Hava filtresi içindeki akış ve titreşim deseninin karşılaştırılması- deneysel çalışma

Öz

Bu çalışmada, bir hava filtresi imal edilmiş ve filtre kâğıdı üzerinde sıcaklık ve titreşim büyüklüğü değişimi, ters darbeli temizleme yapılarak deneysel olarak tespit edilmiştir. Bu amaçla, sıkıştırılmış temiz ve kuru hava, akışa ters yönlü olarak filtreye doğru 10 ms süreyle 827 kPa sabit basınçla serbest bırakılmıştır. Filtre kâğıdının darbeli temizlenmesi için darbe mesafesi ve lüle etkisi, farklı lüle-filtre mesafeleri ve farklı lüle konumlarında deneysel olarak gözlemlenmiştir. Titreşim genliklerinin büyüklüğü ivme sensörleriyle, sıcaklık değişimleri ise termal kamera kullanılarak elde edilmiştir. Lülenin faklı konumlarda ve mesafelerde kullanımı, titreşim ve sıcaklık dağılımını desenlerini etkilemektedir. Deneylerin sonucunda en homojen titreşim ve sıcaklık dağılımının lülenin dikey konumunda olduğu belirlenmiştir.

Anahtar Kelimeler

• Darbeli temizleme,Titreşim,Lüle etkisi,Hava filtresi,Akış deseni

Comparison between flow and vibration patterns in air filter-experimental study

Abstract

In this study, an air filter was manufactured and variation of temperature and vibration magnitude on filter paper were investigated experimentally by inverse pulse cleaning. For this purpose, compressed clean and dried air was released throughout in the inverse direction of the flow for 10 msec under 827 kPa constant pressure. The effect of nozzle and pulse distance for pulse cleaning of filter paper were observed experimentally under different nozzle-filter distance and different nozzle positions. The magnitude of vibrations and variation of temperature obtained using accelerometers and thermal camera respectively. The usage of nozzle within the different positions and distance effect vibration and temperature patterns. As a result of experimental study, it was determined the most homogeneous vibration and temperature distributions were at vertical position of  nozzle.

Keywords

• Pulse cleaning,Vibration,Nozzle effect,Air filter,Flow pattern

References

1. Li-Ming L, Da-Ren C, David YHP. “Experimental study of plated fabric cartridges in a pulse-jet cleaned dust collector”. Powder Technology, 197, 141-149, 2010.
2. Xiao-qing Dang X, Pang M, Li X, Zhang J, Li Q. “Discussion on influencing factors of the pulse-jet performance of fabric filter”. International Conference on Electric Technology and Civil Engineering, Lushan, China, 22-24 April 2011.
3. Chuah TG, Seville JPK, Withers CJ. “Numerical modelling of reverse pulse cleaning on rigid ceramic filters”. The Institution of Engineers, 60(1), 27-33, 2005.
4. Simon X, Chazelet S, Thomas D, Bemer D, Regnier R. “Experimental study of pulse-jet cleaning of bag filters supported by rigid rings”. Powder Technology, 172(2) , 67-81, 2007.
5. Choi JH, Seo YG, Cung JW. “Experimental study on the nozzle effect of the pulse cleaning for the ceramic filter candle”. Powder Technology, 114(1-3) , 129-135, 2001.
6. Krammer G, Kavouras A, Anzel A. “Optimization of Pulse cleaning frequency during bag filter operation”. Chemical Engineering and Technology, 26(9), 951-955, 2003.
7. Huacang C, Liang Y, Joo-Hong C, Zhongli J. “Optimization of nozzle design for pulse cleaning of ceramic filter”. Chinese Journal of Chemical Engineering, 16(2), 306-313, 2008.
8. Saleem M, Krammer G, Ijaz A. “Effect of operating parameters on stability of jet pulsed bag filter-an experimental study”. 10th World Filtration Congress, Leipzig, Germany, 14-18 April 2008.

9. Chuah TG, Withers CJ, Seville JPK. “Prediction and measurement of the pressure and velocity distrubutions in cyclindical and tapered rigid ceramic filters”. Separation and Purification Technology, 40, 47-60, 2004.
10. Çengel AY, Cimbala JM. Akışkanlar Mekaniği Temelleri ve Uygulamalar. İkinci baskı. İzmir, Türkiye, Güven, 2008.