Araştırma Makalesi
BibTex RIS Kaynak Göster

Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature

Yıl 2018, Cilt: 22 Sayı: 6, 1500 - 1507, 01.12.2018
https://doi.org/10.16984/saufenbilder.409328

Öz

In the present study, structural and physical
properties of the PbS thin films produced using chemical bath deposition method
were investigated
.
Deposition temperature was varied between 25 °C and 50 °C throughout the deposition
period.
The pH value of electrolyte solution and the deposition time of the
films were 10.5 and 25 min, respectively
. Characterizations of the PbS thin films
were performed using
scanning electron microscopy (SEM) and X-ray
diffraction (XRD) methods. XRD results showed
that all PbS thin films had a cubic structure irrespective of deposition
temperature
. Morphological
characterizations of the films indicated that not only the number but also the
size of pinholes, formed on the film surfaces, were significantly affected by
the deposition temperature
. Consequently,
the film obtained at 25 ̊C exhibited a surface morphology with less and smaller
pinholes, compared to others deposited at higher deposition temperatures
.

Kaynakça

  • Referans 1 Naresh B. Kotadiya, Anjana J. Kothari,Devendra Tiwari, and Tapas K. Chaudhuri, “Photoconductingnanocrystalline lead sulphide thin films obtained by chemical bath deposition,” Applied Physics A Materials Science & Processing, vol. 108, pp. 819–824, 2000.
  • Referans 2 A.S. Obaid, M.A. Mahdi, Z. Hassan,and M. Bououdina, “PbS nanocrystal solar cells fabricated using microwave-assisted chemical bath deposition,” International Journal of Hydrogen Energy’' , vol. 38, pp. 807–815,2013.
  • Referans 3 A. N. Fouda, M. Marzook, H. M.AbdEl-Khalek, S. Ahmed, E. A. Eid, and A. B.El Basaty,“Structural and Optical Characterization of Chemically Deposited PbS Thin Films, ”Springer Science+Business Media Dordrecht Silicon vol. 9, pp. 809-816, 2017.
  • Referans 4 Alex P. Gaiduk, Peter I. Gaiduk, and Arne Nylandsted Larsen, “Chemical bath deposition of PbS nanocrystals: Effect of substrate,” Thin Solid Films, vol. 516 pp. 3791–3795, 2008.
  • Referans 5 H. Soetedjo, B. Siswanto, I. Azizand S. Sudjatmoko, “Low Resistivity Of Cu And Fe Doped Pbs Thin Films Prepared Using DC Sputtering Techniqueh,” Journal of Non-Oxide Glasses,vol. 9, No 2, p. 55 – 63, 2017.
  • Referans 6 E. Pentia, L. Pintilie, T. Botila, I. Pintilie,A. Chaparro, and C. Maffiotte, “Bi influence on growth and physical properties of chemical deposited PbS films,” Thin Solid Films, vol. 434, pp. 162–170, 2003.
  • Referans 7 J. P., Nair, R., Jayakrishnan, C. B. Nandu, and R. KPandley, “''In situ Sb-doped CdTe Films,” Semicond. Science and Technology, vol. 13, no. 3, pp. 340, 1998.
  • Referans 8 S. B., Park, S. W., Moon, and I. S. Woo, ''Preparation and characterization of lead zirconate titanate thin flims,'' Thin Solid Films,vol.339, pp. 77, 81,2000.
  • Referans 9 P. K., Manoj, , K. G., Gopchandran, P.,Koshy, V. K., Vaidyan, and Josephc, B., ''Growth and characterization of indium oxide thin films prepared by spray pyrolysis,'' Optical Materials,Vol. 28, No. 12, pp. 1405-1411.
  • Referans 10 M., Saleem, Fang, L., Liang,A., Wakeel, M., Rashad, ve C. Y. Kong, ''Simple preparation and characterization of nano-crystalline zinc oxide thin films by sol-gel method on glass substrate,'' World Journal of Condensed Matter Physics, No. 2, pp.10-15, 2012.
  • Referans 11 Cullity B.D., “ X-Işınlarının Difaksiyonu”, Çeviren; Sümer A., İTÜ Fizik Profesörü, İstanbul Teknik Üniversite Matbaası Gümüşsuyu, 1966.
  • Referans 12 A. Hussain, A.Begum, and A. Rahman ‘‘Characterization of Nanocrystalline Lead Sulphide Thin Films Prepared by Chemical Bath Deposition Technique’, Arabian Journal for Science and Engineering, Vol. 38 No. 1, pp.169–174, 2013.
  • Referans 13 S. Rajathi, K. Kirubavathi, and K Selvaraju ‘‘Structural, morphological, optical, and photoluminescence properties of nanocrystalline PbS thin films grown bychemical bath deposition’, Arabian Journal of Chemistry, 2015
Yıl 2018, Cilt: 22 Sayı: 6, 1500 - 1507, 01.12.2018
https://doi.org/10.16984/saufenbilder.409328

Öz

Kaynakça

  • Referans 1 Naresh B. Kotadiya, Anjana J. Kothari,Devendra Tiwari, and Tapas K. Chaudhuri, “Photoconductingnanocrystalline lead sulphide thin films obtained by chemical bath deposition,” Applied Physics A Materials Science & Processing, vol. 108, pp. 819–824, 2000.
  • Referans 2 A.S. Obaid, M.A. Mahdi, Z. Hassan,and M. Bououdina, “PbS nanocrystal solar cells fabricated using microwave-assisted chemical bath deposition,” International Journal of Hydrogen Energy’' , vol. 38, pp. 807–815,2013.
  • Referans 3 A. N. Fouda, M. Marzook, H. M.AbdEl-Khalek, S. Ahmed, E. A. Eid, and A. B.El Basaty,“Structural and Optical Characterization of Chemically Deposited PbS Thin Films, ”Springer Science+Business Media Dordrecht Silicon vol. 9, pp. 809-816, 2017.
  • Referans 4 Alex P. Gaiduk, Peter I. Gaiduk, and Arne Nylandsted Larsen, “Chemical bath deposition of PbS nanocrystals: Effect of substrate,” Thin Solid Films, vol. 516 pp. 3791–3795, 2008.
  • Referans 5 H. Soetedjo, B. Siswanto, I. Azizand S. Sudjatmoko, “Low Resistivity Of Cu And Fe Doped Pbs Thin Films Prepared Using DC Sputtering Techniqueh,” Journal of Non-Oxide Glasses,vol. 9, No 2, p. 55 – 63, 2017.
  • Referans 6 E. Pentia, L. Pintilie, T. Botila, I. Pintilie,A. Chaparro, and C. Maffiotte, “Bi influence on growth and physical properties of chemical deposited PbS films,” Thin Solid Films, vol. 434, pp. 162–170, 2003.
  • Referans 7 J. P., Nair, R., Jayakrishnan, C. B. Nandu, and R. KPandley, “''In situ Sb-doped CdTe Films,” Semicond. Science and Technology, vol. 13, no. 3, pp. 340, 1998.
  • Referans 8 S. B., Park, S. W., Moon, and I. S. Woo, ''Preparation and characterization of lead zirconate titanate thin flims,'' Thin Solid Films,vol.339, pp. 77, 81,2000.
  • Referans 9 P. K., Manoj, , K. G., Gopchandran, P.,Koshy, V. K., Vaidyan, and Josephc, B., ''Growth and characterization of indium oxide thin films prepared by spray pyrolysis,'' Optical Materials,Vol. 28, No. 12, pp. 1405-1411.
  • Referans 10 M., Saleem, Fang, L., Liang,A., Wakeel, M., Rashad, ve C. Y. Kong, ''Simple preparation and characterization of nano-crystalline zinc oxide thin films by sol-gel method on glass substrate,'' World Journal of Condensed Matter Physics, No. 2, pp.10-15, 2012.
  • Referans 11 Cullity B.D., “ X-Işınlarının Difaksiyonu”, Çeviren; Sümer A., İTÜ Fizik Profesörü, İstanbul Teknik Üniversite Matbaası Gümüşsuyu, 1966.
  • Referans 12 A. Hussain, A.Begum, and A. Rahman ‘‘Characterization of Nanocrystalline Lead Sulphide Thin Films Prepared by Chemical Bath Deposition Technique’, Arabian Journal for Science and Engineering, Vol. 38 No. 1, pp.169–174, 2013.
  • Referans 13 S. Rajathi, K. Kirubavathi, and K Selvaraju ‘‘Structural, morphological, optical, and photoluminescence properties of nanocrystalline PbS thin films grown bychemical bath deposition’, Arabian Journal of Chemistry, 2015
Toplam 13 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Metroloji,Uygulamalı ve Endüstriyel Fizik
Bölüm Araştırma Makalesi
Yazarlar

Ayça Kıyak Yıldırım 0000-0002-8339-947X

Barış Altıokka 0000-0001-8891-973X

Yayımlanma Tarihi 1 Aralık 2018
Gönderilme Tarihi 25 Mart 2018
Kabul Tarihi 2 Mayıs 2018
Yayımlandığı Sayı Yıl 2018 Cilt: 22 Sayı: 6

Kaynak Göster

APA Kıyak Yıldırım, A., & Altıokka, B. (2018). Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 22(6), 1500-1507. https://doi.org/10.16984/saufenbilder.409328
AMA Kıyak Yıldırım A, Altıokka B. Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature. SAUJS. Aralık 2018;22(6):1500-1507. doi:10.16984/saufenbilder.409328
Chicago Kıyak Yıldırım, Ayça, ve Barış Altıokka. “Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature”. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 22, sy. 6 (Aralık 2018): 1500-1507. https://doi.org/10.16984/saufenbilder.409328.
EndNote Kıyak Yıldırım A, Altıokka B (01 Aralık 2018) Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 22 6 1500–1507.
IEEE A. Kıyak Yıldırım ve B. Altıokka, “Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature”, SAUJS, c. 22, sy. 6, ss. 1500–1507, 2018, doi: 10.16984/saufenbilder.409328.
ISNAD Kıyak Yıldırım, Ayça - Altıokka, Barış. “Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature”. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 22/6 (Aralık 2018), 1500-1507. https://doi.org/10.16984/saufenbilder.409328.
JAMA Kıyak Yıldırım A, Altıokka B. Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature. SAUJS. 2018;22:1500–1507.
MLA Kıyak Yıldırım, Ayça ve Barış Altıokka. “Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature”. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, c. 22, sy. 6, 2018, ss. 1500-7, doi:10.16984/saufenbilder.409328.
Vancouver Kıyak Yıldırım A, Altıokka B. Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature. SAUJS. 2018;22(6):1500-7.

30930 This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.