Research Article
BibTex RIS Cite

TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ

Year 2021, Volume: 29 Issue: 3, 413 - 422, 31.12.2021
https://doi.org/10.31796/ogummf.975079

Abstract

Tanelerin ıslanabilirlik özelliklerindeki farklarından faydalanan bir zenginleştirme yöntemi olan “flotasyon” prosesinde, verimin arttırılması için ortam özelliklerinin yanı sıra, tanelerin fiziksel özelliklerinin de değerlendirilmesi gerekmektedir. Bu kapsamda tane morfolojisinin analiz edilmesi, kabarcık-tane işlemleri kadar, tane-tane etkileşimlerinin de ortaya konulması açısından oldukça önem taşımaktadır. Bu çalışmada, farklı morfolojik özelliklere sahip cam küresi tanelerinin flotasyon karakteristiklerinin yanı sıra kabarcık-tane sürelerindeki değişimlerde incelenmiştir. Sonuç olarak artan pürüzlülük ve azalan yuvarlaklık değerlerinde daha düşük kabarcık-tane yapışma süreleriyle beraber, daha yüksek flotasyon verimleri elde edilmiştir. Bu sonuçlar tane üretim yöntemlerinin kontrolü ile verimlerin arttırılabileceğine dair ışık tutmaktadır.

References

  • Dang-Vu T., Hupka, J., Drzymala, J., 2006, “Impact of roughness on hydrophobicity of particles measured by the Washburn method”, Physicochem. Probl. Miner. Process. 40, 45-52
  • Feng,D. , Aldrich, C., 2000. A Comparison of the flotation of ore from the Merensky Reef after wet and dry grinding. Int. J. Miner. Process, 60, 2, 115-129.
  • Guven, O., Ozdemir, O., Karaagaclioglu, I. E., Çelik, M.S., 2015, "Surface morphologies and floatability of sand-blasted quartz particles", Minerals Engineering, No. 70, , s. 1-7
  • Guven O., Celik, M.S., Drelich, J. 2015, “Flotation of methylated roughned glass particles and analysis of particle-bubble energy barrier” Minerals Engineering
  • Guven,O., Celik, M.S., 2016.”Interplay of particle shape and surface roughness to reach maximum flotation efficiencies depending on collector concentration”, Mineral Processing and Extractive Metallurgy Review, 37,6, 412-417.
  • Guven,O., Karakas, F., Kodrazi, N., Celik, M.S., 2016. Dependence of morphology on anionic flotation of alumina. Int. J. Miner. Process, 156, 69-74.
  • Guven,O., Serdengecti,M.T., Tunc,B., Ozdemir,O., Karaagaclioglu, İ.E., Celik, M.S., 2020. Effect of particle shape properties on selective separation of chromite from serpentine by flotation. Physicochemical Problems of Mineral Processing, 56, 5, 818-828.
  • Hassas, B.V., Guven, O., Bastürkcü, E., Çelik, M.S., 2021. “Morphological Changes of Glass Bead Particles upon an Abrasive Blasting as Characterized by Settling and Flotation Experiments”, Physicochemical Problems of Mineral Processingü 57 (2), 157-168.
  • Karakas, F., Hassas, V. B., 2016, “Effect of surface roughness on interaction of particles in flotation”, Physicochem. Probl. Miner. Process. 52, 18-34.
  • Koh, P.T.L., Hao, F.P., Smith, L.K., Chau, T.T., Bruckard, W.J., 2009. The effect ofparticle shape and hydrophobicity in flotation. Int. J. Miner. Process. 93 (2), 128–134.
  • Rahimi, M., Dehghani, F., Rezai, B., Aslani, M.R., 2012. Influence of the roughness and shape of quartz on their flotation kinetics . Int. J. Miner. Metall. Mater. , 19(4), 284-289.
  • Rezai, M., Rahimi, M., Aslani, M.R., Eslamian A. and Dehghani, F., 2010. Relationship Between Surface Roughness of Minerals and their Flotation Kinetics. In:Proceedings of the XI International Seminar on Mineral Processing Technology, Editors: R. Singh, A. Das, P.K. Banerjee, K.K. Bhattacharyya, N.G. Goswami, pp. 232–238.
  • Ulusoy, U., Yekeler, M., 2004. Variation of critical surface tension for wetting of minerals with roughness determined by Surtronic 3+ instrument. Int. J. Miner. Process. 74, 61–69.
  • Ulusoy, U., Yekeler, M., Hiçyılmaz, C., 2003., “Determination of shape, morphological and wettability properties of quartz and their correlations. Minerals Engineering, 16, 951-964.
  • Uysal, T., Guven, O., Ozdemir, O., Karaagaclioglu, İ.E., Tunc, B., Celik, M.S., 2021. Contribution of particle morphology on flotation and aggregation of sphalerite particles. Minerals Engineering, 165, 106860.
  • Verrelli, D.I., Koh, P.T.L., Bruckard, W.J., Schwarz, M.P., 2012. Variations in theinduction period for particle–bubble attachment. Minerals Engineering, 36–38, 219–230.
  • Verelli D.I., Bruckard, W., Koh, P.T., Schwarz, M. P., Follink, B., 2014, “Particle shape effects in flotation. Part 1: Microscale experimental observations”, Minerals Engineering, 58, 80-89.
  • Zhu, Z., Wang, D., Yang, B., Yin, W., Ardakani, M., Yao, J., Drelich, J.W., 2020. Effect of nano-sized roughness on the flotation of magnesite particles and particle-bubbleinteraction. Miner. Eng. 151.
Year 2021, Volume: 29 Issue: 3, 413 - 422, 31.12.2021
https://doi.org/10.31796/ogummf.975079

Abstract

References

  • Dang-Vu T., Hupka, J., Drzymala, J., 2006, “Impact of roughness on hydrophobicity of particles measured by the Washburn method”, Physicochem. Probl. Miner. Process. 40, 45-52
  • Feng,D. , Aldrich, C., 2000. A Comparison of the flotation of ore from the Merensky Reef after wet and dry grinding. Int. J. Miner. Process, 60, 2, 115-129.
  • Guven, O., Ozdemir, O., Karaagaclioglu, I. E., Çelik, M.S., 2015, "Surface morphologies and floatability of sand-blasted quartz particles", Minerals Engineering, No. 70, , s. 1-7
  • Guven O., Celik, M.S., Drelich, J. 2015, “Flotation of methylated roughned glass particles and analysis of particle-bubble energy barrier” Minerals Engineering
  • Guven,O., Celik, M.S., 2016.”Interplay of particle shape and surface roughness to reach maximum flotation efficiencies depending on collector concentration”, Mineral Processing and Extractive Metallurgy Review, 37,6, 412-417.
  • Guven,O., Karakas, F., Kodrazi, N., Celik, M.S., 2016. Dependence of morphology on anionic flotation of alumina. Int. J. Miner. Process, 156, 69-74.
  • Guven,O., Serdengecti,M.T., Tunc,B., Ozdemir,O., Karaagaclioglu, İ.E., Celik, M.S., 2020. Effect of particle shape properties on selective separation of chromite from serpentine by flotation. Physicochemical Problems of Mineral Processing, 56, 5, 818-828.
  • Hassas, B.V., Guven, O., Bastürkcü, E., Çelik, M.S., 2021. “Morphological Changes of Glass Bead Particles upon an Abrasive Blasting as Characterized by Settling and Flotation Experiments”, Physicochemical Problems of Mineral Processingü 57 (2), 157-168.
  • Karakas, F., Hassas, V. B., 2016, “Effect of surface roughness on interaction of particles in flotation”, Physicochem. Probl. Miner. Process. 52, 18-34.
  • Koh, P.T.L., Hao, F.P., Smith, L.K., Chau, T.T., Bruckard, W.J., 2009. The effect ofparticle shape and hydrophobicity in flotation. Int. J. Miner. Process. 93 (2), 128–134.
  • Rahimi, M., Dehghani, F., Rezai, B., Aslani, M.R., 2012. Influence of the roughness and shape of quartz on their flotation kinetics . Int. J. Miner. Metall. Mater. , 19(4), 284-289.
  • Rezai, M., Rahimi, M., Aslani, M.R., Eslamian A. and Dehghani, F., 2010. Relationship Between Surface Roughness of Minerals and their Flotation Kinetics. In:Proceedings of the XI International Seminar on Mineral Processing Technology, Editors: R. Singh, A. Das, P.K. Banerjee, K.K. Bhattacharyya, N.G. Goswami, pp. 232–238.
  • Ulusoy, U., Yekeler, M., 2004. Variation of critical surface tension for wetting of minerals with roughness determined by Surtronic 3+ instrument. Int. J. Miner. Process. 74, 61–69.
  • Ulusoy, U., Yekeler, M., Hiçyılmaz, C., 2003., “Determination of shape, morphological and wettability properties of quartz and their correlations. Minerals Engineering, 16, 951-964.
  • Uysal, T., Guven, O., Ozdemir, O., Karaagaclioglu, İ.E., Tunc, B., Celik, M.S., 2021. Contribution of particle morphology on flotation and aggregation of sphalerite particles. Minerals Engineering, 165, 106860.
  • Verrelli, D.I., Koh, P.T.L., Bruckard, W.J., Schwarz, M.P., 2012. Variations in theinduction period for particle–bubble attachment. Minerals Engineering, 36–38, 219–230.
  • Verelli D.I., Bruckard, W., Koh, P.T., Schwarz, M. P., Follink, B., 2014, “Particle shape effects in flotation. Part 1: Microscale experimental observations”, Minerals Engineering, 58, 80-89.
  • Zhu, Z., Wang, D., Yang, B., Yin, W., Ardakani, M., Yao, J., Drelich, J.W., 2020. Effect of nano-sized roughness on the flotation of magnesite particles and particle-bubbleinteraction. Miner. Eng. 151.
There are 18 citations in total.

Details

Primary Language Turkish
Journal Section Research Articles
Authors

Onur Güven 0000-0002-5267-9153

Publication Date December 31, 2021
Acceptance Date October 24, 2021
Published in Issue Year 2021 Volume: 29 Issue: 3

Cite

APA Güven, O. (2021). TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ. Eskişehir Osmangazi Üniversitesi Mühendislik Ve Mimarlık Fakültesi Dergisi, 29(3), 413-422. https://doi.org/10.31796/ogummf.975079
AMA Güven O. TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ. ESOGÜ Müh Mim Fak Derg. December 2021;29(3):413-422. doi:10.31796/ogummf.975079
Chicago Güven, Onur. “TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ”. Eskişehir Osmangazi Üniversitesi Mühendislik Ve Mimarlık Fakültesi Dergisi 29, no. 3 (December 2021): 413-22. https://doi.org/10.31796/ogummf.975079.
EndNote Güven O (December 1, 2021) TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 29 3 413–422.
IEEE O. Güven, “TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ”, ESOGÜ Müh Mim Fak Derg, vol. 29, no. 3, pp. 413–422, 2021, doi: 10.31796/ogummf.975079.
ISNAD Güven, Onur. “TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ”. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 29/3 (December 2021), 413-422. https://doi.org/10.31796/ogummf.975079.
JAMA Güven O. TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ. ESOGÜ Müh Mim Fak Derg. 2021;29:413–422.
MLA Güven, Onur. “TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ”. Eskişehir Osmangazi Üniversitesi Mühendislik Ve Mimarlık Fakültesi Dergisi, vol. 29, no. 3, 2021, pp. 413-22, doi:10.31796/ogummf.975079.
Vancouver Güven O. TANE MORFOLOJİSİNİN KABARCIK-TANE YAPIŞMA SÜRESİNE VE FLOTASYON VERİMİNE OLAN ETKİSİ. ESOGÜ Müh Mim Fak Derg. 2021;29(3):413-22.

20873  13565  13566 15461  13568    14913