Year 2021, Volume 24 , Issue 2, Pages 655 - 662 2021-06-01

Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)
Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)

Taner AŞÇI [1] , Hakan KESKİN [2]


In this study, investigation of the combustion properties of Oriental beech wood (Fagus orientalis Lipsky) impregnated with boron compound (borax (Na2B4O710H2O), boric acid (H3BO3) doped rosin (C19H29COOH) was aimed. For this purpose, Oriental beech wood samples were prepared according to ASTM E 160-50 and impregnated with boron compound doped rosin by the method of medium-term dipping (24 hours) according to ASTM D 1413 and producers’ definition. Combustion properties of samples after impregnated process were determined according to ASTM E 160-50. As a part of the research, 6 different combination and contents of impregnation materials have been used in order to especially investigate resistance against combustion of wood material treated with boron compounds in different concentrations. As a result of the study, retention performance and leaching resistance of boron compounds can be increased through rosin addition. Consequently, impregnation materials with rosin decreased the flame sourced combustion (Fsc) temperatures depending on kind of impregnation material, extended combustion period and decreased weight loss ratio of the test samples in comparison to the control samples. On the contrary, weight loss ratios were affected negatively in Oriental beech test samples up to 3% when compared with samples which were impregnated with borax. Meanwhile, combustion periods increased in test samples up to 30%. Rosin, in terms of its combustion performance, can be preferred in impregnation with boron compounds depending on kind of wood and using area.
In this study, investigation of the combustion properties of Oriental beech wood (Fagus orientalis Lipsky) impregnated with boron compound (borax (Na2B4O710H2O), boric acid (H3BO3) doped rosin (C19H29COOH) was aimed. For this purpose, Oriental beech wood samples were prepared according to ASTM E 160-50 and impregnated with boron compound doped rosin by the method of medium-term dipping (24 hours) according to ASTM D 1413 and producers’ definition. Combustion properties of samples after impregnated process were determined according to ASTM E 160-50. As a part of the research, 6 different combination and contents of impregnation materials have been used in order to especially investigate resistance against combustion of wood material treated with boron compounds in different concentrations. As a result of the study, retention performance and leaching resistance of boron compounds can be increased through rosin addition. Consequently, impregnation materials with rosin decreased the flame sourced combustion (Fsc) temperatures depending on kind of impregnation material, extended combustion period and decreased weight loss ratio of the test samples in comparison to the control samples. On the contrary, weight loss ratios were affected negatively in Oriental beech test samples up to 3% when compared with samples which were impregnated with borax. Meanwhile, combustion periods increased in test samples up to 30%. Rosin, in terms of its combustion performance, can be preferred in impregnation with boron compounds depending on kind of wood and using area.
  • [1] Ors, Y. and Keskin, H., “Wood material technology,” Gazi Publishing, Ankara, 141-151. (2008).
  • [2] Kartal,S.N., Imamura, Y., “Usage of boron compound as impregnation materials in wood and composites”. 3rd International Boron Symposium, 333, Eskişehir, (2004).
  • [3] Baysal E., Sönmez A., Çolak M., Toker H., “Amount of leachant and water absorption levels of wood treated with borates and water repellents.” Bioresource Technology 97: 2271-2279, (2006).
  • [4] Baysal E., “Fire features of Scots pine wood impregnated with boron compounds and natural tanning materials”. Erciyes University, Journal of Applied Science Institute, 59-61, (2003).
  • [5] Obanda, D., Shupe, T. and Barnes, H.M., “Reducing leaching of boron-based wood preservatives – A review of research,” Bioresource Technology 99, 7312–7322, (2008).
  • [6] Mohareb, A., “Development of leach-resistant boron compounds for wood protectıon ın exterior applications in Egypt.” Ph.D. Thesis, Gent University, (2005)
  • [7] Lesar, B., Kralj, P., Humar, M., “Montan wax improves performance of boron-based wood preservatives”, International Biodeterioration& Biodegradation, 63; 306–310, (2009).
  • [8] Örs, Y. and Keskin, H., “Wood Material Instruction” Gazi University Publish No:. 2000/352, Atlas Publishing, İstanbul, Turkey (2001).
  • [9] Örs, Y., Atar, M., Peker, H., “The impact of different impregnation and surface treatment materials on combustion properties of Scots Pine and Chestnut trees.” Journal of Agriculture and Forestry, 541, (1999).
  • [10] Temiz, A., Gezer E.D., Yıldız, U.C. and Yıldız, S., “Combustion properties of alder (Alnusglutinosa L.) Gaertn. subsp. barbata (C.A. Mey) Yalt.) and southern pine (Pinus sylvestris L.) wood treated with boron compounds,” Construction and Building Materials 22, 2165–2169, (2008).
  • [11] Uysal, B., “The impacts of various chemical materials on combustion resistance of wood material,” Ph.D. Thesis, Gazi University Institute of Applied Sci., Ankara, 96-99, (1997).
  • [12] Uysal, B., Kurt, Ş., “Combustion properties of Oriental Beech and Scots Pine wood impregnated withboron compounds”,I. National Boron Workshop Papers Handbook, 33-41, (2005).
  • [13] Uysal, B., Kurt. Ş., Esen, R., Özcan, C., Yıldırım, M. N., Kılınç, İ., “The impact on combustion resistance of surface treatments applied to the Sapele wood impregnated with some chemicals” 6th International Advanced Technologies Symposium, 267-275, (2011).
  • [14] Giachi, G., Capretti, C., Donato I., Macchioni, N. and Pizzo B., “New trials in the consolidation of waterlogged archaeological wood with different acetone-carried products,” Journal of Archaeological Science 38, 2957-2967, (2011).
  • [15] TS 2476 “Sampling methods for physical and mechanical tests of wood materials and general features,” TSE, Ankara, Turkey, (1976).
  • [16] Ors, Y., Atar M., Keskin, H. and Colakoglu, H.M., “Impacts of impregnation with boron compounds on the surface roughness of some woods and varnished surfaces,” J. of Applied Polymer Science (JAPS), 102(5): 4952-4954, (2006).
  • [17] Unger, A., Schniewind A.P. and Unger W., Conservation of wood artifacts, Handbook, Published by Springer, USA, (2001).
  • [18] ASTM E 160-50, “Standard test method for combustible properties of treated wood by the crib test,” Annual Book of ASTM Standards, West Conshohocken, PA, (1975).
  • [19] ASTM D 1413-99, “Standard method of testing wood preservatives by laboratory soil block cultures,” Annual Book of ASTM Standards, West Conshohocken, PA, (2005).
  • [20] Keskin, H., Ertürk, N.S., Çolakoglu, M.H. and Korkut S. “Combustion properties of rowan wood impregnated with various chemical materials,” International Journal of Physical Sciences (IJPS) 8(19): 1022-1028, (2013).
  • [21] Baysal, E, Yalınkılıç, M.K., Çolak, M., Göktaş, O., “Combustion Properties of Calabrian Pine ( Pinus brutia Ten.) Wood Treated with Vegetable Tanning Extracts and Boron Compounds,” TUBITAK Journal of Agriculture, I.27, 245-252, (2003).
  • [22] Kurt, R., Mengeloğlu, F., “The Effect Of Borıc Acıd / Borax Treatment On Selected Mechanıcal And Combustıon Propertıes Of Poplar Lamınated Veneer Lumber,” Journal of Wood Research 53(2): 113-120, (2008).
  • [23] Wu, G. F., Xu, M., “Effects of boron compounds on the mechanical and fire properties of wood-chitosan and high-density polyethylene composites.” Bioresources, 9(3): 4173-4193, (2014).
  • [24] Wang, F., Liu, J., Lyu, W., “Effect of boron compounds on properties of Chinese fir wood treated with PMUF resin.” Journal of Bioresources and Bioproducts, 4(1): 60–66, (2019).
  • [25] Altuntaş, E., Karaoğul, E., Alma, M.H., “Odun-plastik kompozitlerin termal ve yanma özellikleri üzerine borlu bileşiklerin etkisi.” Turkish Journal of Forestry, 18(3): 247-250, (2017).
Primary Language en
Subjects Engineering
Journal Section Research Article
Authors

Orcid: 0000-0001-5452-2670
Author: Taner AŞÇI (Primary Author)
Institution: Çubuk Bilim ve Sanat Merkezi
Country: Turkey


Orcid: 0000-0001-8753-0554
Author: Hakan KESKİN
Institution: Gazı University
Country: Turkey


Supporting Institution Gazi Üniversitesi, Bilimsel Araştırma Projeleri
Project Number 07/2012-40
Thanks Çalışmayı destekleyen başta danışmanım Prof. Dr. sayın Hakan Keskin olmak üzere BAP yoluyla kıymetli destekler sağlayan Gazi Üniversitesine Teşekkür ederim.
Dates

Application Date : April 25, 2020
Publication Date : June 1, 2021

Bibtex @research article { politeknik726738, journal = {Politeknik Dergisi}, issn = {}, eissn = {2147-9429}, address = {Gazi Üniversitesi Teknoloji Fakültesi 06500 Teknikokullar - ANKARA}, publisher = {Gazi University}, year = {2021}, volume = {24}, pages = {655 - 662}, doi = {10.2339/politeknik.726738}, title = {Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)}, key = {cite}, author = {Aşçı, Taner and Keskin, Hakan} }
APA Aşçı, T , Keskin, H . (2021). Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky) . Politeknik Dergisi , 24 (2) , 655-662 . DOI: 10.2339/politeknik.726738
MLA Aşçı, T , Keskin, H . "Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)" . Politeknik Dergisi 24 (2021 ): 655-662 <https://dergipark.org.tr/en/pub/politeknik/issue/61515/726738>
Chicago Aşçı, T , Keskin, H . "Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)". Politeknik Dergisi 24 (2021 ): 655-662
RIS TY - JOUR T1 - Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky) AU - Taner Aşçı , Hakan Keskin Y1 - 2021 PY - 2021 N1 - doi: 10.2339/politeknik.726738 DO - 10.2339/politeknik.726738 T2 - Politeknik Dergisi JF - Journal JO - JOR SP - 655 EP - 662 VL - 24 IS - 2 SN - -2147-9429 M3 - doi: 10.2339/politeknik.726738 UR - https://doi.org/10.2339/politeknik.726738 Y2 - 2020 ER -
EndNote %0 Politeknik Dergisi Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky) %A Taner Aşçı , Hakan Keskin %T Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky) %D 2021 %J Politeknik Dergisi %P -2147-9429 %V 24 %N 2 %R doi: 10.2339/politeknik.726738 %U 10.2339/politeknik.726738
ISNAD Aşçı, Taner , Keskin, Hakan . "Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)". Politeknik Dergisi 24 / 2 (June 2021): 655-662 . https://doi.org/10.2339/politeknik.726738
AMA Aşçı T , Keskin H . Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky). Politeknik Dergisi. 2021; 24(2): 655-662.
Vancouver Aşçı T , Keskin H . Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky). Politeknik Dergisi. 2021; 24(2): 655-662.
IEEE T. Aşçı and H. Keskin , "Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)", Politeknik Dergisi, vol. 24, no. 2, pp. 655-662, Jun. 2021, doi:10.2339/politeknik.726738