Selüloz Nanokristaller: Sentez prosedürleri, karakterizasyon teknikleri

Abstract

Lignoselülozik materyallerden çeşitli proseslerle yenilenebilir malzemeler üretmek, bilim insanları için önemli bir araştırma alanı haline gelmiş ve bu süreç, selüloz nanokristal (SNK) ve selüloz nanofibril (SNF) gibi yeni malzemelerin ortaya çıkmasını sağlamıştır. Bahsi geçen biyo-bazlı malzemelerin geliştirilmesi, temel bilgi birikiminin artmasına ve yenilikçi proseslerin oluşturulmasına katkıda bulunurken, selülozik nano malzemelerin çeşitli mühendislik disiplinlerinde yaygın kullanımına da zemin hazırlamıştır. Biyobozunur ve biyouyumlu olmalarının yanı sıra, tarımsal ve endüstriyel atıklardan dahi üretilebilmeleri, selülozik nanomalzemeleri çevresel açıdan sürdürülebilir hale getirmekte ve bu nedenle araştırmacıların konuya ilişkin ilgisi giderek artırmaktadır. Bu derleme makalesi, selüloz nanokristaller (SNK) başta olmak üzere selülozik nanomalzemelerin (SNF) üretim süreçleri, elde edildikleri kaynaklar, karakterizasyon yöntemleri ilişkin güncel gelişmeleri ayrıntılı bir şekilde incelemeyi amaçlamaktadır.

Keywords

• Selüloz nanokristaller (SNK)
• Selüloz nanofibriller (SNF)
• Lignoselülozik malzemeler
• Sürdürülebilir nanomalzemeler
• Karakterizasyon teknikleri

Cellulose nanocrystals: Synthesis procedures and characterization techniques

Abstract

The production of renewable materials from lignocellulosic materials through various processes has become a significant research area for scientists, leading to the emergence of novel materials such as cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs). The development of these bio-based materials not only contributes to the expansion of fundamental knowledge and the creation of innovative processes but also facilitates the widespread application of cellulosic nanomaterials across various engineering disciplines. In addition to being biodegradable and biocompatible, their production from agricultural and industrial waste makes cellulosic nanomaterials environmentally sustainable, thereby increasing researchers' interest in the field. This review article aims to provide a comprehensive analysis of the latest developments in the production processes, raw material sources, and characterization methods of cellulosic nanomaterials, with a particular focus on cellulose nanocrystals (CNCs).

Keywords

• Cellulose nanocrystals (CNCs)
• Cellulose nanofibrils (CNFs)
• Lignocellulosic materials
• Sustainable nanomaterials
• Characterization techniques

References

1. [1] Calisto Friant M, Vermeulen WJV, Salomone R. “Analysing European Union circular economy policies: Words versus actions”. Sustainable Production and Consumption, 27, 337-353, 2021.
2. [2] Ramchuran SO, O’Brien F, Dube N, Ramdas V. “An overview of green processes and technologies, biobased chemicals and products for industrial applications”. Current Opinion in Green and Sustainable Chemistry, 41, 100832, 2023.
3. [3] Nagarajan KJ, Karthikeyan SM, Ramachandran MM, Rajan KS. “A comprehensive review on cellulose nanocrystals and cellulose nanofibers: Pretreatment, preparation, and characterization”. Polymer Composites, 42(4), 1588-1630, 2021.
4. [4] Klemm D, Heublein A, Fink H, Bohn A. “Nanocelluloses: A new family of nature-based materials”. Angewandte Chemie International Edition, 50(24), 5438-5466, 2011.
5. [5] Rajinipriya M, Nagalakshmaiah M, Robert M, Elkoun S. “Importance of agricultural and industrial waste in the field of nanocellulose and recent industrial developments of wood-based nanocellulose: A review”. ACS Sustainable Chemistry & Engineering, 6(3), 2807-2828, 2018.
6. [6] Qureshi SS, Nizamuddin S, Xu J, Mazari, SA, Hossain, M S, Jatoi AS, Mubarak NM, Griffin GJ, Siddiqui HA, Siddiqui MT H, Riaz S, Naseem S, Chen WH. “Cellulose nanocrystals from agriculture and forestry biomass: Synthesis methods, characterization and industrial applications”. Environmental Science and Pollution Research, 31, 58745-58778, 2024.
7. [7] Magalhães S, Rodrigues F, Gomes L, Ferreira P. “Eco-friendly methods for extraction and modification of cellulose: An overview”. Polymers, 15(14), 3138, 2023.
8. [8] Heise K, Maleki RK, Ghadiri S, Chen Y. “Nanocellulose: Recent fundamental advances and emerging biological and biomimicking applications”. Advanced Materials, 33(3), 1-30, 2021.

9. [9] Choudhury RR, Sahoo SK, Gohil JM. “Potential of bioinspired cellulose nanomaterials and nanocomposite membranes thereof for water treatment and fuel cell applications”. Cellulose, 27(12), 6719-6746, 2020.
10. [10] Bilek S, Yalçın Melikoğlu A, Cesur S. “Tarımsal atıklardan selüloz nanokristallerinin eldesi, karakteristik özellikleri ve uygulama alanları”. Akademik Gıda, 17(1), 140-148, 2019.
11. [11] Fotie G, Limbo S, Piergiovanni L. “Manufacturing of food packaging based on nanocellulose: Current advances and challenges”. Nanomaterials, 10(9), 1726, 2020.
12. [12] Ji C, Wang Y. “Nanocellulose-stabilized pickering emulsions: Fabrication, stabilization, and food applications”. Advances in Colloid and Interface Science, 318(2), 102970, 2023.
13. [13] Li J, Li RK, Wang Y. “Emerging food packaging applications of cellulose nanocomposites: A review”. Polymers (Basel), 14(19), 4025, 2022.
14. [14] Raj V, Raorane CJ, Lee JH, Lee J. “Appraisal of chitosan-gum arabic-coated bipolymeric nanocarriers for efficient dye removal and eradication of the plant pathogen Botrytis cinerea”. ACS Applied Materials & Interfaces, 13(40), 47354-47370, 2021.
15. [15] Liu K, Chen Z, Zhang M. “Recent advances in cellulose and its derivatives for oilfield applications”. Carbohydrate Polymers, 259, 117740, 2021.
16. [16] Franco TS, Rocha GP, Silva MM. “Nanocellulose and its application in the food industry”. International Conference on Environmental, Biological and Pharmaceutical Sciences, Basel, Switzerland, 16–18 November 2023.
17. [17] Xu W, Zhang R, Wu X. “On low-concentration inks formulated by nanocellulose assisted with gelatin methacrylate (GelMA) for 3D printing toward wound healing application”. ACS Applied Materials & Interfaces, 11(9), 8838-8848, 2019.
18. [18] González-Domínguez JM, López-Villanueva F, Martínez-Guerra J. “Waterborne graphene- and nanocellulose-based inks for functional conductive films and 3D structures”. Nanomaterials, 11(6), 1435, 2021.
19. [19] Ong XR, Chen AX, Li N, Yang YY, Luo HK. “Nanocellulose: Recent advances toward biomedical applications”. Small Science, 3(2),1435, 2023.
20. [20] Garcia KR, Beck RCR, Brandalise RN, dos Santos V, Koester LS. “Nanocellulose, the green biopolymer trending in pharmaceuticals: A patent review”. Pharmaceutics, 16(1), 145, 2024.
21. [21] Varghese R, Cherian R, Chirayil C, Antony T, Kargarzadeh H, Thomas S. “Nanocellulose as an avenue for drug delivery applications: A mini-review”. Journal of Composites Science, 7(6), 210, 2023.
22. [22] Kulkarni SA, Feng SS. “Effects of particle size and surface modification on cellular uptake and biodistribution of polymeric nanoparticles for drug delivery”. Pharmaceutical Research, 30(10), 2512-2522, 2013.
23. [23] Kaur P, Bansal R, Ghosh S. “Nanocellulose: Resources, physio-chemical properties, current uses and future applications”. Frontiers in Nanotechnology, 3, 1-17, 2021.
24. [24] Poulose A, Kumar P, Rajendran M. “Nanocellulose: A fundamental material for science and technology applications”. Molecules, 27(22), 8032, 2022.
25. [25] Jonoobi M, Harun M, Shakeri R, Othman AI. “Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: A review”. Cellulose, 22(2), 935-969, 2015.
26. [26] Klemm D, Heublein B, Fink H, Bohn A. “Cellulose: Fascinating biopolymer and sustainable raw material”. Angewandte Chemie International Edition, 44(22), 3358-3393, 2005.
27. [27] Calvo V, Martínez-Barón C, Fuentes L, Maser WK, Benito AM, González-Domínguez JM. “Nanocellulose: The ultimate green aqueous dispersant for nanomaterials”. Polymers (Basel), 16(12), 1664, 2024.
28. [28] Eyley S, Thielemans W. “Surface modification of cellulose nanocrystals”. Nanoscale, 6(14), 7764-7779, 2014.
29. [29] Panahi-Sarmad M, Alikarami N, Guo T, Haji M, Jiang F, Rojas OJ. “Aerogels based on bacterial nanocellulose and their applications”. Small, 20(44), 1-31, 2024.
30. [30] Liu D, Meng Q, Hu J. “Bacterial nanocellulose hydrogel: A promising alternative material for the fabrication of engineered vascular grafts”. Polymers (Basel), 15(18), 3812, 2023.
31. [31] Verma C, Chhajed M, Gupta P, Roy S, Maji PK. “Isolation of cellulose nanocrystals from different waste biomass collating their liquid crystal ordering with morphological exploration”. International Journal of Biological Macromolecules, 175, 242-253, 2021.
32. [32] Johar N, Ahmad I, Dufresne A. “Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk”. Industrial Crops and Products, 37(1), 93-99, 2012.
33. [33] Lu S, Liu L, Huang C, Zhang Y, Liu X. “Facile extraction and characterization of cellulose nanocrystals from agricultural waste sugarcane straw”. Journal of the Science of Food and Agriculture, 102(1), 312-321, 2022.
34. [34] Picot-Allain MCN, Emmambux MN. “Isolation, characterization, and application of nanocellulose from agro-industrial by-products: A review”. Food Reviews International, 39(2), 941-969, 2023.
35. [35] Huang S, Zhou L, Li MC, Wu Q, Zhou D. “Cellulose nanocrystals (CNCs) from corn stalk: Activation energy analysis”. Materials, 10(1), 80, 2017.
36. [36] Plianwong S, Sirirak T. “Cellulose nanocrystals from marine algae Cladophora glomerata by using microwave-assisted extraction”. International Journal of Biological Macromolecules, 260, 129422, 2024.
37. [37] Machado B, Costa SM, Costa I, Fangueiro R, Ferreira DP. “The potential of algae as a source of cellulose and its derivatives for biomedical applications”. Cellulose, 31(6), 3353-3376, 2024.
38. [38] Samarawickrama R, Wijayapala UGS, Wanasekara ND, Fernando CAN. “Improving dyeing properties of cotton fabrics to natural dyes with cellulose nanocrystals (CNCs)”. Journal of Nanotechnology, 5(1), 1-8, 2021.
39. [39] Kalhori F, Nikkhah M, Ahmadzadeh H, Aghdasi AH, Roozbehani MTR, Omidi M. “Enzyme activity inhibition properties of new cellulose nanocrystals from Citrus medica L pericarp: A perspective of cholesterol lowering”. Luminescence, 37(11), 1836-1845, 2022.
40. [40] Reshmy R, Philip E, Thomas D, Madhavan A, Sindhu R, Binod P, Varjani S, Awasthi MK, Pandey A. “Bacterial nanocellulose: Engineering, production, and applications”. Bioengineered, 12(2), 11463–11483, 2021.
41. [41] Halib N, Ahmad I, Grassi M, Grassi G. “The remarkable three-dimensional network structure of bacterial cellulose for tissue engineering applications”. International Journal of Pharmaceutics, 566, 631-640, 2019.
42. [42] Khosravi-Darani K, Koller M, Akramzadeh N, Mortazavian AM. Bacterial nanocellulose: “Biosynthesis and medical application”. Biointerface Research in Applied Chemistry, 10(5), 3005–3016, 2020.
43. [43] Azeredo HMC, Barud H, Farinas CS, Vasconcellos VM, Claro AM. “Bacterial cellulose as a raw material for food and food packaging applications”. Frontiers in Sustainable Food Systems, 3(7),1-14, 2019.
44. [44] Trache D, Hussin MH, Chuin CTH, Sabar SS, Fazita MRR, Ibrahim OH, Haafiz N, Hiziroglu AKM. “Nanocellulose: From fundamentals to advanced applications”. Frontiers in Chemistry, 8(392), 1-33, 2020.
45. [45] Paunescu C, Pitigoi G, Cosma G, Pituru SM, Grigore V, Petrescu S, Mircica ML, Radulescu M, Cosma A, Rezaee R. “Increasing endurance in physical effort by administration of inosine”. Farmacia, 69(1), 148-154, 2021.
46. [46] Yu S, Sun J, Shi Y, Wang Q, Wu J, Liu J. “Nanocellulose from various biomass wastes: Its preparation and potential usages towards high value-added products”. Environmental Science and Ecotechnology, 5, 100077, 2021.
47. [47] Kontturi E, Laaksonen J, Linder MJ, Ikkala M, Nonappa, Gröschel A, Toivonen TT. “Advanced materials through assembly of nanocelluloses”. Advanced Materials, 30(24), 1703779, 2018.
48. [48] Tanpichai S. “Recent development of plant-derived nanocellulose in polymer nanocomposite foams and multifunctional applications: A mini-review”. Express Polymer Letters, 16(1), 52-74, 2022.
49. [49] Yapar Ö, Piltonen P, Hadela A, Lobnik A. “Sustainable all-cellulose biocomposites from renewable biomass resources fabricated in a water-based processing system by the vacuum-filtration-assisted impregnation method”. Polymers, 16(13), 1921, 2024.
50. [50] Abo BO, Gao M, Wang Y, Wu C, Ma H, Wang Q. “Lignocellulosic biomass for bioethanol: An overview on pretreatment, hydrolysis and fermentation processes”. Reviews on Environmental Health, 34(1), 57-68, 2019.
51. [51] Adiguzel AO. “Pre-treatment and hydrolysis methods for bioethanol production from lignocellulosic material”. SAÜ Fen Bilimleri Enstitüsü Dergisi, 17(3), 381-397, 2013.
52. [52] Zimmermann T, Bordeanu N, Strub E. “Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential”. Carbohydrate Polymers, 79(4), 1086-1093, 2010.
53. [53] Agu OS, Tabil LG, Meda V, Dumonceaux T, Mupondwa E. Pretreatment of crop residues by application of microwave heating and alkaline solution for biofuel processing: A review. Editors: Jacob-Lopes E, Zepka LQ, Deprá MC. Renewable Resources and Biorefineries, 47–67, London, UK, IntechOpen, 2019.
54. [54] Kucharska K, Rybarczyk P, Hołowacz I, Łukajtis R, Glinka M, Kamiński M. “Pretreatment of lignocellulosic materials as substrates for fermentation processes”. Molecules, 23(11), 2937, 2018.
55. [55] Kumar AK, Sharma S. “Recent updates on different methods of pretreatment of lignocellulosic feedstocks: A review”. Bioresources and Bioprocessing, 4(1), 7, 2017.
56. [56] Ferreira DP, Cruz J, Fangueiro R. Surface modification of natural fibers in polymer composites. Editors: Puglia D, Fortunati E, Kenny JM. Green Composites for Automotive Applications, 3–41, Elsevier, Amsterdam, The Netherlands, 2019.
57. [57] Geng W, Cao J, Fan Y, Chen J. “The influence of lignin content and structure on hemicellulose alkaline extraction for non-wood and hardwood lignocellulosic biomass”. Cellulose, 26(5), 3219-3230, 2019.
58. [58] Wang Q, Xiao S, Shi SQ. “The effect of hemicellulose content on mechanical strength, thermal stability, and water resistance of cellulose-rich fiber material from poplar”. Bioresources, 14(3), 5288-5300, 2019.
59. [59] Vijay R, Pavithran N, Velmurugan R. “Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens”. International Journal of Biological Macromolecules, 125, 99-108, 2019.
60. [60] Cai M, Takagi H, Nakagaito AN, Li Y, Waterhouse GIN. “Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites”. Composites Part A: Applied Science and Manufacturing, 90, 589-597, 2016.
61. [61] Prithiviraj M, Muralikannan R. “Investigation of optimal alkali-treated Perotis indica plant fibers on physical, chemical, and morphological properties”. Journal of Natural Fibers, 19(7), 2730-2743, 2022.
62. [62] Kaur K, Phutela UG. “Morphological and structural changes in paddy straw influenced by alkali and microbial pretreatment”. Detritus, In Press (1), 1, 2018.
63. [63] Oriez V, Peydecastaing J, Pontalier PY. “Lignocellulosic biomass mild alkaline fractionation and resulting extract purification processes: Conditions, yields, and purities”. Clean Technologies, 2(1), 91-115, 2020.
64. [64] Baruah J, Nath T, Sharma R, Kumar S, Deka D, Barua DC. “Recent trends in the pretreatment of lignocellulosic biomass for value-added products”. Front Energy Resarch, 6(141), 1-19, 2018.
65. [65] Hassan MM, Rahman MM, Ghos BC, Hossain MI, Al Amin M, Al Zuhanee MK. “Extraction and characterization of CNC from waste sugarcane leaf sheath as a reinforcement of multifunctional bio-nanocomposite material: A waste to wealth approach”. Carbon Trends, 17, 100400, 2024.
66. [66] Fathana H, Rahmi R, Lubis S, Adlim M, Muktaridha O, Iqhramullah M. “The effects of HCl concentration and ultrasound-assisted on the fabrication of cellulose nanocrystal derived from sugarcane bagasse”. Research Square, preprint, 2022.
67. [67] Rahman MM, Pk MEH, Waliullah M, Hossain MI, Maniruzzaman M, Ghos BC. “Production of cellulose nanocrystals from the waste banana (M. oranta) tree rachis fiber as a reinforcement to fabricate useful bionanocomposite”. Carbohydrate Polymer Technologies and Applications, 13(8), 200-207, 2024.
68. [68] Costa LAS, de J Assis D, Gomes GVP, da Silva JBA, Fonsêca AF, Druzian JI. “Extraction and characterization of nanocellulose from corn stover”. Materials Today Proceedings, 2(1), 287-294, 2015.
69. [69] Dinçel Kasapoğlu E, Kahraman S, Tornuk F. “Extraction optimization and characterization of cellulose nanocrystals from apricot pomace”. Foods, 12(4), 746, 2023.
70. [70] Hancock J, Osei-Bonsu RM, Hoque L, Samuels E, Foster EJ. “Valorization of cannabis green waste to cellulose nanomaterials via phosphoric acid hydrolysis”. Industrial Crops and Products, 201, 116888, 2023.
71. [71] Tanis MH, Wallberg O, Galbe M, Al-Rudainy B. “Lignin extraction by using two-step fractionation: A review”. Molecules, 29(1), 98, 2023.
72. [72] D’Orsi R, Di Fidio N, Antonetti C, Raspolli AMG, Galletti A, Operamolla A. “Isolation of pure lignin and highly digestible cellulose from defatted and steam-exploded Cynara cardunculus”. ACS Sustainable Chemistry & Engineering, 11(5), 1875-1887, 2023.
73. [73] Guimarães M, Botaro VR, Novack KM, Flauzino Neto WP, Mendes LM, Tonoli GHD. “Preparation of cellulose nanofibrils from bamboo pulp by mechanical defibrillation for their applications in biodegradable composites”. Journal of Nanoscience and Nanotechnology, 15(9), 6751-6768, 2015.
74. [74] Neenu KV, George KC, Joseph MK, Ramesh MC. “Effect of oxalic acid and sulphuric acid hydrolysis on the preparation and properties of pineapple pomace derived cellulose nanofibers and nanopapers”. International Journal of Biological Macromolecules, 209, 1745-1759, 2022.
75. [75] Hubbell CA, Ragauskas AJ. “Effect of acid-chlorite delignification on cellulose degree of polymerization”. Bioresource Technology, 101(19), 7410-7415, 2010.
76. [76] Brugliera GJ, Mai HT, Muthurajan R, Lee DJ, Moulton BA. “Comparative analysis of sulfuric acid and hydrochloric acid hydrolysis of wood pulp cellulose for the preparation of cellulose nanocrystals”. Cellulose, 28(11), 7143-7155, 2021.
77. [77] He L, Liu Y, Mustapha S, Li X, Huang CL. “Influence of acid hydrolysis conditions on the properties of cellulose nanocrystals extracted from switchgrass”. Carbohydrate Polymers, 253, 117218, 2021.
78. [78] Silva AP, Veloso MM, Lima LL, de Lima MG, de Oliveira FS, Carvalho LH. “Production and characterization of cellulose nanocrystals obtained from banana peel by acid hydrolysis”. Journal of Polymers and the Environment, 30, 2616-2625, 2022.
79. [79] Jonoobi A, Mathew K, Niska M, Ehsanpour A, Agarwal UP, Heidari AA, Bousfield AK, Sain I. “A review of cellulose nanocrystals (CNCs) production methods and their surface modification for multifunctional applications”. Cellulose, 28(9), 5043-5071, 2021.
80. [80] Zhai Y, Zeng W, Wang Y, Mao Y, Wu J. “Cellulose nanocrystals as reinforcement in bioplastics: A review”. Composites Communications, 30, 100964, 2022.
81. [81] Yazdanpanah ME, Yousefi M, Resalati R. “Surface modified CNCs as nanoreinforcement: A comprehensive review”. Polymer Advanced Technology, 34(1), 4-25, 2023.
82. [82] Tonoli GHD, Bras FA, Ramires C, Otoni LS. “Biodegradable composites reinforced with nanocellulose: A review”. Nanomaterials, 13(6), 944, 2023.
83. [83] George J, Sabapathi SN. “Cellulose nanocrystals: Synthesis, functional properties, and applications”. Nanotechnology, Science and Applications, 8, 45-54, 2015.
84. [84] Ahmad AL, Mohamed SNZ. “A comprehensive review on nanocellulose production using acidic ionic liquids and potential applications”. Polymers, 15(3), 675, 2023.
85. [85] Trache D, Hussin MH, Dufresne MKAH, Halim SK, Tahir SM. “Nanocellulose: From fundamentals to advanced applications”. Frontiers in Chemistry, 6, 392, 2020.
86. [86] Muñoz-Bonilla A, Fernández-García M. “Polymeric materials with antimicrobial activity”. Progress in Polymer Science, 37(2), 281-339, 2012.
87. [87] Roy L, Jha S, Choudhury S, Yadav M, Yadav AK, Nandi S. “Antibacterial and insect-repellent properties of natural bio-based nanocomposite for packaging and medical applications”. Journal of Environmental Chemical Engineering, 10(6), 108317, 2022.
88. [88] Lai CY, Wu CY, Chuang YC, Chen YL, Lin CT. “Preparation of antimicrobial electrospun polyvinyl alcohol nanofibers from plant essential oils”. Polymers, 15(1), 207, 2023.
89. [89] Fijoł N, Lewandowska W. “Essential oils loaded electrospun nanofibers for biomedical and cosmetic applications: A review”. Materials, 15(3), 899, 2022.
90. [90] Benli HBMİB, Bahtiyari Mİ. “Pamuklu Kumaşların Ozon-Hidrojen Peroksit Kombinasyonu ile Ağartılması ve Doğal Boyalar ile Renklendirilmesi”. Tekstil ve Mühendis, 23(103),189-196, 2016.
91. [91] Walawska A, Olak-Kucharczyk M, Kaczmarek A, Kudzin MH. “Environmentally friendly bleaching process of the cellulose fibres materials using ozone and hydrogen peroxide in the gas phase”. Materials, 15(3),1355, 2024.
92. [92] Nagarajan KJ, Balaji AN, Ramanujam NR. “Extraction of cellulose nanofibers from Cocos nucifera var. aurantiaca peduncle by ball milling combined with chemical treatment”. Carbohydrate Polymers, 21(2), 312–322, 2019.
93. [93] Camarero Espinosa S, Kuhnt T, Foster EJ, Weder C. “Isolation of thermally stable cellulose nanocrystals by phosphoric acid hydrolysis”. Biomacromolecules, 14(4),1223–1230,2013.
94. [94] Sin Ng HM, Tee LT, Bee TT, Hui ST, Low D, Rahmat CY. “Extraction of cellulose nanocrystals from plant sources for application as reinforcing agent in polymers”. Composites Part B: Engineering, 75,176–200, 2015.
95. [95] Jutakridsada P, Theerakulpisut S, Srivastava V, Sillanpää M and Kamwilaisak K, “Preparation and mechanism analysis of morphology-controlled cellulose nanocrystals by H2SO4 hydrolysis of Eucalyptus pulp”. Engineering and Applied Science Research, 49(6), 753–762,2022.
96. [96] Soleimani S, Heydari A, Fattahi M. “Isolation and characterization of cellulose nanocrystals from waste cotton fibers using sulfuric acid hydrolysis”. Starch- Stärke, 74(12), 2200159, 2022.
97. [97] Wang H, Xu Z, Wang X, Liu Y, Zhan X, Liu Y. “Sustainable preparation of bifunctional cellulose nanocrystals via mixed H2SO4/formic acid hydrolysis”. Carbohydrate Polymers, 266, 118107, 2021.
98. [98] Rubleva NV, Voronova MI, Surov OV, Zakharov AG, Lebedeva EO, Fineevskii AV. “Production of cellulose nanocrystals by hydrolysis in mixture of hydrochloric and nitric acids”. Izvestiya Vysshikh Uchebnykh Zavedenii Khimiya Khimicheskaya Tekhnologiya, 62(7),83–89, 2019.
99. [99] Surov OV, Afineevskii AV, Voronova MI. “Sulfuric acid alcoholysis as a way to obtain cellulose nanocrystals”. Cellulose, 30(6), 3469–3484, 2023.
100. [100] Zulnazri Z, Asrofi M, Abral H, Kasim A, Pratoto A, Sapuan SM. “Effect of hydrochloric acid hydrolysis under sonication and hydrothermal process to produce cellulose nanocrystals from oil palm empty fruit bunch (OPEFB)”. Polymers (Basel), 16(4), 561, 2024.
101. [101] Vaezi K, Asadpour G. “Effects of HCl hydrolyzed cellulose nanocrystals from waste papers on the hydroxypropyl methylcellulose/cationic starch biofilms”. Waste and Biomass Valorization, 13(4), 2211–2223, 2022.
102. [102] Raza M, Abu-Jdayil B. “Extraction of cellulose nanocrystals from date seeds using transition metal complex-assisted hydrochloric acid hydrolysis”. International Journal of Biological Macromolecules, 294, 126893, 2025.
103. [103] Al G, Aydemir D. “Nanoselüloz: yapısı, çeşitleri ve kullanım alanları”. Bartın Orman Fakültesi Dergisi, 26(2), 233–2482024.
104. [104] Zhang Y, Zhao Y, Li S, Wang R, Ma X. “Preparation methods of cellulose nanocrystal and its application in treatment of environmental pollution: A mini-review”. Colloid and Interface Science Communications, 53, 100710, 2023.
105. [105] Chen L, Zhu JY, Baez C, Kitin P, Elder T. “Highly thermal-stable and functional cellulose nanocrystals and nanofibrils produced using fully recyclable organic acids”. Green Chemistry, 18(13), 3835–3843, 2016.
106. [106] Nasir M, Hashim R, Sulaiman O, Asim M. In Cellulose-Reinforced Nanofibre Composites. Editors: Jawaid M, Boufi S, Abdul Khalil HP. S. Nanocellulose ,261-276, Oxford, UK , Elsevir, 2017.
107. [107] Hu J, Tian D, Renneckar S, Saddler JN. “Enzyme mediated nanofibrillation of cellulose by the synergistic actions of an endoglucanase, lytic polysaccharide monooxygenase (LPMO) and xylanase”. Scientific Reports, 8(1), 3195, 2018.
108. [108] Islam MT, Alam MM, Patrucco A, Montarsolo A, Zoccola M. “Preparation of nanocellulose: A review”. AATCC Journal of Research, 1(5), 17-23, 2014.
109. [109] Ribeiro RSA, Pohlmann BC, Calado V, Bojorge N, Pereira N. “Production of nanocellulose by enzymatic hydrolysis: Trends and challenges”. Engineering in Life Sciences, 19(4), 279-291, 2019.
110. [110] Dias IKR, Siqueira GA, Arantes V. “Xylanase increases the selectivity of the enzymatic hydrolysis with endoglucanase to produce cellulose nanocrystals with improved properties”. International Journal of Biological Macromolecules, 220, 1124-1133, 2022.
111. [111] Zhang Q, Lin F, Wang X, Zhang Y. “High yielding, one-step mechano-enzymatic hydrolysis of cellulose to cellulose nanocrystals without bulk solvent”. Bioresource Technology, 331, 125040, 2021.
112. [112] Ren RW, Chen XQ, Shen WH. “Preparation and separation of pure spherical cellulose nanocrystals from microcrystalline cellulose by complex enzymatic hydrolysis”. International Journal of Biological Macromolecules, 202, 526-534, 2022.
113. [113] Meyabadi TF, Dadashian F. “Optimization of enzymatic hydrolysis of waste cotton fibers for nanoparticles production using response surface methodology”. Fibers and Polymers, 13(3), 313-321, 2012.
114. [114] Wulandari WT, Rochliadi A, Arcana IM. “Nanocellulose prepared by acid hydrolysis of isolated cellulose from sugarcane bagasse”. IOP Conference Series: Materials Science and Engineering, 107, 012045, 2016.
115. [115] Batool F, Iqbal N, Adeel S, Azeem M, Hussaan M, Mia R. “Sugar beet (Beta vulgaris L.) leaves as natural colorant for cotton dyeing using an ecofriendly approach toward industrial progress”. Science Progress, 107(3), 1-22, 2024.
116. [116] Du L, Wang J, Zhang Y, Qi C, Wolcott M, Yu Z. “Preparation and characterization of cellulose nanocrystals from the bio-ethanol residuals”. Nanomaterials, 7(3), 51, 2017.
117. [117] Banerjee M, Saraswatula S, Williams A, Brettmann B. “Effect of purification methods on commercially available cellulose nanocrystal properties and TEMPO oxidation”. Processes, 8(6), 699, 2020.
118. [118] Jo HM, Lee SH, Lee JY. “Preparation and characterization of cellulose nanocrystals from paper mulberry fibers”. Bioresources, 18(2), 3481–3496, 2023.
119. [119] Wang W, Mozuch MD, Sabo RC, Kersten P, Zhu JY, Jin Y. “Production of cellulose nanofibrils from bleached eucalyptus fibers by hyperthermostable endoglucanase treatment and subsequent microfluidization”. Cellulose, 22(1), 351–361, 2015.
120. [120] De Souza Lima MM, Borsali R. “Rodlike cellulose microcrystals: Structure, properties, and applications”. Macromolecular Rapid Communications, 25(7),771–787, 2004.
121. [121] Rodsamran P, Sothornvit R. “Renewable cellulose source: Isolation and characterisation of cellulose from rice stubble residues”. International Journal of Food Science and Technology, 50(9), 2013–2021, 2015.
122. [122] Vanzetto AB, Beltrami LVR, Zattera AJ. “Textile waste as precursors in nanocrystalline cellulose synthesis”. Cellulose, 28(11), 6967-6981, 2021.
123. [123] Melikoğlu AY, Bilek SE, Cesur S. “Optimum alkaline treatment parameters for the extraction of cellulose and production of cellulose nanocrystals from apple pomace”. Carbohydrate Polymers, 215, 330-337, 2019.
124. [124] Dassanayake RS, Acharya S, Abidi N. “Characterization of cellulose nanocrystals by current spectroscopic techniques”. Applied Spectroscopy Reviews, 58(3), 180-205, 2023.
125. [125] Sparrman T, Svenningsson L, Sahlin-Sjövold K, Nordstierna L, Westman G, Bernin D. “A revised solid-state NMR method to assess the crystallinity of cellulose”. Cellulose, 26(17), 8993-9003, 2019.
126. [126] Shang Q, Liu C, Hu Y, Jia P, Hu L, Zhou Y. “Bio-inspired hydrophobic modification of cellulose nanocrystals with castor oil”. Carbohydrate Polymers, 191, 168-175, 2018.
127. [127] Nessi V, Bayer IS, Bartoli M, Athanassiou A. “Cellulose nanocrystals-starch nanocomposites produced by extrusion: Structure and behavior in physiological conditions”. Carbohydrate Polymers, 225, 115123, 2019.
128. [128] Greczynski G, Hultman L. “X-ray photoelectron spectroscopy: Towards reliable binding energy referencing”. Progress in Materials Science, 107, 100591, 2020.
129. [129] Zhang K, Shen M, Liu H, Shang S, Wang D, Liimatainen H. “Facile synthesis of palladium and gold nanoparticles by using dialdehyde nanocellulose as template and reducing agent”. Carbohydrate Polymers, 186, 132-139, 2018.
130. [130] Baker MJ, Hussain SR, Lovergne L, Untereiner V, Hughes C, Lukaszewski RA, Thiéfin G, Sockalingum GD. “Developing and understanding biofluid vibrational spectroscopy: A critical review”. Chemical Society Reviews, 45(7), 1803-1818, 2016.
131. [131] Maréchal Y, Chanzy H. “The hydrogen bond network in Iβ cellulose as observed by infrared spectrometry”. Journal of Molecular Structure, 523(1-3), 183-196, 2000.
132. [132] Dassanayake RS, Acharya S, Abidi N. Biopolymer-based materials from polysaccharides: Properties, processing, characterization and sorption applications. Editor: Edebali S. In Advanced Sorption Process Applications. IntechOpen, 1-24, IntechOpen, London, UK, 2018.
133. [133] Wei J, Cai J, Zhang Y, Zhong Y, Zhou J, Zhu P. “Nanocellulose-based magnetic hybrid aerogel for adsorption of heavy metal ions from water”. Journal of Materials Science, 54(8), 6709-6718, 2019.
134. [134] Xiao YT, Chin WL, Abd Hamid SB. “Facile preparation of highly crystalline nanocellulose by using ionic liquid”. Advanced Materials Research, 1087, 106-110, 2015.
135. [135] Geminiani L, Martinelli M, Palagini F, D’Acunto M, Narducci D. “Differentiating between natural and modified cellulosic fibres using ATR-FTIR spectroscopy”. Heritage, 5(4), 4114-4139, 2022.
136. [136] Agarwal UP, Ralph SA, Reiner RS, Baez C. “Probing crystallinity of never-dried wood cellulose with Raman spectroscopy”. Cellulose, 23(1), 125-144, 2016.
137. [137] Agarwal UP. Raman Spectroscopy in the Analysis of Cellulose Nanomaterials. Editors: Lead JR, Smith E. Characterization of Nanomaterials in Complex Environmental and Biological Media, 75–90, Elsevier, Amsterdam, The Netherlands, 2017.
138. [138] Liu Y, Wang H, Yu G, Yu Q, Li B, Mu X. “A novel approach for the preparation of nanocrystalline cellulose by using phosphotungstic acid”. Carbohydrate Polymers, 110, 415-422, 2014.
139. [139] Park S, Baker JO, Himmel ME, Parilla PA, Johnson DK. “Cellulose crystallinity index: Measurement techniques and their impact on interpreting cellulase performance”. Biotechnology for Biofuels, 3(1), 10, 2010.
140. [140] French A. “How crystalline is my cellulose specimen? Probing the limits of X-ray diffraction”. Bioresources, 17(4), 5557-5561, 2022.
141. [141] Salem KS, Zoppe JO, Korhonen JT, Bras J, Wang X, Fraschini C, Kim Y, Isogai A, Dufresne A. “Comparison and assessment of methods for cellulose crystallinity determination”. Chemical Society Reviews, 52(18), 6417-6446, 2023.
142. [142] Montoya-Escobar N, Restrepo-Osorio A, Buitrago-Sierra R, Arboleda JC. “Use of Fourier series in X-ray diffraction (XRD) analysis and Fourier-transform infrared spectroscopy (FTIR) for estimation of crystallinity in cellulose from different sources”. Polymers (Basel), 14(23), 5199, 2022.
143. [143] Wu G. “Characterization of the redispersibility of cellulose nanocrystals by particle size analysis using dynamic light scattering”. TAPPI Journal, 18(4), 223–231, 2019.
144. [144] Rodriguez-Loya J, Lerma M, Gardea-Torresdey JL. “Dynamic light scattering and its application to control nanoparticle aggregation in colloidal systems: A review”. Micromachines (Basel), 15(1), 24, 2023.
145. [145] Gallardo-Sánchez MA, Cuéllar-Cruz M, González-Laredo RF. “Optimization of the obtaining of cellulose nanocrystals from Agave tequilana Weber var. Azul bagasse by acid hydrolysis”. Nanomaterials, 11(2), 520, 2021.
146. [146] Bolat F, Ghitman J, Necolau MI, Vasile E, Iovu H. “A comparative study of the impact of the bleaching method on the production and characterization of cotton-origin nanocrystalline cellulose by acid and enzymatic hydrolysis”. Polymers (Basel), 15(16), 3446, 2023.
147. [147] Marway H. Investigation of Nanocellulose Mechanical Properties and İnteractions in Salt and Surfactant Solutions Measured By Atomic Force Microscopy. PhD Dissertation, McMaster University, Hamilton, Canada, 2017.
148. [148] Kian LK, Jawaid M, Ariffin H, Karim Z. “Isolation and characterization of nanocrystalline cellulose from roselle-derived microcrystalline cellulose”. International Journal of Biological Macromolecules, 114, 54-63, 2018.
149. [149] Shazali N, Shah MZ, Ariffin H, Yusof YA. “Characterization and cellular internalization of spherical cellulose nanocrystals (CNC) into normal and cancerous fibroblasts”. Materials, 12(19), 3251, 2019.
150. [150] Mattos BD, Tardy BL, Rojas OJ. “Accounting for substrate interactions in the measurement of the dimensions of cellulose nanofibrils”. Biomacromolecules, 20(7), 2657-2665, 2019.
151. [151] Foster EJ, Moon RJ, Agarwal UP. “Current characterization methods for cellulose nanomaterials”. Chemical Society Reviews, 47(8), 2609-2679, 2018.
152. [152] Stinson-Bagby KL, Roberts R, Foster EJ. “Effective cellulose nanocrystal imaging using transmission electron microscopy”. Carbohydrate Polymers, 186, 429-438, 2018.
153. [153] Ang S, Narayanan JR, Kargupta W, Haritos V, Batchelor W. “Cellulose nanofiber diameter distributions from microscopy image analysis: Effect of measurement statistics and operator”. Cellulose, 27(8), 4189-4208, 2020.
154. [154] Nagarajan KJ, Balaji AN, Thanga Kasi Rajan S, Sathick Basha K. “Effect of sulfuric acid reaction time on the properties and behavior of cellulose nanocrystals from Cocos nucifera var. aurantiaca peduncle cellulose microfibers”. Materials Research Express, 6(12), 125333, 2019.
155. [155] Lichtenstein K, Lavoine N. “Toward a deeper understanding of the thermal degradation mechanism of nanocellulose”. Polymer Degradation and Stability, 146, 53-60, 2017.
156. [156] Gan PG, Sam ST, Abdullah MFB, Omar MF. “Thermal properties of nanocellulose-reinforced composites: A review”. Journal of Applied Polymer Science, 137(11),1-14, 2020.
157. [157] Zhang Y, Wang X, Li Y, Li J. “Cellulose nanocrystals composites with excellent thermal stability and high tensile strength for preparing flexible resistance strain sensors”. Carbohydrate Polymer Technologies and Applications, 3, 100214, 2022.
158. [158] Mandal A, Chakrabarty D. “Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization”. Carbohydrate Polymers, 86(3), 1291-1299, 2011.
159. [159] Maiti S, Kaith BS, Jana SC. “Preparation and characterization of nano-cellulose with new shape from different precursor”. Carbohydrate Polymers, 98(1), 562-567, 2013.
160. [160] Rasheed M, Jawaid M, Parveez B, Zuriyati A, Khan A. “Morphological, chemical and thermal analysis of cellulose nanocrystals extracted from bamboo fibre”. International Journal of Biological Macromolecules, 160, 183-191, 2020.
161. [161] Zhao YW, Tian MZ, Huang P. “Starch/clay aerogel reinforced by cellulose nanofibrils for thermal insulation”. Cellulose, 28, 3505-3513, 2021.
162. [162] Arockiasamy FS, Ching YC, Hissa MM, Abdullah LC. “Navigating the nano-world future: Harnessing cellulose nanocrystals from green sources for sustainable innovation”. Heliyon, 11(1), 41188, 2025.