Research Article
BibTex RIS Cite

A Model Of The Laser Printing

Year 2014, Volume: 9 Issue: 1, 186 - 192, 15.07.2014

Abstract

In a laser printer system a thin layer, sandwiched between two plastic sheets, is heated by a laser. The dye melts and diffuses into the sheets, the diffusion coefficient being a sensitive function of temperature. The problem is to determine the amount of dye which has diffused into the sheets at time t . The axisymmetric unsteady temperature field produced by the laser is determined and then the dye field is found by solving a diffusion equation using a temperature sensitive diffusion coefficient. The model is used to predict the fraction of dye transferred to the receiver sheet at each radial position after a time which is long compared with the heating time

References

  • Hann R.A., Beck N.C., 1990. Dye Diffusion Thermal Transfer (D2T2) Color Printing, J. Imag. Tech. 16: 238-241.
  • Hutt W., Stephenson I.R., Tran H.C.V., Kaneko A., Hann R.A., 1992. IS and T Eighth Int. Congr. On Adv. In Non-Impact Printing Tech. p.367-369.
  • Hann R.A., 1992. Thermal Dye Diffusion Printing- How Does it Work. IS and T Eighth Int. Congr. On Adv. in Non-Impact Printing Tech. p.361-363.
  • Egashira N., Mochizuki C., Aimino Y., Lior N., 1991.Dye Transfer by Laser Heat. IS and T Seventh Int. Congr. on Adv. in Non-Impact Printing Tech. p.167-170.
  • Irie M., Kitamura T., 1993. High Definition Thermal Transfer Printing using Laser Heating, J. Imag. Sci. And Tech. Vol. 37.(3).231-235.
  • Uyhan R., 2000. Thermal Dye Diffusion Printing. PhD thesis, University of Manchester, Manchester-UK p. 120 .
  • Beck N.C., Hann R.A., 1986. Thermal Transfer Printing Project. Measurement of the Diffusion Coefficient of Dyes in a Range of Polyesters. ICI Imagedata repor, p. 18-23.

Bir Laser Yazıcının Modeli

Year 2014, Volume: 9 Issue: 1, 186 - 192, 15.07.2014

Abstract

Laser yazıcılar sisteminde ince bir tabaka, sandviç şeklindeki iki plastik tabaka arasında bir laser ile ısıtılır. Boya tabakalar arasında erir ve dağılır, yayılma katsayısı sıcaklık fonksiyonuna bağlıdır. Problem t zamanında tabakalar arasında yayılmış boya miktarını hesaplamaktır. Laser ile üretilen eksensel sabit sıcaklık durumu hesaplanır, daha sonra sıcaklığa bağlı yayılma katsayısı kullanılarak yayılma denklemi çözülür ve boya miktarı bulunur. Model, alıcı tabakaya transfer olan boya oranını tahmin etmek ve daha sonra sıcaklık zamanı ile açısal durumu karşılaştırmaktır.

References

  • Hann R.A., Beck N.C., 1990. Dye Diffusion Thermal Transfer (D2T2) Color Printing, J. Imag. Tech. 16: 238-241.
  • Hutt W., Stephenson I.R., Tran H.C.V., Kaneko A., Hann R.A., 1992. IS and T Eighth Int. Congr. On Adv. In Non-Impact Printing Tech. p.367-369.
  • Hann R.A., 1992. Thermal Dye Diffusion Printing- How Does it Work. IS and T Eighth Int. Congr. On Adv. in Non-Impact Printing Tech. p.361-363.
  • Egashira N., Mochizuki C., Aimino Y., Lior N., 1991.Dye Transfer by Laser Heat. IS and T Seventh Int. Congr. on Adv. in Non-Impact Printing Tech. p.167-170.
  • Irie M., Kitamura T., 1993. High Definition Thermal Transfer Printing using Laser Heating, J. Imag. Sci. And Tech. Vol. 37.(3).231-235.
  • Uyhan R., 2000. Thermal Dye Diffusion Printing. PhD thesis, University of Manchester, Manchester-UK p. 120 .
  • Beck N.C., Hann R.A., 1986. Thermal Transfer Printing Project. Measurement of the Diffusion Coefficient of Dyes in a Range of Polyesters. ICI Imagedata repor, p. 18-23.
There are 7 citations in total.

Details

Primary Language English
Subjects Mathematical Sciences
Journal Section Makaleler
Authors

Ramazan Uyhan

Publication Date July 15, 2014
Published in Issue Year 2014 Volume: 9 Issue: 1

Cite

IEEE R. Uyhan, “A Model Of The Laser Printing”, Süleyman Demirel University Faculty of Arts and Science Journal of Science, vol. 9, no. 1, pp. 186–192, 2014.