Silikon Karbür Nanotüplerin (SICNT) Sıcak Karışım Asfaltın Suya Duyarlılığına ve Mekanik Özelliklerine Etkisi

Abstract

Asfalt kaplamalar nemin etkisiyle zarar görmektedir. Sudan kaynaklanan bozulmalar ile dayanım kaybı oluşmaktadır. Asfalt karışımlarda sudan kaynaklanan bozulmaların önüne geçebilmek için soyulma önleyici malzemeler kullanılmaktadır. Bitüm modifikasyonu da sudan kaynaklanan bozulmaları önlemede etkili bir metottur. Bu amaçla, bu çalışmada, bitüm silikon karbür nanotüplerle (SiCNT) üç farklı oranda (ağırlıkça %1, %3 ve %5) modifiye edilmiştir. Modifikasyon gerçekleştirildikten sonra asfalt karışımlar Superpave tasarım yöntemine göre tasarlanmıştır. Silikon karbür ile modifiye edilmiş asfalt karışımların suya karşı duyarlılığı İndirekt Çekme Dayanımı testi ile belirlenmiştir. Sonuç olarak, SiCNT modifikasyonu iki oranda (%3 ve %5) şartname limitini sağlamıştır.

Keywords

• Silikon karbür nanotüp,Bitüm modifikasyonu,İndirekt çekme dayanımı,Nem hassasiyeti

Effect of Silicon Carbide Nanotube (SiCNT) on the Mechanical Properties and Moisture Susceptibility of Hot Mix Asphalt

Abstract

Asphalt pavements are damaged by moisture. Strength loss is caused by moisture damage. Anti-stripping agent is used to address this damage in asphalt mixtures. Bitumen modification is also effective method to prevent moisture damage. To this aim, in this study, bitumen was modified by silicon carbide nanotube (SiCNT) in three percentages (1%, 3% and 5%) by weight. After the modification effort was performed, asphalt mixtures were designed according to SuperpaveTM procedure. Indirect Tensile (IDT) Strength test was employed determining moisture damage in asphalt mixtures modified by SiCNT. As a result, moisture susceptibility of two percentages (3% and 5%) of SiCNT ensured the specification limit.

Keywords

• Silicon carbide nanotube,Bitumen modification,Indirect tensile strength,Moisture susceptibility

References

1. [1] Li, R., Xiao, F., Amirkhanian, S., You, Z., Huang, J. 2017. Developments of nano materials and technologies on asphalt materials–A review. Construction and Building Materials, 143, 633-648.
2. [2] Mostafa, A. E. A. 2016. Examining the Performance of Hot Mix Asphalt Using Nano- Materials. IOSR Journal of Engineering, 6(2), 25-34.
3. [3] Zalnezhad, H., Galooyak, S. S., Farahani, H., Goli, A. 2015. Investigating the effect of nano-silica on the specification of the sasobit warm mix asphalt.Petroleum & Coal, 57(5), 509-515.
4. [4] Zafari, F., Rahi, M., Moshtagh, N., Nazockdast, H. 2014. The improvement of bitumen properties by adding nanosilica. Study of Civil Engineering and Architecture, 3(1), 62-69.
5. [5] Sadeghpour Galooyak, S., Palassi, M., Goli, A., Zanjirani Farahani, H. 2015. Performance evaluation of nano-silica modified bitumen. International Journal of Transportation Engineering, 3(1), 55-66.
6. [6] Enieb, M., Diab, A. 2017. Characteristics of asphalt binder and mixture containing nanosilica. International Journal of Pavement Research and Technology, 10(2), 148-157.
7. [7] Shafabakhsh, G. H., Ani, O. J. 2015. Experimental investigation of effect of Nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates. Construction and Building Materials, 98, 692-702.
8. [8] Tanzadeh, J., Vahedi, F., Kheiry, P. T., Tanzadeh, R. 2013. Laboratory study on the effect of nano TiO2 on rutting performance of asphalt pavements. In Advanced materials research 622-623, 990-994.

9. [9] Akbulut, H. 2013. Viscous behavior of asphaltic mixtures: Simplified fatigue test methods. Indian Journal of Engineering and Materials Sciences, 10, 161-165.
10. [10] Motlagh, A. A., Kiasat, A., Mirzaei, E., Birgani, F. O. 2012. Bitumen modification using carbon nanotubes. World Applied Sciences Journal, 18(4), 594-599.
11. [11] Yilmaz A., Sargin, S. 2012. Water Effect on Deteriorations of Asphalt Pavements. The Online Journal of Science and Technology, 2 (1), 1-6.
12. [12] Hamedi, G. H., Nejad, F. M., Oveisi, K. 2016. Estimating the moisture damage of asphalt mixture modified with nano zinc oxide. Materials and Structures, 49(4), 1165-1174.
13. [13] Azarhoosh, A., Moghaddas Nejad, F., Khodaii, A. 2018. Evaluation of the effect of nano-TiO2 on the adhesion between aggregate and asphalt binder in hot mix asphalt. European Journal of Environmental and Civil Engineering, 22(8), 946-961.
14. [14] Nabiun, N., Khabiri, M. M. 2016. Mechanical and moisture susceptibility properties of HMA containing ferrite for their use in magnetic asphalt. Construction and Building Materials, 113, 691-697.
15. [15] Hossain, Z., Zaman, M., Hawa, T., Saha, M. C. 2015. Evaluation of moisture susceptibility of nanoclay-modified asphalt binders through the surface science approach. Journal of Materials in Civil Engineering, 27(10), 04014261.
16. [16] Behbahani, H., Ziari, H., Kamboozia, N., Khaki, A. M., Mirabdolazimi, S. M. 2015. Evaluation of performance and moisture sensitivity of glasphalt mixtures modified with nanotechnology zycosoil as an anti-stripping additive. Construction and Building Materials, 78, 60-68.
17. [17] Yao, H., Dai, Q., You, Z. 2015. Chemo-physical analysis and molecular dynamics (MD) simulation of moisture susceptibility of nano hydrated lime modified asphalt mixtures. Construction and Building Materials, 101, 536-547.
18. [18] Hamedi, G. H., Moghadas Nejad, F., Oveisi, K. 2015. Investigating the effects of using nanomaterials on moisture damage of HMA. Road Materials and Pavement Design, 16(3), 536-552.
19. [19] Iskender, E. 2016. Evaluation of mechanical properties of nano-clay modified asphalt mixtures. Measurement, 93, 359-371.
20. [20] Hamedi, G. H. 2017. Evaluating the effect of asphalt binder modification using nanomaterials on the moisture damage of hot mix asphalt. Road Materials and Pavement Design, 18(6), 1375-1394.
21. [21] Ziari, H., Mirzababaei, P., Babagoli, R. 2016. Properties of bituminous mixtures modified with a nano-organosilane additive. Petroleum Science and Technology, 34(4), 386-393.
22. [22] Babagoli, R., Mohammadi, R., Ameri, M. 2017. The rheological behavior of bitumen and moisture susceptibility modified with SBS and nanoclay. Petroleum Science and Technology, 35(11), 1085-1090.
23. [23] Zahedi, M., Baharvand, B. 2017. Experimental study of Nano clay and crumb rubber influences on mechanical properties of HMA. Journal of Civil Engineering and Structures, 1(1), 10-24.
24. [24] Arabani, M., Hamedi, G. H. 2014. Using the surface free energy method to evaluate the effects of liquid antistrip additives on moisture sensitivity in hot mix asphalt. International Journal of Pavement Engineering, 15(1), 66-78.