Ham ve geri dönüştürülmüş pamuk ipliğinden üretilmiş bezayağı ve dimi dokuma kumaşların fiziksel özellikleri

Year 2022, Volume: 28 Issue: 7, 1030 - 1035, 30.12.2022

Gülşah Pamuk Esra Zeynep Yıldız

Abstract

Pamuk, giyim ve moda endüstrisinde önde gelen doğal liflerden birisidir. Bu yüksek talebin nedenlerinden biri, pamuğun doğal kaynaklardan elde edilen, biyolojik olarak parçalanabilen bir elyaf olmasından ötürü çevre açısından güvenli bir ürün olduğu inancıdır. Bununla birlikte, düşünülenin aksine, pamuk elyafının hem yetiştirme hem de işleme sırasında bazı ekolojik sakıncaları da bulunmaktadır. Sentetik polimerlerden elde edilen polyester gibi liflerin geri dönüşümü uzun bir süreden beri yaygın olarak uygulanmaktadır. Atıklardan elde edilip markalanan bazı sentetik iplikler de mevcuttur. Ancak geri dönüşüm oranları ele alındığında, pamuk liflerinde sentetik liflerde olduğu gibi yüksek bir oran ile karşılaşılmamaktadır. Bu durumun nedenlerinden biri, geri dönüştürülmüş veya geri kazanılmış pamuk ürünlerinin kalitesinin yetersiz olduğu görüşüdür. Bu çalışmanın amacı, geri kazanılmış iplikten üretilen pamuklu dokuma kumaşların çeşitli mekanik özelliklerini, karde pamuk ipliğinden elde edilenlerle karşılaştırmak ve bu sayede geri kazanılmış pamuk liflerinin giyim endüstrisindeki potansiyeline dikkat çekmektir. Bunun yanı sıra, çalışmada pamuk yetiştirme ve işlemenin ekolojik sakıncaları ile tekstil endüstrisinin pamuk geri kazanım sürecinde üstesinden gelmesi gereken mevcut zorluklar da ele alınmıştır.

Keywords

Ham pamuk, Geri kazanılmış pamuk, Pamuk yetiştiriciliği

Physical properties of plain and twill woven fabrics produced from carded and recycled cotton yarn

Abstract

Cotton is the leading natural fiber in the apparel and fashion industry. One of the reasons for this high demand is the belief that cotton is an environmentally safe product since cotton is a biodegradable fiber obtained from natural sources. However, contrary to what is conceived, cotton fiber has some ecological drawbacks, both in the cultivation and during processing. Recycling of fibers, such as polyester, obtained from synthetic polymers is widely applied for a long time. Even some synthetic yarns obtained from wastes have been branded. However, in terms of cotton, the recycling ratio does not seem to be as good as synthetic ones. One of the reasons for this situation is the opinion of insufficient quality of recycled or reclaimed cotton products. The purpose of this study was to compare some main mechanical properties of recycled cotton clothing fabrics with the ones obtained from carded cotton and by this way showing the potential of recycled cotton fibers in the clothing industry. Besides that, we summarized the ecological drawbacks of cotton cultivation and processing and reviewed current challenges that the textile industry has to overcome in cotton recycling.

Keywords

Carded cotton, Recycled cotton, Cotton cultivation

References

• [1] Bhatia D, Sharma A, Malhotra U. “Recycled fibers: an overview”. International Journal of Fiber and Textile Research, 4(4), 77-82, 2014.
• [2] Gardetti MA, Torres AL. Sustainability in Fashion and Textiles: Values, Design, Production and Consumption. 1st ed. London, England, Greenleaf Publishing, 2017.
• [3] Businesswire. “Textile and Apparel News: Growth of Global Fashion and Apparel Market Showing No Signs of Slowing”. https://www.businesswire.com/news/home/20170208 006230/en/BizVibe-Textile-Apparel-News-GrowthGlobal-Fashion (20.10.2020).
• [4] Chuayjuljit S, Suuthai S, Charuchinda S, “Poly(vinyl chloride) film filled with microcrystalline cellulose prepared from cotton fabric waste: properties and biodegradability study”. Waste Management & Research, 28, 109-117, 2010.
• [5] Briga-Sá A, Nascimento D, Teixeira N, Pinto J, Caldeira F, Varum H, Paiva A, “Textile waste as an alternative thermal insulation building material solution”. Construction and Building Materials, 38, 155-160, 2013.
• [6] World Wildlife. “Overview”. https://www.worldwildlife.org/industries/cotton (20.10.2020).
• [7] Kurtoğlu Necef Ö, Seventekin N, Pamuk M. “A study on recycling the fabric scraps in apparel manufacturing industry”. Tekstil ve Konfeksiyon, 23(3), 286-289, 2013.
• [8] Ichim M, Sava C. “Study on recycling cotton fabric scraps into yarns”. Textile Technice, 3, 65-68, 2016.
• [9] Niinimiaki K. Sustainable Fashion: New Approaches. 1st ed. Helsinki, Finland, Aalto University Publication Series, 2013.
• [10] The National Cotton Council. “Ginning”. https://www.cotton.org/pubs/cottoncounts/fieldtofabri c/gin.cfm (15.09.2020).
• [11] Chen H, Burns LD. “Environmental analysis of textile products”. Clothing and Textiles Research Journal, 24(3), 248-261, 2006.
• [12] Palm D. “Improved Waste Management of Textiles”. Swedish Environmental Research Institute, Göteborg, Sweden, Scientific Report, B1976, 2011.
• [13] Nakano Y. An Evaluation of the Potential for Wider Use of Recycled Synthetic Materials in the UK High Street Clothing Markets: Its Drivers and Barriers. PhD Thesis, Northumbria University, England, 2009.
• [14] Lu J, Hamouda H. “Current status of fiber waste recycling and its future”. Advanced Materials Research, 878, 122-131, 2014.
• [15] Piribauer B, Bartl A. “Textile recycling processes, State of the art and current developments: A mini review”. Waste Management and Research, 37(2), 112-119, 2019.
• [16] Silva RD, Xungai W, Nolene B. “The separation and utilization of polyester/cotton blends”. 17th Australian Cotton Our Fibre Our Focus Our Future Conference, Gold Coast, Australia, 05-07 August 2014.
• [17] Hasani H. “Effect of different processing stages on mechanical and surface properties of cotton knitted fabrics”. Indian Journal of Fibre & Textile Research, 35, 139-144, 2010.
• [18] Özçelik G, Süpüren G, Gülümser T, Tarakçıoğlu I. “A study on subjective and objective evaluation of the handle properties of shirt fabrics”. Fibres&Textiles in Eastern Europe, 16(3), 56-62, 2008.
• [19] Hu J. Fabric Testing. 1st ed. Cambridge, England, Woodhead Publishing in Textiles, 2008.
• [20] Akaydın M, Can Y. “Pilling performance and abrasion characteristics of selected basic weft knitted fabrics”. Fibres & Textiles in Eastern Europe, 18(2), 51-54, 2010.
• [21] Fridrichova L. “A new method of measuring the bending rigidity of fabrics and its application to the determination of the their anisotropy”. Textile Research Journal, 83(9), 883-892, 2013.
• [22] Özdil N, Özçelik K, Mengüç SG. Analysis of Abrasion Characteristics in Textiles. Editor: Adamiak M. Abrasion Resistance of Materials, 119-146, IntechOpen, 2012.
• [23] Altun Ş. “Recycling, Environmental and Economic Effects of Textile Production and Wastes”. Uşak Ticaret ve Sanayi Odası Raporu, Uşak, Turkey, Scientific Report, 2016.