkish title.
English: Only the initials should be capitalized, centered and bold, with Times New Roman font and 10 points. One line space should be left after the English title.
AUTHOR NAMES
Author names should be written in Times New Roman font, centered, bold and 10 point. There should be no spaces between the names of the authors and the address. Address references of author names should be specified in exponential 5 font size.
ADDRESSES
Addresses should be written in Times New Roman font, centered and 9 points. Only the e-mail address of the responsible author should be written at the bottom of the address lines in the same font and size. The e-mail address should be written in 9 points, without leaving any spaces, just below the address.
SUMMARY
Turkish: The abstract should be written in bold Times New Roman font, 9 points, the initials should be capitalized and written at the beginning of the first line. The abstract should be written in a single paragraph and not exceeding 150 words, at least 50.
English: The abstract should be written in bold Times New Roman font, as in the Turkish abstract, in 9 font size, with capital letters, and not exceeding 150 words, with a single paragraph of at least 50.
KEYWORDS
Turkish: Key words to be written in 9 font size, capitalized and bold Times New Roman format, after leaving 1 line of space under the abstract text, must be at least 3 and at most 6 words. There should be 2 lines of space after the keywords.
English: Key words to be written in 9 font size, capitalized and bold Times New Roman, after leaving 1 line space under the abstract text, must be at least 3 and at most 6 words. There should be 2 lines of space after the keywords.
ARTICLE TITLES
Headings should be numbered, all headings should be in Times New Roman font and 10 points;
• In first-degree titles, all letters of all words are capitalized,
• In secondary sub-headings, the first letter of all words is capitalized,
• In third degree titles, only the first letter of the first word should be capitalized.
One line space should be left before and after the headings. Headings should be left aligned.
The titles of the articles should be able to express the following contents in order;
• Introduction
• Material and Method
• Experimental Part
• Materials and Methods Discussion
• Conclusion
ABOUT the TEXT
The text should be written in 10 font size with single line spacing, leaving 1 line space (10 points) after the Keywords. Paragraph indent should be 0.7 cm and 6 pt spacing should be left before and after paragraphs. The text should be written in justified form.
TABLE, FIGURE and EQUATIONS
Tables and figures should be numbered in the order in which they are used. The titles of the tables should be in the upper-middle position, and the titles of the figures must be in the lower-middle position. Each table and figure must be written as Table 1, Figure 1 without breaking the order, and must be in 10 pt Times New Roman bold. In the explanations of tables and figures, only the first letter should be capitalized, Times New Roman 10 points and should not be written in bold font. Formulas and equations should be written using Math Type or Word Equation Editor.
REFERENCES
References in our article should be cited in square brackets by numbering “[1]”, references should be given in their original language. References should be written in Times New Roman 9 points. Sample bibliography content is as follows:
1. Chen Y. R., Chao K., Kim M. S. Machine vision technology for agricultural applications, Computers and Electronics in Agriculture, 36 173-191, 2002.
2. Kumar A. Computer vision based fabric defect detection: a survey, IEEE Transactions on Industrial Electronics, 55 348-363, 2008.
3. Yetis H., Baygin M., Karaköse M. A New Micro Genetic Algorithm Based Image Stitching Approach for Camera Arrays at Production Lines, The 5th International Conference on Manufacturing Engineering and Process (ICMEP 2016), 25-27 May, 2016.
Ethical Principles and Publication Policy
Publication Ethics and Responsibilities The publication process of our journal requires everyone involved (authors, referees, editors) to comply with academic ethical principles and standards. In this context, it is assumed that all academicians involved in the process accept the following responsibilities. While determining the responsibilities expressed in this context, the rules and responsibilities specified by the Committee on Publication Ethics (COPE), which regulates open access rules, were used.
Ethical Responsibilities of Authors
The author(s) must be original in all their academic works. If they benefit from other academic studies in their studies, they are required to give full reference and/or citation. Persons who do not contribute to the study should not be included as authors. Researchers cannot submit their work to more than one publication at the same time. Each submission process must be made following the conclusion of the previous application. A study published in another medium should not be sent to our journal. In case the submitted works contain content, situations and relationships that will constitute a conflict of interest, information should be provided. Authors should be ready to present the raw data and experimental information of the study to the editorial board and scientific committee, if requested. It is not possible to add an author, change the order or remove an author for a work whose evaluation process has been started. Author(s) should have documents showing that the data they use in their studies (if any) have ethical rights, usage rights, and necessary permissions for research/analysis/experiment. Author(s) should inform the journal editor or journal publisher and cooperate in correction or retraction if they notice an error in their review, early view stage or published work.
Ethical Duties and Responsibilities of Editors
As stated by COPE, which ensures the integrity of open access rules clearly stated on the Dergipark page; To ensure continuity in the development of the journal, to carry out the steps to increase the quality of academic studies published in the journal, to work towards the needs of readers and authors, to communicate openly and transparently in matters that require correction or explanation, to continue all business processes without compromising intellectual property rights and academic ethical rules. are the main ethical duties and responsibilities of the editor.
Ethical Responsibilities of Referees
A referee should evaluate academic studies in his field of expertise. It should be impartial and confidential in its evaluations. Within the scope of these principles, the evaluation results of the studies should not be shared with the public at the end of the process and should be destroyed. If a conflict of interest is detected as a result of its evaluation, the relevant editor should be informed and the review process of the study should be rejected. The result of the refereeing evaluation should be conveyed in a constructive and polite manner, and negative and personal communication style containing hostility, slander or insult should not be used. He/she should evaluate the studies accepted as referees within the promised time and within the framework of the specified academic ethical rules and communicate the result.
Ethical Responsibilities of Publisher
Our journal makes the editors responsible for all the works included in the process. The editor carries out the necessary measures to prevent political or economic gains from the work done in the journal. Our journal is committed to independence in the creation of editorial decisions. Our journal undertakes to protect the intellectual property and copyrights of all accepted works. The responsibility of the editors to take the necessary precautions regarding academic misconduct and plagiarism related to the process is also under the commitment of our journal.
Relations with Authors
In the articles sent by the authors, the editors make a positive or negative decision by evaluating the originality of the study, the clarity of the narrative, and the suitability of the journal's purpose-scope. In this context, all studies that do not pose a serious problem are included in the evaluation process. Editors should consider referee suggestions. Editors should not change the decisions made by previous editors about the studies unless a major problem in terms of ethics and scope is detected.
Relations with Referees
Blind Review and Review Process policies should be meticulously followed by the editor. Reviewers should be selected according to the field of expertise of the relevant publication. All information about the publication and the process should be shared openly with the referees. It is the editor's responsibility to determine whether there is a conflict of interest between the author and the referee. With the start of the evaluation process, the identities of the referees should be kept confidential. Editors should encourage referees for impartiality, scientificity and objectivity. Care should be taken to keep the referee pools wide. Practices and policies should be pursued to increase the performance of referees in the evaluation process. Processes that are far from being scientific and academic ethical rules should be prevented.
Relations with the Readers
The editor must make decisions to meet the expectations of the audience the magazine addresses. Care should be taken that the studies to be published are original studies that will contribute to all levels of the academy (readers, researchers) and the literature. It should take into account the feedback from the readers and the academic community and provide explanatory feedback.
Relations with the Editorial Board
The editor is responsible for the members of the editorial board to work in compliance with the relevant policies and guidelines. Within the scope of these policies, the relevant members should be informed and informed about the developments. New members should be provided with the necessary training and information. Relations with Journal Owner and Publisher Within the framework of academic ethical rules, the editor and the publisher sign an independence agreement. In other words, editors are independent of the publisher and journal owner in their decisions.
Relations with Owner of Journal and the Publisher
Within the framework of academic ethical rules, the editor and the publisher sign an independence agreement. In other words, editors are independent of the publisher and journal owner in their decisions.
Protection of Personal Data
The journal editor is responsible for ensuring that all information, subjects and images found in the studies published in the journal are protected. Individuals used as subjects in the study, if any, should refuse to work unless their consent is documented. In addition, the journal editor is responsible for protecting the individual data of everyone involved in the publication process (author, referee and reader).
Ethics Committee, Human and Animal Rights
The editor should ensure the protection of human and animal rights in general within the scope of the work. It is responsible for controlling the necessary permissions and ethics committee reports regarding the data and subjects used in the study experiments and research.
Precaution against Potential Abuse and Abuse
It is the editor's duty to take precautions against abuse and misconduct. The editor, who carries out a meticulous work in detecting and evaluating complaints about this subject, should share the relevant findings and ensure the continuation of the academic ethical environment.
Protection of Intellectual Property Rights
The editor of the journal is responsible for protecting the intellectual property rights of all studies and defending the rights of the journal, authors and referees in case of violations of academic ethics and other negativities. In addition, the journal editor should confirm whether the studies published in the journal violate the intellectual property of another academic work as a result of plagiarism and take the necessary action. At the beginning of these measures, the plagiarism report of the article is requested from the author along with his/her work during the evaluation process.
NOTE: If you encounter a situation that does not comply with academic ethics in our journal, please contact us immediately via muhmimdergi@alparslan.edu.tr .Publication Ethics and Responsibilities The publication process of our journal requires everyone involved (authors, referees, editors) to comply with academic ethical principles and standards. In this context, it is assumed that all academicians involved in the process accept the following responsibilities. While determining the responsibilities expressed in this context, the rules and responsibilities specified by the Committee on Publication Ethics (COPE), which regulates open access rules, were used.
The author(s) must be original in all their academic works. If they benefit from other academic studies in their studies, they are required to give full reference and/or citation. Persons who do not contribute to the study should not be included as authors. Researchers cannot submit their work to more than one publication at the same time. Each submission process must be made following the conclusion of the previous application. A study published in another medium should not be sent to our journal. In case the submitted works contain content, situations and relationships that will constitute a conflict of interest, information should be provided. Authors should be ready to present the raw data and experimental information of the study to the editorial board and scientific committee, if requested. It is not possible to add an author, change the order or remove an author for a work whose evaluation process has been started. Author(s) should have documents showing that the data they use in their studies (if any) have ethical rights, usage rights, and necessary permissions for research/analysis/experiment. Author(s) should inform the journal editor or journal publisher and cooperate in correction or retraction if they notice an error in their review, early view stage or published work.
Ethical Duties and Responsibilities of Editors
As stated by COPE, which ensures the integrity of open access rules clearly stated on the Dergipark page; To ensure continuity in the development of the journal, to carry out the steps to increase the quality of academic studies published in the journal, to work towards the needs of readers and authors, to communicate openly and transparently in matters that require correction or explanation, to continue all business processes without compromising intellectual property rights and academic ethical rules. are the main ethical duties and responsibilities of the editor.
Ethical Responsibilities of Referees
A referee should evaluate academic studies in his field of expertise. It should be impartial and confidential in its evaluations. Within the scope of these principles, the evaluation results of the studies should not be shared with the public at the end of the process and should be destroyed. If a conflict of interest is detected as a result of its evaluation, the relevant editor should be informed and the review process of the study should be rejected. The result of the refereeing evaluation should be conveyed in a constructive and polite manner, and negative and personal communication style containing hostility, slander or insult should not be used. He/she should evaluate the studies accepted as referees within the promised time and within the framework of the specified academic ethical rules and communicate the result.
Ethical Responsibilities of Publisher
Our journal makes the editors responsible for all the works included in the process. The editor carries out the necessary measures to prevent political or economic gains from the work done in the journal. Our journal is committed to independence in the creation of editorial decisions. Our journal undertakes to protect the intellectual property and copyrights of all accepted works. The responsibility of the editors to take the necessary precautions regarding academic misconduct and plagiarism related to the process is also under the commitment of our journal.
Relations with Authors
In the articles sent by the authors, the editors make a positive or negative decision by evaluating the originality of the study, the clarity of the narrative, and the suitability of the journal's purpose-scope. In this context, all studies that do not pose a serious problem are included in the evaluation process. Editors should consider referee suggestions. Editors should not change the decisions made by previous editors about the studies unless a major problem in terms of ethics and scope is detected.
Relations with Referees
Blind Review and Review Process policies should be meticulously followed by the editor. Reviewers should be selected according to the field of expertise of the relevant publication. All information about the publication and the process should be shared openly with the referees. It is the editor's responsibility to determine whether there is a conflict of interest between the author and the referee. With the start of the evaluation process, the identities of the referees should be kept confidential. Editors should encourage referees for impartiality, scientificity and objectivity. Care should be taken to keep the referee pools wide. Practices and policies should be pursued to increase the performance of referees in the evaluation process. Processes that are far from being scientific and academic ethical rules should be prevented.
Relations with the Readers
The editor must make decisions to meet the expectations of the audience the magazine addresses. Care should be taken that the studies to be published are original studies that will contribute to all levels of the academy (readers, researchers) and the literature. It should take into account the feedback from the readers and the academic community and provide explanatory feedback.
Relations with the Editorial Board
The editor is responsible for the members of the editorial board to work in compliance with the relevant policies and guidelines. Within the scope of these policies, the relevant members should be informed and informed about the developments. New members should be provided with the necessary training and information. Relations with Journal Owner and Publisher Within the framework of academic ethical rules, the editor and the publisher sign an independence agreement. In other words, editors are independent of the publisher and journal owner in their decisions.
Relations with Owner of Journal and the Publisher
Within the framework of academic ethical rules, the editor and the publisher sign an independence agreement. In other words, editors are independent of the publisher and journal owner in their decisions.
Protection of Personal Data
The journal editor is responsible for ensuring that all information, subjects and images found in the studies published in the journal are protected. Individuals used as subjects in the study, if any, should refuse to work unless their consent is documented. In addition, the journal editor is responsible for protecting the individual data of everyone involved in the publication process (author, referee and reader).
Ethics Committee, Human and Animal Rights
The editor should ensure the protection of human and animal rights in general within the scope of the work. It is responsible for controlling the necessary permissions and ethics committee reports regarding the data and subjects used in the study experiments and research.
Precaution against Potential Abuse and Abuse
It is the editor's duty to take precautions against abuse and misconduct. The editor, who carries out a meticulous work in detecting and evaluating complaints about this subject, should share the relevant findings and ensure the continuation of the academic ethical environment.
Protection of Intellectual Property Rights
The editor of the journal is responsible for protecting the intellectual property rights of all studies and defending the rights of the journal, authors and referees in case of violations of academic ethics and other negativities. In addition, the journal editor should confirm whether the studies published in the journal violate the intellectual property of another academic work as a result of plagiarism and take the necessary action. At the beginning of these measures, the plagiarism report of the article is requested from the author along with his/her work during the evaluation process.
NOTE: If you encounter a situation that does not comply with academic ethics in our journal, please contact us immediately via muhmimdergi@alparslan.edu.tr .
Price Policy
Makale gönderimi ve süreç işletimi ücretsizdir.
Indexes
Other Indexes
Journal Boards
Editor
Assistant Editor
Field Editors /Computer Engineering
Field Editors/Environmental Engineering
Field Editors Electrical-Electronics Engineering
Gülten Çetintaş received the B.S. and M.S. degree in Electrical and Electronics Engineering from Firat University, Elazığ,
Turkey, in 2012 and 2016, respectively. She continues her PhD in Electrical and Electronics Engineering at Inonu University,
Malatya, Turkey. She is currently working as a research assistant in the Department of Electrical and Electronics Engineering
at Mus Alparslan University, Mus, Turkey. Her primary research interest lies in the area of systems and control.
Field Editors Industrial Engineering
Field Editors Food Engineering
Field Editors Civil Engineering
Field Editors Mechanical Engineering
Field Editors Urban and Regional Planning
Field Editors Software Engineering
Architecture
Karadeniz Teknik Üniversitesi Mimarlık Bölümü'nden 2009 yılında mezun olduktan sonra 2015 yılında Karadeniz Teknik Üniversitesi Mimarlık Bölümü'nden yüksek lisans derecesini, 2022 yılında Gazi Üniversitesi'nden doktora derecesini almıştır. 2022 yılından beri Muş Alparslan Üniversitesi Mimarlık Bölümünde akademik çalışmalarına devam etmektedir.
Editorial Board / Field Editors
JOURNAL PUBLISHING AND ADVISORY BOARD
Taha ETEM received the B.Sc. degree in Electrical-Electronics Engineering from Firat University, Elazig, Turkey, in 2013, and the M.Sc. degree in Electrical-Electronics Engineering from Inonu University, Malatya, Turkey, in 2017, and received the Ph.D. degree in Electrical-Electronics Engineering from Firat University, Elazig, Turkey, in 2022. He was with Cankiri Karatekin University, Cankiri, Turkey, as a Faculty Member. He is currently an Assistant Professor in the Computer Engineering Department. His research interests include encryption systems, random number generators, smart systems and radio-frequency systems.
Web
Buket Karatop, İstanbul Teknik Üniversitesi Endüstri Mühendisliğinden 1986 yılında mezun olduktan sonra, Yıldız Teknik Üniversitesi Endüstri Mühendisliğinden Yüksek lisans, Sakarya Üniversitesi Endüstri Mühendisliğinden stratejik planlamada yapay zekâ konulu teziyle Doktora derecesinden mezun olmuştur.
Alarko ve Şişecam şirketlerinin çeşitli kademelerinde yönetici olarak ve Erciyes Üniversitesi, Atatürk Üniversitesi, Süleyman Demirel Üniversitesi Mühendislik Fakültesi Endüstri Mühendisliği bölümünde akademisyen olarak görev yapmıştır. Mühendislik eğitimi akreditasyonu (MÜDEK) koordinatörü, Stratejik Planlama ve Kalite Geliştirme koordinatörü olarak anılan Üniversitelerde görev almıştır. İstanbul Üniversitesi Açık ve Uzaktan Eğitim Fakültesinin kurulmasında görev almış, Fakültenin kurumsallaşma sürecini yöneterek, uzaktan eğitim fakültesine ISO:9001:2008 belgesi almıştır. Uzaktan eğitimde EFQM (Avrupa Kalite Mükemmellik Modeli) değerlendirmesinden geçerek ödül almıştır. TC Sağlık Bakanlığı Kamu Hastaneleri Kurumunda “kurumsallaşma” danışmanlığı ve Sağlık hizmetleri genel müdürlüğünde “uzaktan sağlık eğitim sisteminin ISO 9001 ve EFQM şartlarında süreç tasarımı ve kurumsallaşma” danışmanlığı yapmıştır. Yönetim ve Strateji bilim alanında 2022 yılında Doçent unvanını almıştır. Halen İstanbul Üniversitesi Cerrahpaşa’da öğretim üyesi olarak görev yapmakta olup aynı zamanda Lisansüstü Eğitim Enstitüsü, Savunma teknolojileri ABD da yeni nesil stratejik yönetim, bulanık ÇKKV gibi dersler vermektedir. Yapay zekâ, stratejik yönetim, kalite yönetimi, çok kriterli karar verme, uzaktan eğitim ve ahilik konularında akademik çalışmalarını sürdürmektedir.
İngilizce, ibranice
Dr. Chandio is a Professor; a consultant and an HEC-approved PhD Supervisor in Pakistan. Having a wealth of experience as an academician, consultant, failure analyst, and researcher; his expertise lies in Engineering Materials, reverse engineering, failure analysis, etc. Moreover, he is working with the government of Pakistan on Export/Import Requirements of Materials, feasibility reports & assessments. In addition, Prof. Dr. Chandio heads a group titled “Advanced Materials & Sustainable Environments at NED University of Engineering & Technology & dedicated to the advancement of knowledge and problem-based solutions. On his credit, there are over 120 research articles and currently supervising numerous PhD and Masters students at NED University. Also, he is an editor and board member of various journals in addition to being a reviewer to over a dozen journals. Dr. Chandio has applied for patents and is writing up a book on Advanced Materials.
Dr. Jreissat is a leading expert in Industrial Engineering with over 20 years of experience in both academia and industry. His expertise includes improving system efficiency and performance through supply chain systems, lean operations, maintenance engineering, and sustainable production systems. He has successfully led numerous national and international research initiatives and has an extensive publication record in peer-reviewed, high-impact journals. Dr. Jreissat serves on editorial boards and as a reviewer for esteemed international academic outlets. Known for translating advanced research into practical solutions, he contributes to improving productivity, resilience, and innovation across manufacturing and service sectors. His work demonstrates a strong dedication to excellence in research, teaching, and professional service.
=
Ahmed MOHAMMED received the B.Sc. degree in Software Engineering from Technical College Kirkuk, Iraq, in 2003, and the M.Sc. degree in Computer Engineering from Cankaya University, Ankara, Turkey, in 2015, and received the Ph.D. degree in Computer Engineering from National School of Electronics and Telecommunications of Sfax, University of Sfax, Tunis, in 2025. He is currently an Assistant Professor in the Computer Engineering at the University of Kirkuk, Iraq. His research interests include Machine Learning Algorithms, Intrusion Detection System, Unmanned Aerial Vehicle Information Security, Data and Information Privacy, Data Mining, and Deep Learning.
Currently works at the Department of Mechanical Engineering (Faculty of Engineering), Kirkuk University.
Ph.D. Professor (Associate) in Mechanical Engineering. (Ph.D. Selcuk University Konya, Turkey);
Msc mechanical Engineering in Gazi University-Ankara Turkey,
