Optimizing the Rotor Slot Dimensions of Asynchronous Motor Using Different Optimization Methods and Investigating Effects on the Motor Performance

Year 2018, , 1 - 6, 31.03.2018

Burak Yenipınar , Cemal Yılmaz , Yusuf Sönmez Mehmet Fatih Işık

https://doi.org/10.2339/politeknik.372682

Cited By: 2

Abstract

In this paper, finding optimal rotor slot measurements
in asynchronous motors has been realized by using optimization methods
Sequential Nonlinear Programming (SNP), Genetic Algorithm (GA) and Sequential
Mixed Integer Nonlinear Programming (SMINP) and effects of them on the motor
performance have been investigated comparatively. The purpose of the work is to
obtain the slot geometry that provides maximum motor efficiency. Simulation
studies have been done by using Ansys Maxwell package programming. According to
the rotor slot geometry obtained from simulation results, the motor model has
been created in Ansys Maxwell 2D and required analyses of the motor have been
realized. According to the results obtained, the most efficient rotor geometry
has been occurred when using GA.

Keywords

Asynchronous motor design, rotor slot optimization, sequential nonlineer programming, genetic algorithm, sequential mixed integer nonlinear programming

Asenkron Motorlarda Rotor Oluğunun Farklı Optimizasyon Yöntemleri ile Optimizasyonunun Gerçekleştirilmesi ve Performansa Etkilerinin İncelenmesi

Abstract

Bu
çalışmada asenkron motorlarda optimal rotor oluk ölçülerinin, Sequential
Nonlineer Programming (SNP), Genetik Algoritma (GA) ve Sequential Mixed Integer
NonLinear Programming (SMINP) yöntemleri ile bulunması gerçekleştirilmiş ve
karşılaştırmalı olarak motor performansına olan etkisi incelenmiştir.
Gerçekleştirilen optimizasyon çalışmasındaki amaç maksimum motor veriminin
sağlandığı oluk geometrisini elde etmektir. Simülasyon çalışmaları, Ansys
Maxwell paket programı kullanılarak gerçekleştirilmiştir. Gerçekleştirilen
optimizasyon çalışması sonrasında elde edilen rotor oluk geometrisine göre
Ansys Maxwell 2D programında motor modeli oluşturulmuş ve gerekli analizler
gerçekleştirilmiştir. Elde edilen sonuçlara göre, en verimli motor geometrisi
GA algoritması kullanıldığında elde edilmektedir.

Keywords

Asenkron motor tasarımı, rotor oluk optimizasyonu, sequential nonlineer programlama, genetik algoritma, sequential mixed ınteger nonlinear programlama

References

• [1] Çunkas M. and Akkaya R., "Design optimization of induction motor by genetic algorithm and comparison with existing motor" , Mathematical and computational applications, 11(3): 193-203, (2006).
• [2] Kadhim H. H., "Technical and economic design of three phase ınduction motor using the multicriterion optimization method" , Journal of Babylon University, Engineering Sciences, 1(22): (2014).
• [3] www.eie.gov.tr/verimlilik/document/Elektrik_Motorlari. pdf, Erişim: 08.06.2016, 12:05
• [4] Brojboiu M., "Concerning the influence of the rotor bar geometry on the induction motor performances", Proc. of 5th TELSIKS'01 International Conference, Sept. (2001).
• [5] Kirtley J. L., "Designing Squirrel Cage Rotor Slots with High Conductivity", Proc. ofICEM'04 Conference, Sept. (2004).
• [6] Turcanu O.A., Tudorache T. and Fireteanu V., "Influence of squirrel-cage bar cross-section geometry on induction motor performances", Proc. Of SPEEDAM'06, May (2006).
• [7] Şal S., İmeryüz M. and Ergene L. T., “The analysis of the squirrel cage ınduction motor rotor bars under the cost constraint”, EMO Bilimsel Dergi, 2(3): 23 - 28, (2012).
• [8] Ünlükaya, E., Yetkin, A. G., Çanakoğlu, A. İ. and Turan, M., “Rotor Oluk Şekillerinin Asenkron Motor Performansına Etkileri”, Eleco 2014 Elektrik – Elektronik – Bilgisayar ve Biyomedikal Mühendisliği Sempozyumu, Bursa, (2014).
• [9] Simon L. and Monzon J. M., “The finite element method for parametric ıdentification of a three – phase ınduction machine with genetic algorithms”, 11th Spanish Portuguese Conference on Electrical Engineering, (2009).
• [10] Jang S., Jeon K-W., Kim Y-J. and Jung S-Y., “Numerical analysis and optimal design of double squirrel cage ınduction motor for electric vehicle” School of Electronic and Electrical Engineering, Sungkyunkwan Univeristy, Kore, (2013).
• [11] Sivaraju, S.S. and Devarajan, N., "GA based optımal desıgn of three phase squirrel cage induction motor for enhancing performance" , International Journal of Advanced Engineering Technology– E-ISSN 0976-3945
• [12] Fireteanu V., Tudorache T. and Turcanu, O.A., “Optimal design of rotor slot geometry of squirrel-cage type ınduction motors”, Electric Machines & Drives Conference, 1: 537-542, (2007).
• [13] Galindo V. A., Fdez, X. M. L., Pinto, D. J. A. and Coimbra, A. P., “Parametric study of rotor slot shape on a cage ınduction motor”, 10th International Symposium on Electromagnetic Fields in Electrical Engineering, 190 – 195, (2002).