Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması

Aytuğ Kumandaş; Erhan Burak Pancar

TR EN

Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması

Abstract

Bitümün çeşitli katkı maddeleri ile performansının iyileştirilmesi uzun yıllardan beri kullanılmakta olan bir yöntemdir. Araştırmacılar, yeni katkı maddelerinin üretilmesi veya mevcut katkı maddelerinin kombine edilerek kullanılması üzerine çalışmalar yürütmeye devam etmektedir. Bu çalışmada, bitüm modifikasyonu üzerine son iki yıl içerisinde yazılmış ve ilgili alandaki önemli dergilerde yayınlanmış makaleler derlenerek üzerinde çeşitli incelemeler yapılmıştır. Bu doğrultuda, çalışmaların yürütüldüğü ülkeler, çalışmalarda kullanılan katkı maddeleri ile bunların kullanım sıklıkları, kompozit modifikasyonda birlikte kullanılan katkı maddeleri ve tercih edilen deneysel yöntemler analiz edilmiştir. Böylece, bu alanda çalışmaya başlayacak yüksek lisans veya doktora öğrencileri ve araştırmacılar için güncel bilgileri içerisinde barındıran bir derleme yazılması hedeflenmiştir. Çalışmanın sonucunda, stiren-bütadien-stiren (SBS) katkı maddesinin halen literatürde büyük bir öneme sahip olduğu, bununla birlikte atık maddelerin bitüm modifikasyonunda kullanımın artık çalışmalarda odak noktası haline geldiği görülmüştür. Ayrıca, kompozit modifikasyonun getirdiği faydalar sebebiyle sıklıkla tercih edildiği anlaşılmış olup, deneysel yöntemlerde ise Dinamik Kesme Reometresi (DSR) cihazı ile yürütülen MSCR deneyinin yaygınlaştığı belirlenmiştir.

Keywords

Asfalt, Asfalt kaplama, Bitüm, Bitüm modifikasyonu

Up To Date Additives Used in Bitumen Modification: A Literature Review

Abstract

Improving the performance of bitumen with various additives is a method that has been used for many years. Researchers continue to work on the production of new additives or the use of existing additives in combination. In this study, articles written in the last two years on bitumen modification and published in important journals in the relevant field were reviewed and various analyzes were made on them. Accordingly, the countries where the studies were carried out, the additives used in the studies and their frequency of use, the additives used together in composite modification and the preferred experimental methods were analyzed. Thus, it is aimed to write a review that contains up-to-date information for graduate or doctoral students and researchers who will start working in this field. As a result of the study, it was seen that the styrene-butadiene-styrene (SBS) additive still has a great importance in the literature, however, the use of waste materials in bitumen modification has now become the focus of studies. In addition, it has been understood that composite modification is often preferred due to the benefits it brings, and it has been determined that the MSCR experiment carried out with the Dynamic Shear Rheometer (DSR) device has become widespread in experimental methods.

Keywords

Asphalt, Asphalt pavement, Bitumen, Bitumen modification

References

M.Z. Chen, B.B. Leng, S.P. Wu, Y. Sang, “Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders,” Construction and Building Materials, c. 66, s. ss. 286-298, 2014.
M. Attaelmanan, C.P. Feng, A.H. Al, “Laboratory evaluation of HMA with high density polyethylene as a modifier,” Construction and Building Materials, c. 25, s. 5, ss. 2764-2770, 2011.
H. Bahia, Bibliographies for Physical Properties of Asphalt Cement, in Strategic Highway Research Prog- ram. 1993, The Pennsylvania Transportation Institute: Washington, DC.
S. Oruc, B. Yilmaz, K. Sancak, “Effect of boron-containing additives on rheological properties of asphalt binder,” Road Materials and Pavement Design, c. 17, s. 4, ss. 810-824, 2016.
P. Ahmedzade, “The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen,” Construction and Building Materials, c. 38, s. ss. 285-291, 2013.
R.N. Hunter, A. Self, J. Read, The Shell Bitumen Handbook. Sixth Edition ed. 2015, London: ICE Publishing. 788.
D. Arslan, M. Guru, M.K. Cubuk, M. Cubuk, “Improvement of bitumen and bituminous mixtures performan- ces by triethylene glycol based synthetic polyboron,” Construction and Building Materials, c. 25, s. 10, ss. 3863-3868, 2011.
B.V. Kok, M. Yilmaz, M. Guler, “Evaluation of high temperature performance of SBS plus Gilsonite modified binder,” Fuel, c. 90, s. 10, ss. 3093-3099, 2011.
A. Perez-Lepe, F.J. Martinez-Boza, C. Gallegos, O. Gonzalez, M.E. Munoz, A. Santamaria, “Influence of the processing conditions on the rheological behaviour of polymer-modified bitumen,” Fuel, c. 82, s. 11, ss. 1339-1348, 2003.
M. Ameri, A. Mansourian, S.S. Ashani, G. Yadollahi, “Technical study on the Iranian Gilsonite as an additive for modification of asphalt binders used in pavement construction,” Construction and Building Materials, c. 25, s. 3, ss. 1379-1387, 2011.

J. Connan, M.K. Jones, D.E.G. Briggs, G. Eglington, E. Hagelberg, “Use and trade of bitumen in antiquity and prehistory: molecular archaeology reveals secrets of past civilizations,” Philosophical Transactions of the Royal Society of London. Series B: Biological Sciences, c. 354, s. 1379, ss. 33-50, 1999. 133 Aytuğ KUMANDAŞ, Erhan Burak PANCAR
D. Lesueur, “The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification,” Advances in Colloid and Interface Science, c. 145, s. 1-2, ss. 42-82, 2009.
D. Lesueur, J.-F. Gérard, P. Claudy, J.-M. Létoffé, J.-P. Planche, D. Martin, “Relationships between the structu- re and the mechanical properties of paving grade asphalt cements,” J. Assoc. Asphalt Paving Techn, c. 66, s. ss. 486-507, 1997.
M. Jasso, R. Hampl, O. Vacin, D. Bakos, J. Stastna, L. Zanzotto, “Rheology of conventional asphalt modified with SBS, Elvaloy and polyphosphoric acid,” Fuel Processing Technology, c. 140, s. ss. 172-179, 2015.
A. Topal, M. Yilmaz, B.V. Kok, N. Kuloglu, B. Sengoz, “Evaluation of Rheological and Image Properties of Styrene-Butadiene-Styrene and Ethylene-Vinyl Acetate Polymer Modified Bitumens,” Journal of Applied Polymer Science, c. 122, s. 5, ss. 3122-3132, 2011.
G.D. Airey, “Rheological evaluation of ethylene vinyl acetate polymer modified bitumens,” Construction and Building Materials, c. 16, s. 8, ss. 473-487, 2002.
U. Isacsson, X. Lu, “Testing and Appraisal of Polymer-Modified Road Bitumens - State-of-the-Art,” Materi- als and Structures, c. 28, s. 177, ss. 139-159, 1995.
Z. Suo, W.G. Wong, “Nonlinear properties analysis on rutting behaviour of bituminous materials with dif- ferent air void contents,” Construction and Building Materials, c. 23, s. 12, ss. 3492-3498, 2009.
S. Tayfur, H. Ozen, A. Aksoy, “Investigation of rutting performance of asphalt mixtures containing polymer modifiers,” Construction and Building Materials, c. 21, s. 2, ss. 328-337, 2007.
A.I. Al-Hadidy, Y.Q. Tan, “Mechanistic analysis of ST and SBS-modified flexible pavements,” Construction and Building Materials, c. 23, s. 8, ss. 2941-2950, 2009.
B. Sengoz, A. Topal, “Use of asphalt roofing shingle waste in HMA,” Construction and Building Materials, c. 19, s. 5, ss. 337-346, 2005.
M. Yilmaz, B.V. Kok, N. Kuloglu, “Effects of using asphaltite as filler on mechanical properties of hot mix asphalt,” Construction and Building Materials, c. 25, s. 11, ss. 4279-4286, 2011.
B. Brule, Y. Brion, A. Tanguy, Paving asphalt polymer blends: Relationships between composition, struc- ture and properties (with discussion), in Association of Asphalt Paving Technologists Proc. 1988. p. 41-64.
J. Collins, M. Bouldin, R. Gelles, A. Berker, “Improved performance of paving asphalts by polymer modifica- tion (with discussion),” Journal of the Association of Asphalt Paving Technologists, c. 60, s. ss. 43-79, 1991.
J.L. Goodrich, “Asphaltic binder rheology, asphalt concrete rheology and asphalt concrete mix properties (with discussion),” Journal of the Association of Asphalt Paving Technologists, c. 60, s. ss. 80-120, 1991.
G.N. King, H.W. King, P. Chaverot, J. Planche, O. Harders, Using European wheel-tracking and restrained tensile tests to validate SHRP performance-graded binder specifications for polymer modified asphalts, in 5th Eurobitume Congress. 1993: Stockholm, Sweden.
Y. Yidirim, “Polymer modified asphalt binders,” Construction and Building Materials, c. 21, s. 1, ss. 66-72, 2007.
KGM, Karayolu Teknik Şartnamesi. 2013: Ankara.
D. Nasr, R. Babagoli, M. Rezaei, P.R. Borujeni, “Evaluating the substitution potential of SBS with crumb rub- ber-polypropylene blends as asphalt binder and mixture modifiers,” Construction and Building Materials, c. 359, s. ss. 129503, 2022.
M. Zarei, E. Tabasi, M. Ghandehari, M. Rezaie, M.W. Khordehbinan, M. Al-Bahrani, “Effect of hospital waste pyrolysis hydrocarbon (HWPHC) on fracture behavior of Warm Mix asphalt (WMA) under freeze–thaw damage (FTD),” Construction and Building Materials, c. 359, s. ss. 129473, 2022.
M. Zarei, M.R. Taghizadeh, S.S. Moayedi, A. Naseri, M. Al-Bahrani, M.W. Khordehbinan, “Evaluation of frac- ture behavior of Warm mix asphalt (WMA) modified with hospital waste pyrolysis carbon black (HWPCB) under freeze–thaw damage (FTD) at low and intermediate temperatures,” Construction and Building Ma- terials, c. 356, s. ss. 129184, 2022.
M. Zarei, A. Salehikalam, E. Tabasi, A. Naseri, M. Worya Khordehbinan, M. Negahban, “Pure mode I fracture resistance of hot mix asphalt (HMA) containing nano-SiO2 under freeze–thaw damage (FTD),” Constructi- on and Building Materials, c. 351, s. ss. 128757, 2022.
D. Nasr, R. Babagoli, M. Mazrouei, “Evaluation of rheological behavior of asphalt binder modified by recyc- led polyethylene wax and crumb rubber,” Construction and Building Materials, c. 328, s. ss. 127069, 2022.
A. Khavandi Khiavi, M. Asadi, “Effect of specific heat capacity of aggregates and nano-graphite on sel - f-healing of hot mix asphalt under microwave radiation,” Construction and Building Materials, c. 328, s. ss. 127091, 2022.
M. Fakhri, E. Shahryari, T. Ahmadi, “Investigate the use of recycled polyvinyl chloride (PVC) particles in im- proving the mechanical properties of stone mastic asphalt (SMA),” Construction and Building Materials, c. 326, s. ss. 126780, 2022. 134 Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması OMUJEST, 2023, Cilt 3, Sayı 2, Sayfa 109-140
M. Fakhri, M.A. Norouzi, “Rheological and ageing properties of asphalt bio-binders containing lignin and waste engine oil,” Construction and Building Materials, c. 321, s. ss. 126364, 2022.
A.M. Yarahmadi, G. Shafabakhsh, A. Asakereh, “Laboratory investigation of the effect of nano Caco3 on rutting and fatigue of stone mastic asphalt mixtures,” Construction and Building Materials, c. 317, s. ss. 126127, 2022.
S. Fatemi, S.A. Saadatjoo, R. Babagoli, J. Bolouri Bazaz, “Rheological evaluation of asphalt binder modified by amorphous poly alpha olefin (APAO),” Construction and Building Materials, c. 314, s. ss. 125371, 2022.
R. Babagoli, A. Ameli, S. Asadi, “Effects of copolymers on rheological and performance of binders and stone matrix asphalt mixtures,” International Journal of Pavement Engineering, c. s. ss. 1-19, 2022.
H. Ziari, A. Habibnejad Korayem, M. Hajiloo, M. Shishehboran, A. Moniri, “Rutting-resistance investigation of amorphous carbon powder modified binder and asphalt mixture containing siliceous aggregates,” International Journal of Pavement Engineering, c. s. ss. 1-12, 2022.
M. Ameri, S.V. Abdipour, A.R. Yengejeh, M. Shahsavari, A.A. Yousefi, “Evaluation of rubberised asphalt mix- ture including natural Zeolite as a warm mix asphalt (WMA) additive,” International Journal of Pavement Engineering, c. s. ss. 1-12, 2022.
M. Jafari, A. Babazadeh, M. Shahri, “The role of stress sensitivity of modified binders with the same linear viscoelastic properties in evaluating rutting resistance of asphalt mixtures,” International Journal of Pa- vement Engineering, c. s. ss. 1-18, 2022.
M. Favakeh, S. Bazgir, M. Karbasi, M.Z. Alavi, A. Abdi, “Evaluation of elastomer–plastomer vulcanised mo- difiers for using as bitumen binder modifier,” International Journal of Pavement Engineering, c. 23, s. 2, ss. 148-159, 2022.
H. Yeşilçiçek, Ş. Oruç, M. Gülfer Bozdemir, “Characterization and rheological properties of asphalt binder with a novel tall oil-based boron additive to enhance asphalt performance,” Construction and Building Materials, c. 359, s. ss. 129510, 2022.
E. Yalcin, A. Demirbag, “Effects of modified binders obtained from different polymers on conventional and rheological properties,” Construction and Building Materials, c. 357, s. ss. 129366, 2022.
Ş. Oruç, B. Yılmaz, K. Sancak, “Characterization and rheological behavior of asphalt binder modified by a novel cyclic borate ester additive,” Construction and Building Materials, c. 348, s. ss. 128673, 2022.
B.V. Kök, B. İrhan, M. Yılmaz, E. Yalçın, “Research on the rheological properties of bitumen modified with waste photopolymer,” Construction and Building Materials, c. 346, s. ss. 128446, 2022.
E. Yalcin, A. Munir Ozdemir, B. Vural Kok, M. Yilmaz, B. Yilmaz, “Influence of pandemic waste face mask on rheological, physical and chemical properties of bitumen,” Construction and Building Materials, c. 337, s. ss. 127576, 2022.
A. Kumandaş, E. Çavdar, Ş. Oruç, E.B. Pancar, B.V. Kök, “Effect of WCO addition on high and low-temperatu- re performance of RET modified bitumen,” Construction and Building Materials, c. 323, s. ss. 126561, 2022.
T. Günay, P. Ahmedzade, S. Hassanpour-Kasanagh, A.M. Fainleib, O. Starostenko, “Effect of maleic anhyd- ride grafted and gamma-irradiated waste polypropylene on rheological properties of asphalt binder,” International Journal of Pavement Engineering, c. 23, s. 13, ss. 4819-4830, 2022.
A. Pandey, S. Sohel Islam, G.D. Ransinchung R.N, S.S. Ravindranath, “Quantifying the effect of SBS molecu- lar structure on the upper service temperature rheological properties of modified binders,” Construction and Building Materials, c. 352, s. ss. 128826, 2022.
S. Girimath, D. Singh, B. Rajan, “Performance evaluation and mechanistic-empirical design of bio-oil mo - dified asphalt mixes,” Construction and Building Materials, c. 325, s. ss. 126735, 2022.
P.K. Ashish, D. Singh, “Performance-based laboratory evaluation of asphaltic mixture containing asphalt binder-Carbon Nano Tube composite,” Road Materials and Pavement Design, c. 23, s. 6, ss. 1370-1389, 2022.
S.K. Patra, M. Panda, A.K. Das, P.K. Bhuyan, “Performance evaluation of surface-treated montmorillonite nanoclay-modified bitumen binder at high- and intermediate-temperature conditions,” Road Materials and Pavement Design, c. s. ss. 1-23, 2022.
B. Singh, P. Kumar, “Investigating the performance of polymer and warm mix modified asphalt binders and mixtures,” International Journal of Pavement Engineering, c. 23, s. 11, ss. 3691-3705, 2022.
A. Zahid, S. Ahmed, M. Irfan, “Experimental investigation of nano materials applicability in Hot Mix Asphalt (HMA),” Construction and Building Materials, c. 350, s. ss. 128882, 2022.
M.A. Tarar, A.H. Khan, Z.u. Rehman, “Evaluation of effects of soybean derived oil and aggregate petrology on the performance of asphalt mixes,” Road Materials and Pavement Design, c. 23, s. 2, ss. 308-334, 2022.
S. Abbas, S.B.A. Zaidi, I. Ahmed, “Performance evaluation of asphalt binders modified with waste engine oil and various additives,” International Journal of Pavement Engineering, c. s. ss. 1-13, 2022. 135 Aytuğ KUMANDAŞ, Erhan Burak PANCAR
M.F. Ahmad, S.B. Ahmed Zaidi, A. Fareed, N. Ahmad, I. Hafeez, “Assessment of sugar cane bagasse bio-oil as an environmental friendly alternative for pavement engineering applications,” International Journal of Pavement Engineering, c. 23, s. 8, ss. 2761-2772, 2022.
M.A. Nisar, S.B.A. Zaidi, A. Fareed, J.S. Carvajal-Munoz, I. Ahmed, “Performance evaluation of Nano wood ashes in asphalt binder and mixture,” International Journal of Pavement Engineering, c. 23, s. 10, ss. 3318- 3332, 2022.
A. Hazoor Ansari, F.M. Jakarni, R. Muniandy, S. Hassim, Z. Elahi, M. Meftah Ben Zair, “Effect of cup lump rubber as a sustainable bio-modifier on the properties of bitumen incorporating polyphosphoric acid,” Construction and Building Materials, c. 323, s. ss. 126505, 2022.
S.N.A. Jeffry, R. Putra Jaya, N. Abdul Hassan, H. Yaacob, M.Z.H. Mahmud, Z.H. Al-Saffar, “The influence of nano-carbon from coconut shell ash as modifier on the properties of bitumen,” Road Materials and Pa - vement Design, c. 23, s. 4, ss. 770-786, 2022.
A. Al-Sabaeei, M. Napiah, M. Sutanto, N.Z. Habib, N. Bala, I. Kumalasari, A. Ghaleb, “Application of nano silica particles to improve high-temperature rheological performance of tyre pyrolysis oil-modified bitu- men,” Road Materials and Pavement Design, c. 23, s. 9, ss. 1999-2017, 2022.
I.B. Joohari, F. Giustozzi, “Waste tyres crumb rubber as a sustainability enhancer for polymer-modified and hybrid polymer-modified bitumen,” International Journal of Pavement Engineering, c. 23, s. 12, ss. 4357-4371, 2022.
A.M. Al-Sabaeei, M.B. Napiah, M.H. Sutanto, W.S. Alaloul, N.I.M. Yusoff, F.H. Khairuddin, A.M. Memon, “Evalu- ation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt,” Inter- national Journal of Pavement Engineering, c. 23, s. 11, ss. 4007-4022, 2022.
I.A. Abdalfattah, W.S. Mogawer, K. Stuart, “Recycled polyethylene (RPE) modified asphalt mixtures: Per - formance predictions using pavement Mechanistic-Empirical design and evaluation of return on invest- ment,” Construction and Building Materials, c. 356, s. ss. 129164, 2022.
M. Elwardany, J. Habbouche, A. Andriescu, D.J. Mensching, E.Y. Hajj, M. Piratheepan, “Comprehensive per- formance evaluation of high polymer-modified asphalt binders beyond linear viscoelastic rheological surrogates,” Construction and Building Materials, c. 351, s. ss. 128902, 2022.
Y. Wang, P. Polaczyk, J. He, H. Lu, R. Xiao, B. Huang, “Dispersion, compatibility, and rheological properties of graphene-modified asphalt binders,” Construction and Building Materials, c. 350, s. ss. 128886, 2022.
A. Ali, S.F. Kabir, B. Al-Badr, A. Alfalah, Z. Xie, C. Decarlo, M. Elshaer, Y. Mehta, “Laboratory performance of dense graded asphalt mixtures prepared using highly polymer modified binders containing corn oil as softening agent,” Construction and Building Materials, c. 345, s. ss. 128336, 2022.
K. Zhang, H. Zhao, S.C. Wang, “Upcycle olive pomace as antioxidant and recycling agent in asphalt paving materials,” Construction and Building Materials, c. 330, s. ss. 127217, 2022.
S. Aldagari, S.F. Kabir, E.H. Fini, “A comparative study on efficacy of waste plastic and waste Rubberin bitumen,” Construction and Building Materials, c. 325, s. ss. 126724, 2022.
P. Hajikarimi, A. Sadat Hosseini, E.H. Fini, “Evaluation of the compatibility of waste plastics and bitumen using micromechanical modeling,” Construction and Building Materials, c. 317, s. ss. 126107, 2022.
S. Rani, R. Ghabchi, S.A. Ali, M. Zaman, E.A. O’Rear, “Moisture-induced damage potential of asphalt mixes containing polyphosphoric acid and antistripping agent,” Road Materials and Pavement Design, c. 23, s. 12, ss. 2818-2838, 2022.
J.J. García Mainieri, P. Singhvi, H. Ozer, B.K. Sharma, I.L. Al-Qadi, “Linear and nonlinear viscoelastic parame- ters of asphalt binders modified with softening agents,” Road Materials and Pavement Design, c. s. ss. 1-20, 2022.
S. Saadeh, Y. Al-Zubi, P. Katawal, B. Zaatarah, E. Fini, “Biochar effects on the performance of conventional and rubberized HMA,” Road Materials and Pavement Design, c. 24, s. 1, ss. 156-172, 2023.
R. Ghabchi, M.P. Pereira Castro, “Characterisation of a hybrid plant-based asphalt binder replacement with high reactive phenolic monomer content,” International Journal of Pavement Engineering, c. 23, s. 13, ss. 4675-4696, 2022.
J. Zhang, M.S. Sakhaeifar, D.N. Little, “Characterisation of rheological properties of sulfur-extended asphalt with/without crumb rubber,” International Journal of Pavement Engineering, c. 23, s. 5, ss. 1491- 1499, 2022.
A.A. Jamrah, M.E. Kutay, “A new rheological approach to evaluating the aged performance of Crumb Rub- ber Modified binders,” International Journal of Pavement Engineering, c. 23, s. 6, ss. 1897-1910, 2022.
Y. Meng, Z. Wang, J. Lei, Y. Liao, X. Zhao, Y. Qin, G. Fang, C. Zhang, “Study on aging resistance and micro characteristics of bio-asphalt/TLA composite modified asphalt binder,” Construction and Building Mate- rials, c. 359, s. ss. 129566, 2022. 136 Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması OMUJEST, 2023, Cilt 3, Sayı 2, Sayfa 109-140
J. Ren, X. Zhang, C. Peng, Y. Wang, Y. Wang, H. Zhao, X. Xu, L. Xia, C. Wang, G. Li, Z. Zhao, J. Chen, J. Wang, “Short-term aging characteristics and mechanisms of SBS-modified bio-asphalt binder considering ti - me-dependent effect,” Construction and Building Materials, c. 352, s. ss. 129048, 2022.
S. Chen, Q. Liu, H. Wu, C. Yang, X. Gong, S. Wu, Y. Li, “Simultaneous enhancement of the thermal oxygen and ultraviolet aging resistance of asphalt by incorporating antioxidant intercalated layered double hyd- roxide,” Construction and Building Materials, c. 349, s. ss. 128743, 2022.
H. Duan, J. Long, H. Zhang, H. Luo, J. Cao, “Effects of different carriers for zinc oxide (ZnO) particles on microstructure of ZnO/layered silicate composite and aging resistance of composite modified asphalt,” Construction and Building Materials, c. 349, s. ss. 128773, 2022.
H. Wang, N. Li, T. Xu, “Aging effects on microstructures and micromechanical properties of vulcanized eu- commia ulmoides gum modified bitumen,” Construction and Building Materials, c. 346, s. ss. 128432, 2022.
Y. Tan, J. Zhang, G. Zou, H. Qin, “Aging characterization of rheology and morphology evolution of SBS-mo- dified asphalt,” Construction and Building Materials, c. 342, s. ss. 128027, 2022.
C. Li, X. Xie, L. Wang, Y. Guo, L. Zhang, Z. Xue, “Evaluation of the effect of thermal oxygen aging on base and SBS-modified bitumen at micro and macroscales,” Construction and Building Materials, c. 324, s. ss. 126623, 2022.
D. Zhang, Y. Zheng, G. Yuan, G. Qian, H. Zhang, Z. You, P. Li, “Chemical characteristics analyze of SBS-mo- dified bitumen containing composite nanomaterials after aging by FTIR and GPC,” Construction and Buil- ding Materials, c. 324, s. ss. 126522, 2022.
S. Chen, B. Zhang, X. He, Y. Su, Q. Liu, H. Xu, “Research on mechanical-activated nanoscale bentonite and surface aging behavior of its modified asphalt,” Construction and Building Materials, c. 321, s. ss. 126356, 2022.
S. Chen, H. Xu, X. He, Y. Su, B. Zhang, Q. Liu, “Oil-grinded recycled kapok fiber as a bio-packing for eco-friendly modified asphalt and its aging resistance behavior,” Construction and Building Materials, c. 320, s. ss. 126293, 2022.
D. Zhang, Z. Huang, G. Yuan, Y. Zheng, G. Qian, Z. You, H. Zhang, “Research on the anti-aging mechanism of SBS-modified asphalt compounded with multidimensional nanomaterials based on atomic force mic- roscopy,” Construction and Building Materials, c. 317, s. ss. 125808, 2022.
G. Cuciniello, P. Leandri, M. Losa, G. Airey, “Effects of ageing on the damage tolerance of polymer modi - fied bitumens investigated through the LAS test and fluorescence microscopy,” International Journal of Pavement Engineering, c. 23, s. 4, ss. 1083-1094, 2022.
J. Zhang, A. He, B. Xie, J. Wang, C. Yan, “Characterization of various modified asphalts using force ductility test with “8“ shaped mold and straight mold,” Construction and Building Materials, c. 356, s. ss. 129251, 2022.
L. Cheng, L. Zhang, Y. Lei, Y. Ma, C. Yan, “Effect of the laboratory short-term aging temperature on the chemical and rheological characteristics of high modulus asphalts,” Construction and Building Materials, c. 314, s. ss. 125569, 2022.
X. Zhu, M. Miljković, Y. Wang, G. Hao, “Property transitions of neat and styrene–butadiene-styrene (SB - S)-modified asphalt binders from small, medium to large-amplitude oscillatory shears,” International Journal of Pavement Engineering, c. s. ss. 1-19, 2022.
M. Rochlani, S. Leischner, D. Wareham, S. Caro, G.C. Falla, F. Wellner, “Investigating the performance-rela- ted properties of crumb rubber modified bitumen using rheology-based tests,” International Journal of Pavement Engineering, c. 23, s. 3, ss. 877-887, 2022.
A. Sreeram, A. Filonzi, S. Komaragiri, K. Lakshmi Roja, E. Masad, A. Bhasin, “Assessing impact of chemical compatibility of additives used in asphalt binders: A case study using plastics,” Construction and Building Materials, c. 359, s. ss. 129349, 2022.
Z. Xu, H. Wang, T. Xu, “Bituminous modifier selection and effects of dimethyl sulfoxide pretreated graphe- ne contents on bituminous properties,” Construction and Building Materials, c. 343, s. ss. 128145, 2022.
X. Jiang, P. Li, Z. Ding, L. Yue, H. Li, H. Bing, J. Zhang, “Physical, chemical and rheological investigation and optimization design of asphalt binders partially replaced by bio-based resins,” Construction and Building Materials, c. 350, s. ss. 128845, 2022.
Y. Meng, L. Zhan, C. Hu, Y. Tang, D. Großegger, X. Ye, “Research on modification mechanism and perfor - mance of an innovative bio-based polyurethane modified asphalt: A sustainable way to reducing depen- dence on petroleum asphalt,” Construction and Building Materials, c. 350, s. ss. 128830, 2022.
C. Yan, L. Yuan, X. Yu, S. Ji, Z. Zhou, “Characterizing the fatigue resistance of multiple modified asphalts using time sweep test, LAS test and elastic recovery test,” Construction and Building Materials, c. 322, s. ss. 125806, 2022. 137 Aytuğ KUMANDAŞ, Erhan Burak PANCAR
P. Cong, A. Zhang, W. Ge, Y. Cheng, “Study on macroscopic properties and microstructure of thermosetting polyurethane asphalt binder (PAB) based on curing kinetics,” Construction and Building Materials, c. 333, s. ss. 127347, 2022.
Y. Peng, Z. Yu, Y. Long, Y. Li, “Experimental investigation on the effects of a new anti-stripping additive on performance properties of asphalt and its mixtures,” Construction and Building Materials, c. 353, s. ss. 129173, 2022.
M. Rafiq Kakar, P. Mikhailenko, Z. Piao, L.D. Poulikakos, “High and low temperature performance of polyet- hylene waste plastic modified low noise asphalt mixtures,” Construction and Building Materials, c. 348, s. ss. 128633, 2022.
A.L. Manfro, J.V. Staub de Melo, J.A. Villena Del Carpio, W.B. Broering, “Permanent deformation performan- ce under moisture effect of an asphalt mixture modified by calcium carbonate nanoparticles,” Construc- tion and Building Materials, c. 342, s. ss. 128087, 2022.
Z. Zhao, S. Wu, Q. Liu, J. Xie, C. Yang, F. Wang, P. Wan, “Recycling waste disposable medical masks in impro- ving the performance of asphalt and asphalt mixtures,” Construction and Building Materials, c. 337, s. ss. 127621, 2022.
Z. Liu, Z. Wang, “Development of terminal blend rubber and SBS modified asphalt: A case study,” Constru- ction and Building Materials, c. 334, s. ss. 127459, 2022.
Y. Mamuye, M.-C. Liao, N.-D. Do, “Nano-Al2O3 composite on intermediate and high temperature proper- ties of neat and modified asphalt binders and their effect on hot mix asphalt mixtures,” Construction and Building Materials, c. 331, s. ss. 127304, 2022.
A. Chen, Q. Deng, Y. Li, T. bai, Z. Chen, J. Li, J. Feng, F. Wu, S. Wu, Q. Liu, C. Li, “Harmless treatment and envi- ronmentally friendly application of waste tires—TPCB/TPO composite-modified bitumen,” Construction and Building Materials, c. 325, s. ss. 126785, 2022.
Y. Meng, J. Lei, R. Zhang, X. Yang, Q. Zhao, Y. Liao, Y. Hu, “Effect of geopolymer as an additive on the mec- hanical performance of asphalt,” Road Materials and Pavement Design, c. 23, s. 11, ss. 2466-2485, 2022.
A. Filonzi, S. Komaragiri, K. Lakshmi Roja, A. Sreeram, A. Bhasin, E. Masad, “A comprehensive evaluation of mixture and binder properties to explore the use of low-density polyethylene (LDPE) as an asphalt modifier and co-modifier,” International Journal of Pavement Engineering, c. s. ss. 1-11, 2022.
I. Holleran, E. Masad, D.J. Wilson, J. Malmstrom, G. Holleran, E. Alrashydah, “Effect of reactive ethylene terpolymer modification on bitumen’s microstructure, rheology, and porous asphalt mix properties,” In- ternational Journal of Pavement Engineering, c. s. ss. 1-21, 2022.
A.M. Adnan, X. Luo, C. Lü, J. Wang, Z. Huang, “Physical properties of graphene-oxide modified asphalt and performance analysis of its mixtures using response surface methodology,” International Journal of Pavement Engineering, c. 23, s. 5, ss. 1378-1392, 2022.
J. Huang, G. Shiva Kumar, J. Ren, Y. Sun, Y. Li, C. Wang, “Towards the potential usage of eggshell powder as bio-modifier for asphalt binder and mixture: workability and mechanical properties,” International Journal of Pavement Engineering, c. 23, s. 10, ss. 3553-3565, 2022.
Z. Ju, D. Ge, Z. Wu, Y. Xue, S. Lv, Y. Li, X. Fan, “The performance evaluation of high content bio-asphalt modified with polyphosphoric acid,” Construction and Building Materials, c. 361, s. ss. 129593, 2022.
S. Cui, N. Guo, L. Wang, Z. You, Y. Tan, Z. Guo, X. Luo, Z. Chen, “Effect of Freeze–Thaw cycles on the pave- ment performance of SBS modified and composite crumb rubber modified asphalt mixtures,” Constructi- on and Building Materials, c. 342, s. ss. 127799, 2022.
K. Yan, G. Li, Q. Li, A. Diab, L. You, M. Wang, “Compound modification of asphalt mixture using ethyle - ne-vinyl acetate copolymer and amorphous poly alpha olefin,” Construction and Building Materials, c. 341, s. ss. 127705, 2022.
K. Yan, Y. Li, Z. Long, L. You, M. Wang, M. Zhang, A. Diab, “Mechanical behaviors of asphalt mixtures modi- fied with European rock bitumen and waste cooking oil,” Construction and Building Materials, c. 319, s. ss. 125909, 2022.
X. Shi, H. Zhang, X. Bu, G. Zhang, H. Zhang, H. Kang, “Performance evaluation of BDM/unsaturated polyes- ter resin-modified asphalt mixture for application in bridge deck pavement,” Road Materials and Pave - ment Design, c. 23, s. 3, ss. 684-700, 2022.
A. Subhy, D. Lo Presti, G. Airey, P. Edwards, “Rubberised stone mastic asphalt mixtures: a performance-re- lated evaluation,” Road Materials and Pavement Design, c. s. ss. 1-21, 2022.
T. López-Montero, R. Miró, A. Martínez, “Effect of the use of Marpol waste as a partial replacement of the binder for the manufacture of more sustainable bituminous mixtures,” International Journal of Pavement Engineering, c. s. ss. 1-15, 2022. 138 Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması OMUJEST, 2023, Cilt 3, Sayı 2, Sayfa 109-140
A.M. Adnan, C. Lü, X. Luo, J. Wang, G. Liu, “Fracture properties and potential of asphalt mixtures containing graphene oxide at low and intermediate temperatures,” International Journal of Pavement Engineering, c. s. ss. 1-17, 2022.
J. Ren, D. Li, Y. Xu, J. Huang, W. Liu, “Fatigue behaviour of rock asphalt concrete considering moisture, high-temperature, and stress level,” International Journal of Pavement Engineering, c. 23, s. 13, ss. 4638- 4648, 2022.
K. Yan, S. Wang, D. Ge, J. Chen, S. Tian, H. Sun, “Laboratory performance of asphalt mixture with waste tyre rubber and APAO modified asphalt binder,” International Journal of Pavement Engineering, c. 23, s. 1, ss. 59-69, 2022.
M. Shahin, T.U. Ahmed, M.N. Bari, M.A. Sobhan, “Effects of soaking on compressive strength of recycled polymer modified asphalt,” International Journal of Pavement Engineering, c. 23, s. 5, ss. 1634-1644, 2022.
H. Hao, A. Zhang, Y. Cheng, P. Cong, “The modification mechanisms of silane coupling agent (SCA) on the physical properties of thermosetting polyurethane asphalt binder (PUAB),” Construction and Building Materials, c. 350, s. ss. 128836, 2022.
H. Liu, Z. Zhang, Y. Zhu, J. Sun, L. Wang, T. Huang, L. Chen, “Modification of asphalt using polyurethanes synthesized with different isocyanates,” Construction and Building Materials, c. 327, s. ss. 126959, 2022.
N. Xu, H. Wang, Y. Chen, M. Miljković, P. Feng, H. Ding, “Thermal storage stability and rheological pro - perties of multi-component styrene-butadiene-styrene composite modified bitumen,” Construction and Building Materials, c. 322, s. ss. 126494, 2022.
B. Liang, Y. Chen, F. Lan, J. Zheng, “Evaluation of rheological and aging behavior of modified asphalt based on activation energy of viscous flow,” Construction and Building Materials, c. 321, s. ss. 126347, 2022.
J. Sun, Z. Zhang, L. Wang, H. Liu, X. Ban, J. Ye, “Investigation on the epoxy/polyurethane modified asphalt binder cured with bio-based curing agent: Properties and optimization,” Construction and Building Mate- rials, c. 320, s. ss. 126221, 2022.
C. Xia, Y. Guo, S. Lv, B. Liu, T. Liu, S. Zhao, Y. Liu, “Investigation on performance and mechanism of graf - ting activated waste leather powder modified asphalt,” Construction and Building Materials, c. 320, s. ss. 126208, 2022.
M. Jia, A. Sha, J. Lin, Z. Zhang, B. Qi, D. Yuan, “Polyurethane asphalt binder: a promising candidate for steel bridge deck-paving material,” International Journal of Pavement Engineering, c. 23, s. 11, ss. 3920-3929, 2022.
Z. Hong, K. Yan, M. Wang, J. Yuan, D. Ge, J. Liu, “The laboratory performance of asphalt mixture with ther- moplastic polyurethane (TPU) and amorphous poly alpha olefin (APAO) compound modified asphalt bin- der,” Construction and Building Materials, c. 349, s. ss. 128742, 2022.
J. Li, S. Wang, Y. Liu, H. Lin, R. Pei, Y. Muhammad, “Performance and mechanism evaluation of dopami - ne-hexamethylene diamine-iron tetraoxide composite rubber powder incorporated styrene-butadie - ne-styrene modified asphalt,” Construction and Building Materials, c. 351, s. ss. 128953, 2022.
J. Li, S. Wang, Y. Muhammad, H. Zhang, Q. Qiao, “Synthesis of Hydroxyapatite-Polydopamine-Rubber pow- der modifier via in-situ growth strategy for the designing of HAP-PDA-RP/SBS modified asphalt,” Const- ruction and Building Materials, c. 345, s. ss. 128361, 2022.
S. Xing, Y. Muhammad, Y. Chen, Z. Li, D. Ren, Z. Zhao, J. Li, “Preparation and performance evaluation of surface-modified polyacrylonitrile fiber and SBS composite modified asphalt binder based on bionic hie- rarchy,” Construction and Building Materials, c. 326, s. ss. 126866, 2022.
T. Bai, F. Wu, Y. Zhang, C. Mao, G. Wang, Y. Wu, H. Bai, Y. Li, “Sulfur modification with dipentene and ethy- lhexyl acrylate to enhance asphalt mixture performance,” Construction and Building Materials, c. 343, s. ss. 128086, 2022.
Z. Zhao, S. Wu, Q. Liu, C. Yang, Y. Zou, P. Wan, “Feasibility assessment of CeO2 nanoparticles as aging-re- sistant agent of asphalt,” Construction and Building Materials, c. 330, s. ss. 127245, 2022.
R. Gallu, F. Méchin, J.-F. Gérard, F. Dalmas, “Influence of the chain extender of a segmented polyurethane on the properties of polyurethane-modified asphalt blends,” Construction and Building Materials, c. 328, s. ss. 127061, 2022.
N.H. Carreño Gómez, O. Fleischel, M. Oeser, “Thermal ageing behaviour of isocyanate-based bitumen additive,” Construction and Building Materials, c. 327, s. ss. 126932, 2022.
G. Bian, L. Qi, J. Liu, X. Wang, X. Xu, Z. Wang, “Effects of tetraethyl orthosilicate on rheological behaviors of crumb rubber modified asphalt,” Construction and Building Materials, c. 325, s. ss. 126807, 2022.
J. Dai, F. Ma, Z. Fu, C. Li, D. Wu, K. Shi, W. Dong, Y. Wen, M. Jia, “Assessing the direct interaction of asphalt binder with stearic acid/palmitic acid binary eutectic phase change material,” Construction and Building Materials, c. 320, s. ss. 126251, 2022. 139 Aytuğ KUMANDAŞ, Erhan Burak PANCAR
C. Li, F. Ma, Z. Fu, J. Dai, Y. Wen, K. Shi, “Using Cereclor plasticizer to modify the virgin asphalt binder: A case of rheological properties improvement,” Construction and Building Materials, c. 318, s. ss. 126039, 2022.
I. Camargo, B. Hofko, J. Mirwald, “Effect of DLTDP and furfural on asphalt binders: Optimal dosage and PG grading,” Construction and Building Materials, c. 314, s. ss. 125489, 2022.
X. Yang, G. Wang, M. Liang, T. Yuan, H. Rong, “Effect of aluminum hydroxide (ATH) on flame retardancy and smoke suppression properties of SBS-modified asphalt,” Road Materials and Pavement Design, c. 24, s. 1, ss. 173-190, 2023.
Z. Fu, S. Liu, F. Ma, X. Guo, C. Li, J. Dai, M. Lin, “Low-temperature rheological properties and micro-mechanism of DIBCH plasticizer modified bitumen,” International Journal of Pavement Engineering, c. s. ss. 1-11, 2021.
Z. Fu, K. Shi, F. Ma, R.-m. Song, L. Chen, J.-s. Dai, W.-q. Shen, “Rheological properties of dioctyl adipate-mo- dified asphalt binder,” International Journal of Pavement Engineering, c. 23, s. 8, ss. 2644-2653, 2022.
J. Xu, Z. Guo, G. Lu, Z. Fan, D. Wang, M. Oeser, “Reclamation of waste oils in asphalt modification towards enhanced low-temperature performance of pavement in cold region,” International Journal of Pavement Engineering, c. s. ss. 1-16, 2022.
Z. Zhang, L. Chen, J. Peng, J. Sun, D. Zhang, X. Li, F. Wen, H. Liu, “Preparation and properties of a novel high-viscosity modified bitumen,” Construction and Building Materials, c. 344, s. ss. 128183, 2022.
Y. Zhu, G. Xu, T. Ma, J. Fan, S. Li, “Performances of rubber asphalt with middle/high content of waste tire crumb rubber,” Construction and Building Materials, c. 335, s. ss. 127488, 2022.
F. Xiao, Q. Zong, J. Wang, J. Chen, J. Liu, “Storage stability characterization and improvement of SBS and crumb rubber composite modified asphalt,” Road Materials and Pavement Design, c. 23, s. 3, ss. 509-526, 2022.
Q. Liu, J. Liu, B. Yu, J. Zhang, J. Pei, “Evaluation and optimization of asphalt binder and mixture modified with high activated crumb rubber content,” Construction and Building Materials, c. 314, s. ss. 125676, 2022.
C. Yan, W. Huang, J. Xu, H. Yang, Y. Zhang, H.U. Bahia, “Quantification of re-refined engine oil bottoms (REOB) in asphalt binder using ATR-FTIR spectroscopy associated with partial least squares (PLS) regres- sion,” Road Materials and Pavement Design, c. 23, s. 4, ss. 958-972, 2022.
Q. Liu, J. Liu, B. Yu, J. Zhang, J. Pei, Y. Wen, “Preparation and investigation on terminal blend asphalt binders with high content of activated crumb rubber,” International Journal of Pavement Engineering, c. s. ss. 1-15, 2021.
M. Li, C. Luo, L. Zhu, H. Li, P. Cong, Y. Feng, L. Yan, “A novel epoxy-terminated polyethylene modified asphalt with low-viscosity and high storage stability,” Construction and Building Materials, c. 335, s. ss. 127473, 2022.
K. Hu, C. Yu, Q. Yang, Z. Li, W. Zhang, T. Zhang, Y. Feng, “Mechanistic study of graphene reinforcement of rheological performance of recycled polyethylene modified asphalt: A new observation from molecular dynamics simulation,” Construction and Building Materials, c. 320, s. ss. 126263, 2022.
M. Tušar, M.R. Kakar, L.D. Poulikakos, E. Pasquini, A. Baliello, M. Pasetto, L. Porot, D. Wang, A. Cannone Fal- chetto, D. Dalmazzo, D. Lo Presti, G. Giancontieri, A. Varveri, R. Veropalumbo, N. Viscione, K. Vasconcelos, A. Carter, “RILEM TC 279 WMR round robin study on waste polyethylene modified bituminous binders: advantages and challenges,” Road Materials and Pavement Design, c. s. ss. 1-29, 2022.
C. Li, J. Gong, R. Zhao, Z. Xi, Q. Wang, H. Xie, “Laboratory performance of recycled polyethylene modified epoxy asphalt binders,” International Journal of Pavement Engineering, c. s. ss. 1-11, 2022.
E.S. Okhotnikova, Y.M. Ganeeva, I.N. Frolov, T.N. Yusupova, G.R. Fazylzyanova, “Structural characterization and application of bitumen modified by recycled polyethylenes,” Construction and Building Materials, c. 316, s. ss. 126118, 2022.
I. Binti Joohari, F. Giustozzi, “Oscillatory shear rheometry of hybrid polymer-modified bitumen using mul- tiple stress creep and recovery and linear amplitude sweep tests,” Construction and Building Materials, c. 315, s. ss. 125791, 2022.
Z. Hong, K. Yan, M. Wang, L. You, D. Ge, “Low-density polyethylene/ethylene–vinyl acetate compound mo- dified asphalt: Optimal preparation process and high-temperature rheological properties,” Construction and Building Materials, c. 314, s. ss. 125688, 2022.
B. Fethiza Ali, K. Soudani, S. Haddadi, “Effect of waste plastic and crumb rubber on the thermal oxidative aging of modified bitumen,” Road Materials and Pavement Design, c. 23, s. 1, ss. 222-233, 2022.
T. Xia, X. Chen, J. Xu, W. Chen, X. Huang, Y. Li, “Properties of bitumen modified by polyethylene and polyet- hylene glycol with different molecular weights,” International Journal of Pavement Engineering, c. 23, s. 11, ss. 3941-3948, 2022.
Z. Ren, L. Huang, Z. Li, Z. Gu, Y. Tan, “Effect of reclaimed bio-oil and waste crumb rubber on bitumen visco- elasticity,” International Journal of Pavement Engineering, c. s. ss. 1-11, 2022.
Y. Sheng, A.T. Ahmed, H. Jia, Y. Wu, P. Guo, Y. Li, Y. Qiao, “Preparation and characterization of low flammable asphalt for tunnel pavements,” Construction and Building Materials, c. 359, s. ss. 129559, 2022. 140 Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması OMUJEST, 2023, Cilt 3, Sayı 2, Sayfa 109-140
X. Zha, R. Lv, H. Hu, H. Chen, Z. Wang, “Preparation and experimental research on the properties of neod- ymium iron boron magnetic powder modified asphalt,” Construction and Building Materials, c. 321, s. ss. 126392, 2022.
P. Zhao, X. Song, M. Dong, H. Sun, W. Wu, R. Zhang, M. Sun, X. Zhao, “Preparation and characterization of CQDs/SBS composites and its application performance as asphalt modifier,” Construction and Building Materials, c. 320, s. ss. 126312, 2022.
M. Han, Y. Tan, A. Meng, X. Xiong, Y. Wang, H. Lv, “Preparation of chemical-physical hybrid crosslinking double network gel composite incorporated SBS modified asphalt,” International Journal of Pavement Engineering, c. s. ss. 1-15, 2022.
Q. Lv, J. Lu, X. Tang, Y. Hu, C. Yan, “Evaluation of the moisture resistance of rubberized asphalt using BBS/ UTM bonding test, TSR and HWT test,” Construction and Building Materials, c. 340, s. ss. 127831, 2022.
Z. Yang, L. Wang, X. Bin, D. Cao, J. Li, K. Zhao, “Performance of SBS modifier-crumb rubber composite modified asphalt used as an anti-wear layer of perpetual pavement,” International Journal of Pavement Engineering, c. 23, s. 12, ss. 4097-4111, 2022.
D. Ren, Y. Muhammad, Y. Chen, Y. Liu, C. Mao, S. Xing, R. Pei, Z. Zhao, J. Li, “Effect of PAN fiber with bionic layered surface structure generated in situ by Fenton reaction on performance of SBS/RP asphalt binder,” Construction and Building Materials, c. 352, s. ss. 129001, 2022.
W. Zhang, L. Zou, F. Chen, C. Yang, Y. Li, X. Yan, J. Zang, J. Liu, “Evaluation method of storage stability of SBS modified bitumen based on dynamic rheological properties,” Construction and Building Materials, c. 323, s. ss. 126615, 2022.
F. Ma, Y. Wang, Z. Fu, Y. Tang, J. Dai, C. Li, W. Dong, “Thermal ageing mechanism of a natural rock-modified asphalt binder using Fourier Transform Infrared Spectroscopy analysis,” Construction and Building Mate- rials, c. 335, s. ss. 127494, 2022.

Details

Primary Language

Turkish

Subjects

Transportation Engineering

Journal Section

Review

Authors

Aytuğ Kumandaş ^*
0000-0003-1765-9963
Türkiye

Erhan Burak Pancar
0000-0002-7958-3434
Türkiye

Publication Date

September 29, 2023

Submission Date

January 2, 2023

Acceptance Date

September 18, 2023

Published in Issue

Year 2023 Volume: 3 Number: 2

IZ

https://izlik.org/JA89PC59PR

APA

Kumandaş, A., & Pancar, E. B. (2023). Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması. OMÜ Mühendislik Bilimleri Ve Teknolojisi Dergisi, 3(2), 109-140. https://izlik.org/JA89PC59PR

AMA

1.Kumandaş A, Pancar EB. Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması. OMUJEST. 2023;3(2):109-140. https://izlik.org/JA89PC59PR

Chicago

Kumandaş, Aytuğ, and Erhan Burak Pancar. 2023. “Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması”. OMÜ Mühendislik Bilimleri Ve Teknolojisi Dergisi 3 (2): 109-40. https://izlik.org/JA89PC59PR.

EndNote

Kumandaş A, Pancar EB (September 1, 2023) Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması. OMÜ Mühendislik Bilimleri ve Teknolojisi Dergisi 3 2 109–140.

IEEE

[1]A. Kumandaş and E. B. Pancar, “Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması”, OMUJEST, vol. 3, no. 2, pp. 109–140, Sept. 2023, [Online]. Available: https://izlik.org/JA89PC59PR

ISNAD

Kumandaş, Aytuğ - Pancar, Erhan Burak. “Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması”. OMÜ Mühendislik Bilimleri ve Teknolojisi Dergisi 3/2 (September 1, 2023): 109-140. https://izlik.org/JA89PC59PR.

JAMA

1.Kumandaş A, Pancar EB. Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması. OMUJEST. 2023;3:109–140.

MLA

Kumandaş, Aytuğ, and Erhan Burak Pancar. “Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması”. OMÜ Mühendislik Bilimleri Ve Teknolojisi Dergisi, vol. 3, no. 2, Sept. 2023, pp. 109-40, https://izlik.org/JA89PC59PR.

Vancouver

1.Aytuğ Kumandaş, Erhan Burak Pancar. Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması. OMUJEST [Internet]. 2023 Sep. 1;3(2):109-40. Available from: https://izlik.org/JA89PC59PR

Bitüm Modifikasyonunda Kullanılan Güncel Katkı Maddeleri: Bir Literatür Araştırması

Abstract

Keywords

Up To Date Additives Used in Bitumen Modification: A Literature Review

Abstract

Keywords

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

IZ

Cite