Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting

Cihan Doğruöz; Naci Bölükbaşı

doi:10.19113/sdufbed.44433

Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting

Abstract

The effects of rock mechanics parameters on performance of various tunneling and excavation machines used in tunneling application has been an important issue in conventional, NATM, and TBM tunneling. Mechanical feature of machine performance is important for cutting specific energy and cutting parameters. Specific Energy (SE) of rock excavation depends on rock features such as uniaxial compressive strength (UCS), Brazilian tensile strength (BTS) and standard cone indenter hardness (Is), as well as bit shape and size, cutterhead design, and cut geometry. In this study, impact of cone indenter hardness on SE has been examined and results of statistical analysis on laboratory data related to linear scale cutting of various rock types with different pick cutters are discussed. The results shows that there is a strong relationship between cone indenter hardness and laboratory specific energy. The cone indenter hardness results are between 0.30 MPa and 3.63 MPa. The tests were applied on weak and moderate rocks types. Based on the test results, two different prediction models were created using second order functional regression analyses.

Keywords

Mechanical rock excavation,Specific energy; Cone indenter hardness

References

[1] Thuro, K.,Plinninger, R.J.,1998, ‘Geological Limits in Roadheader Excavation-Four Case Studies’. 8th International IAEG Congress, Balkema, Rotterdam, 21-25 September.
[2] Neil, D.M., Rostami, J., Ozdemir, L. and Gertsch, R.,1994, ‘Production Estimating Techniques for Underground Mining Using Roadheaders’. SME, AIME Annual Meeting, Albuquerque, New Mexico.
[3] Bölükbaşı, N. 1986. Yeraltı Kömür ve Ayak Kazı Mekanizasyonu, TKİ Genel Müdürlüğü Seminerleri No.4, METU, Ankara.
[4] Tucker, R. H. 1985. Improvement of Potential in Mining Development and Tunneling Systems in the National Coal Board. The Mining Engineer, pp.663-669, June.
[5] Bilgin, N., Balci, C., Acaroglu, Ö., Tunçdemir, H., Eskikaya, Ş. 1998. Design and Selection Criteria of Surface Continuous Miners for Open Pit Mining, Using Turkish Coal Mine as an Example. 5th International Symposium, May, Wroclaw
[6] Çopur, H. 2010. Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines. International of Rock Mecanicsh & Mining Science, 47:1:104-120.
[7] Rostami,J. 2012. SME Handbook
[8] Çopur, H., Ozdemir, L. Rostami, J. 1998. Roadheader applications in mining and tunnel industry. The Mining Engineering:38-42.

[9] MRDE, 1977. NCB Cone Indenter. Handbook No.5, Burton on Trent, 12p.
[10] McFeat-Smith, I. 1980. Correlation of Rock Properties and Tunnel Machine Performance in Selected Sedimentary Rocks. Ph.D. Thesis, University of Newcastle upon Tyne, June.
[11] Fowell, R. J., Pycroft, A. S. 1980. Rock Machinability Studies For The Assessment of Selective Tunnelling Machine Performance. 21st National Rock Mechanics Symp. USA, Miss.pp.149-158.
[12] Bilgin, N., Yazıcı, S. Eskikaya, S. 1996. A Model to predict the performance of Roadheaders and impact hammers in tunnel drivages. EUROCK ’96:710-721.
[13] Thuro, K., Plinninger, R. J. 1999. Roadheader excavation performance – Geological and geotechnical influences. 9th ISRM Congress Paris, Theme 3: Rock dynamics and tectonophysics/Rock cutting and drilling, 25-28.
[14] Bilgin, N., Seyrek, T., Erdinc, E., Shahriar, K. 1990. Roadheaders clean valuable tips for Istanbul Metro. Tunnels and Tunneling, 29–32.
[15] Balci, C., Demircin, M.A., Copur, H., Tuncdemir, H., 2004. Estimation of optimum specific energy based on rock properties for assessment of roadheader performance. December issue, The Journal of The South African Institute of Mining and Metallurgy.
[16] Eskikaya, S., Bilgin, N., Dincer, T., Ozdemir, L. 1998. A model to predict the cutting performance of rapid excavation systems. Proceedings of the 7. International Symposium on Mine Planning and Eq. S., Calgary, Rotterdam: 575–579.
[17] Ergin, H., Acaroglu, O. 2007. The effect of machine design parameters on the stability of a Roadheader, Tunnelling and Underground Space Technology. 22(1):80-89.
[18] Ocak, I., Bilgin, N. 2010. Comparative studies on the performance of a Roadheader, impact hammer and drilling and blasting method in the excavation of metro station Tunnels in Istanbul. Tunneling and Underground Space Technology25: 181-187.
[19] Thuro, K., Plinninger, R.J. 1998. Geological limits in Roadheader Excavation. Four Case Studies, 8th Int. IAEG Congress, Rotterdam, 21-25.
[20] Yetkin, M.E., Ozfirat, M.K., Yenice, H., Simsir, F., Kahraman, B. 2016. Examining the relation betweenrock mass cuttability index and rock drilling properties. Journal of African Earth Sciences, 124: 151-158.
[21] Dogruoz, C., 2010. Effect of pick blunting on cutting performance for weak-moderate rocks. PhD Thesis, Middle East Technical University, Dept. of Mining Engineering, Turkey.
[22] Montgomery, D.C. 1997. Design and Analyses of Experiments. 5th Edition, Arizona State University, 1997

Details

Primary Language

Turkish

Subjects

-

Journal Section

-

Authors

Cihan Doğruöz This is me

Naci Bölükbaşı This is me

Publication Date

October 20, 2017

Submission Date

November 30, 2016

Acceptance Date

-

Published in Issue

Year 2017 Volume: 21 Number: 3

DOI

https://doi.org/10.19113/sdufbed.44433

IZ

https://izlik.org/JA67US95SJ

Cite

RIS / Bibtex

APA

Doğruöz, C., & Bölükbaşı, N. (2017). Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 21(3), 743-748. https://doi.org/10.19113/sdufbed.44433

AMA

1.Doğruöz C, Bölükbaşı N. Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting. J. Nat. Appl. Sci. 2017;21(3):743-748. doi:10.19113/sdufbed.44433

Chicago

Doğruöz, Cihan, and Naci Bölükbaşı. 2017. “Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 21 (3): 743-48. https://doi.org/10.19113/sdufbed.44433.

EndNote

Doğruöz C, Bölükbaşı N (December 1, 2017) Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 21 3 743–748.

IEEE

[1]C. Doğruöz and N. Bölükbaşı, “Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting”, J. Nat. Appl. Sci., vol. 21, no. 3, pp. 743–748, Dec. 2017, doi: 10.19113/sdufbed.44433.

ISNAD

Doğruöz, Cihan - Bölükbaşı, Naci. “Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 21/3 (December 1, 2017): 743-748. https://doi.org/10.19113/sdufbed.44433.

JAMA

1.Doğruöz C, Bölükbaşı N. Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting. J. Nat. Appl. Sci. 2017;21:743–748.

MLA

Doğruöz, Cihan, and Naci Bölükbaşı. “Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol. 21, no. 3, Dec. 2017, pp. 743-8, doi:10.19113/sdufbed.44433.

Vancouver

1.Cihan Doğruöz, Naci Bölükbaşı. Effect of Cone Indenter Hardness on Specific Energy of Rock Cutting. J. Nat. Appl. Sci. 2017 Dec. 1;21(3):743-8. doi:10.19113/sdufbed.44433

Cited By

A review on rock hardness testing methods and their applications in rock engineering

Arabian Journal of Geosciences

https://doi.org/10.1007/s12517-022-10314-z