Experimental investigation of the deep drawing parameters of stainless-steel wire mesh structures

Abstract

The increasing use of wire mesh structures in industrial applications has led to a surge of interest in the forming methods of these materials. This paper investigates the practicality of the deep drawing method in shaping wire mesh structures with different weaving types and meshes. The study found that the forming ability of wire meshes with twill weave type is superior to that of plain weaves, and the setting direction directly affects the forming quality. Increasing mesh was found to decrease the formability of the material. Furthermore, experiments with different punch geometries revealed that circular punches with a 5 mm tip radius yielded superior forming performance compared to square and small radius punches. Additionally, it was observed that geometric forms added to the blank holder negatively affected the forming of wire mesh textures, and the forming ability decreased with increasing drawing depth.

Keywords

• Deep drawing
• stainless steel wire
• wire mesh
• formability

Paslanmaz çelik tel örgü yapıların derin çekme parametrelerinin deneysel incelemesi

Abstract

Endüstriyel uygulamalarda tel örgü yapıların kullanımı artmaktadır, dolayısıyla bu tür yapıların şekillendirme yöntemlerine olan ilginin artmasına neden olmuştur. Bu çalışma, farklı dokuma türleri ve sıklığına sahip tel örgü yapıların şekillendirilmesinde derin çekme yönteminin uygulanabilirliğini incelemektedir. Çalışma, dimi dokuma türü tel örgülerin şekillendirme kabiliyetinin düz dokumalardan daha üstün olduğunu ve kesme yönünün şekillendirme kalitesini doğrudan etkilediğini ortaya koymuştur. Dokuma sıklığının artmasının malzemenin şekillendirilebilirliğini azalttığı bulunmuştur. Ayrıca, farklı zımba geometrileriyle yapılan deneyler, 5 mm uç yarıçaplı dairesel zımbaların kare ve küçük yarıçaplı zımbalara kıyasla üstün şekillendirme performansı gösterdiğini ortaya koymuştur. Ek olarak, baskı plakasına eklenen geometrik formların tel örgü dokularının şekillendirilmesini olumsuz etkilediği ve şekillendirme kabiliyetinin çekme derinliğinin artmasıyla azaldığı gözlemlenmiştir.

Keywords

• Derin çekme
• paslanmaz çelik tel
• tel örgü
• şekillendirilebilirlik

References

1. [1] Buckley DH, Rorke KJ. “The performance and applications of metallic wire mesh”. Journal of Material Science, 53(12), 8903-8916, 2018.
2. [2] Gao Z, Zhang H. “Innovative techniques in wire mesh fabrication for enhanced durability”. International Journal of Advanced Manufacturing Technology, 112(5-6), 1051-1060, 2021.
3. [3] Kruger S, Eissner T. “Wire mesh filters for industrial applications: Design and evaluation”. Journal of Filtration Science & Technology, 32(3), 305-315, 2019.
4. [4] Smith AJ. “The use of wire mesh in modern design: Acomprehensive analysis”. Design Principles Journal, 18(7), 67-78, 2022.
5. [5] Liu J. et al. "Application and efficiency of woven wire mesh in wastewater treatment". Environmental Engineering Science, 37(1), 23-32, (2020).
6. [6] Tan Y, Zhang L. "The role of woven wire mesh in the petrochemical industry". Chemical Engineering Journal, 370, 122-130, 2019.
7. [7] Zhao Q, Lin, H. "Molding techniques for custom wire mesh applications". International Journal of Manufacturing Technology and Management, 34(2), 145-161, 2023.
8. [8] Hamed N, Shokrieh MM, Ghaffari R. "Effects of punch geometry on the formability of deep drawing components". Journal of Materials Processing Technology, 278, 116474, 2021.

9. [9] Morteza S, Naderi H. Tabatabaei M. "Analysis of deep drawing process with variable die geometry". International Journal of Advanced Manufacturing Technology, 92(1-4), 1021-1031, 2017.
10. [10] Kumar V, Goyal M. "Study of drawing depth and energy requirement in deep drawing". International Journal of Mechanical Sciences, 177, 105602, 2020.
11. [11] Zhao H, Wang Y, Xu Y. "Selection of die materials in deep drawing applications". Materials Science and Engineering: A, 743, 142-151, 2019.
12. [12] Gotoh M, Yamashta M, Itoh M. “An experimental study on the deep drawing of metal-wire cloth”. Journal of Materials Processing Technology, 138, 564-571, 2003.
13. [13] Pushkar RT, Akshay R, Mohan GB. “Factors affecting the deep drawing process: A review”. Materials Today: Proceedings, 56, 2902-2908, 2022.
14. [14] Chandra PS, Geeta A. “Study of deep drawing process parameters: A review”. International Journal of Scientific and Research Publications, 5(2), 352-366, 2015.
15. [15] Rashmi D, Geeta, A. “Study of deep drawing process parameters”. Materials Today: Proceedings, 4, 820-826, 2017.
16. [16] Padmanabhan R, Oliveira MC, Alves JL, Menezes LF. “Influence of process parameters on the deep drawing of stainless steel”. Finite Elements in Analysis and Design, 43, 1062-1067, 2007.
17. [17] Colgan M, Monaghan J. “Deep drawing process: Analysis and experiment”. Journal of Materials Processing Technology, 132, 35-41, 2003.
18. [18] Kanttikar R, Kodli B, Chikmeti RB. “Analysis on deformation process in deep drawing of sheet metal”. IOSR Journal of Mechanical and Civil Engineering, 11(4), 6-16, 2014.
19. [19] Reddy ACS, Rajesham S, Reddy PR, Kumar TP, Goverdhan J. “An experimental study on effect of process parameters in deep drawing using Taguchi technique”. International Journal of Engineering, Science and Technology, 7(1), 21- 32, 2015.
20. [20] Gavas M, İzciler M. “Effect of blank holder gap on deep drawing of square cups”. Materials & Design, 28, 1641-1646, 2007.