BibTex RIS Cite

Lif Türü ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi

Year 2016, Volume: 20 Issue: 2, 0 - , 27.05.2016

Abstract

Yalancı büküm yöntemi içerisinde yeni bir gelişme olarak değerlendirilen vortex iplik üretim sistemi (MVS-Murata Vortex Spinning), yeni iplikçilik sistemleri arasında gelecek vaad eden bir sistem olarak değerlendirilmektedir. Bu nedenle, bu çalışmada lif türü, lif karışımı ve iplik inceliğine bağlı olarak iplik özelliklerindeki değişim analiz edilmiştir. Çalışmada, Ne 20/1, Ne 30/1, Ne 40/1 ve Ne 50/1 dört farklı iplik inceliğine sahip polyester, pamuk-polyester (%30/70) karışımı ve viskon ipliklerin iplik özellikleri yanında Ne 30/1 polyester, pamuk-polyester (%30/70 ve %50/50), viskon, polyester-viskon (%65/35), modal ve pamuk-modal (%50/50) karışımı vortex ipliklerin iplik özellikleri incelenmiştir. Elde edilen sonuçlar, literatürde mevcut farklı çalışmalarla karşılaştırılmıştır.

References

  • [1] Oxenham, W., 2000. Fasciated Yarns-A Revolutionary Development. Journal of Textile Apparel Technology Management (JTATM), Sayı 1, No 2, 1-7.
  • [2] Soe, A.K., Takahashi, M., Nakajima, M., 2004. Structure And Properties Of MVS Yarns In Comparison With Ring Yarns And Open End Rotor Spun Yarns. Textile Research Journal, 74 (9), 819-826.
  • [3] Örtlek, G., Ülkü, Ş., 2005a. Effect of Some Variables on Properties of 100% Cotton Vortex Spun Yarns. Textile Research Journal, 75 (6)0, 458-461.
  • [4] Başal, G., Oxenham, W., 2003. Vortex Spun Yarns VS. Air-Jet Spun Yarn. AUTEX Research Journal, 3 (3), 96-100.
  • [5] Rameshkumar, C., Anandkumar, P., Senthilnathan, P., Jeevitha, R., Anbumani, N., 2008. Comparitive Studies On Ring Rotor And Vortex Yarn Knitted Fabrics0, AUTEX Research Journal, Vol. 80, No 4, December 2008, s. 100-106.
  • [6] Kılıç, M., Okur, A., 2011. The properties of cotton-Tencel and cotton-Promodal blended yarns spun in different spinning systems, Textile Research Journal, 81(2), 156–172.
  • [7] Tyagi, G.K., Sharma, D., 2004. Performance and Low-Stress Characteristics Of Polyester-Cotton MVS Yarns. Indian Journal of Fibre&Textile Research, 29, 301-307.
  • [8] Örtlek, G., Ülkü, Ş., 2005b. Pilling And Abrasion Performances Of Murata Vortex Spun Cotton Yarns. Melliand International, 11, 4/2005, 1-3.
  • [9] Gordon, S., 2001. The Effect Of Short Fibre And Nep Levels On Murata Vortex Spinning Efficiency And Product Quality. www.tft.csiro.au. Erişim Tarihi: 11.07.2007.
  • [10] Beceren, Y., Nergis, B.U., 2008. Comparison of the Effects of Cotton Yarns Produced by New, Modified and Conventional Spinning Systems on Yarn and Knitted Fabric Performance, Textile Research Journal, 78 (4), s. 297–330, DOI: 10.1177/0040517507084434.
  • [11] Erdumlu, N., Özipek, B., Öztuna, A.S., Çetinkaya, S., 2009. Investigation Of Vortex Spun Yarn Properties In Comparison With Conventional Ring And Open-End Rotor Spun Yarns. Textile Research Journal, 79 (7), 585-595.
  • [12] Karalı, K., Sakarya, S., Yılmaz, D., 2009. Vortex İplik Eğirme Sisteminin, Konvansiyonel Ring Ve Kompakt İplik Eğirme Sistemleriyle İplik Ve Kumaş Performansı Açısından Karşılaştırılması, Tekstil Teknik Dergisi, Sayı 297, Ekim, s. 96-109.
  • [13] Tyagi, G.K., Sharma, D., Salhotra, K.R., 2004a. Process-Structure-Property Relationship Of Polyester-Cotton MVS Yarns: Part I-Influence Of Processing Variables On Yarn Structural Parameters. Indian Journal of Fibre&Textile Research, 290, 419-428.
  • [14] Tyagi, G.K., Sharma, D., Salhotra, K.R., 2004b. Process-Structure-Property Relationship Of Polyester-Cotton MVS Yarns: Part II-Influence Of Process Variables On Yarn Characteristics. Indian Journal of Fibre&Textile Research, 290, 429-435.
  • [15] Başal, G., Oxenham, W., 2006. Effects Of Some Process Parameters On The Structure And Properties Of Vortex Spun Yarn. Textile Research Journal, 76 (6), 492-499.
  • [16] Örtlek, H.G., 2006. Influence of Selected Process Variables on the Mechanical Properties of Core-Spun Vortex Yarns Containing Elastane, Fibres & Textiles in Eastern Europe, July / September, Vol. 14, No. 3 (57), s. 42-44.
  • [17] Zhuanyong Z., Shaoming Z., Longdi C., Bojun X., Jiangwei Y., 2014. Effect of Some Variables on the Fibre Packing Pattern in a Yarn Cross-section for Vortex Spun Yarn, Fibres & Textiles in Eastern Europe, Vol. 22, No. 2(104), 40-46.
  • [18] Erdumlu N., 2011. An Approach to İnvestigate the Spinnability of Fine Count Yarns on Vortex Spinning System, Istanbul Technical University, Doktora Tezi, İstanbul.
  • [19] Leitner, H., Schwippl H., and Baldischwieler, O., 2010. Air-jet Spinning – Yarns & Fabrics Compared to Established Spinning Systems, Proceedings of the XIIth International Izmir Textile & Apparel Symposium, October 28–30, Izmir, Turkey.
  • [20] Erdumlu, N., Özipek B., Oxenham W., 2012. Vortex Spinning Technology, Textile Progress, 44:3-4, 141-174, DOI: 10.1080/00405167.2012.739345
Year 2016, Volume: 20 Issue: 2, 0 - , 27.05.2016

Abstract

References

  • [1] Oxenham, W., 2000. Fasciated Yarns-A Revolutionary Development. Journal of Textile Apparel Technology Management (JTATM), Sayı 1, No 2, 1-7.
  • [2] Soe, A.K., Takahashi, M., Nakajima, M., 2004. Structure And Properties Of MVS Yarns In Comparison With Ring Yarns And Open End Rotor Spun Yarns. Textile Research Journal, 74 (9), 819-826.
  • [3] Örtlek, G., Ülkü, Ş., 2005a. Effect of Some Variables on Properties of 100% Cotton Vortex Spun Yarns. Textile Research Journal, 75 (6)0, 458-461.
  • [4] Başal, G., Oxenham, W., 2003. Vortex Spun Yarns VS. Air-Jet Spun Yarn. AUTEX Research Journal, 3 (3), 96-100.
  • [5] Rameshkumar, C., Anandkumar, P., Senthilnathan, P., Jeevitha, R., Anbumani, N., 2008. Comparitive Studies On Ring Rotor And Vortex Yarn Knitted Fabrics0, AUTEX Research Journal, Vol. 80, No 4, December 2008, s. 100-106.
  • [6] Kılıç, M., Okur, A., 2011. The properties of cotton-Tencel and cotton-Promodal blended yarns spun in different spinning systems, Textile Research Journal, 81(2), 156–172.
  • [7] Tyagi, G.K., Sharma, D., 2004. Performance and Low-Stress Characteristics Of Polyester-Cotton MVS Yarns. Indian Journal of Fibre&Textile Research, 29, 301-307.
  • [8] Örtlek, G., Ülkü, Ş., 2005b. Pilling And Abrasion Performances Of Murata Vortex Spun Cotton Yarns. Melliand International, 11, 4/2005, 1-3.
  • [9] Gordon, S., 2001. The Effect Of Short Fibre And Nep Levels On Murata Vortex Spinning Efficiency And Product Quality. www.tft.csiro.au. Erişim Tarihi: 11.07.2007.
  • [10] Beceren, Y., Nergis, B.U., 2008. Comparison of the Effects of Cotton Yarns Produced by New, Modified and Conventional Spinning Systems on Yarn and Knitted Fabric Performance, Textile Research Journal, 78 (4), s. 297–330, DOI: 10.1177/0040517507084434.
  • [11] Erdumlu, N., Özipek, B., Öztuna, A.S., Çetinkaya, S., 2009. Investigation Of Vortex Spun Yarn Properties In Comparison With Conventional Ring And Open-End Rotor Spun Yarns. Textile Research Journal, 79 (7), 585-595.
  • [12] Karalı, K., Sakarya, S., Yılmaz, D., 2009. Vortex İplik Eğirme Sisteminin, Konvansiyonel Ring Ve Kompakt İplik Eğirme Sistemleriyle İplik Ve Kumaş Performansı Açısından Karşılaştırılması, Tekstil Teknik Dergisi, Sayı 297, Ekim, s. 96-109.
  • [13] Tyagi, G.K., Sharma, D., Salhotra, K.R., 2004a. Process-Structure-Property Relationship Of Polyester-Cotton MVS Yarns: Part I-Influence Of Processing Variables On Yarn Structural Parameters. Indian Journal of Fibre&Textile Research, 290, 419-428.
  • [14] Tyagi, G.K., Sharma, D., Salhotra, K.R., 2004b. Process-Structure-Property Relationship Of Polyester-Cotton MVS Yarns: Part II-Influence Of Process Variables On Yarn Characteristics. Indian Journal of Fibre&Textile Research, 290, 429-435.
  • [15] Başal, G., Oxenham, W., 2006. Effects Of Some Process Parameters On The Structure And Properties Of Vortex Spun Yarn. Textile Research Journal, 76 (6), 492-499.
  • [16] Örtlek, H.G., 2006. Influence of Selected Process Variables on the Mechanical Properties of Core-Spun Vortex Yarns Containing Elastane, Fibres & Textiles in Eastern Europe, July / September, Vol. 14, No. 3 (57), s. 42-44.
  • [17] Zhuanyong Z., Shaoming Z., Longdi C., Bojun X., Jiangwei Y., 2014. Effect of Some Variables on the Fibre Packing Pattern in a Yarn Cross-section for Vortex Spun Yarn, Fibres & Textiles in Eastern Europe, Vol. 22, No. 2(104), 40-46.
  • [18] Erdumlu N., 2011. An Approach to İnvestigate the Spinnability of Fine Count Yarns on Vortex Spinning System, Istanbul Technical University, Doktora Tezi, İstanbul.
  • [19] Leitner, H., Schwippl H., and Baldischwieler, O., 2010. Air-jet Spinning – Yarns & Fabrics Compared to Established Spinning Systems, Proceedings of the XIIth International Izmir Textile & Apparel Symposium, October 28–30, Izmir, Turkey.
  • [20] Erdumlu, N., Özipek B., Oxenham W., 2012. Vortex Spinning Technology, Textile Progress, 44:3-4, 141-174, DOI: 10.1080/00405167.2012.739345
There are 20 citations in total.

Details

Primary Language Turkish
Journal Section Makaleler
Authors

Demet Yılmaz

Gizem Kayabaşı This is me

Publication Date May 27, 2016
Published in Issue Year 2016 Volume: 20 Issue: 2

Cite

APA Yılmaz, D., & Kayabaşı, G. (2016). Lif Türü ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 20(2). https://doi.org/10.19113/sdufbed.71091
AMA Yılmaz D, Kayabaşı G. Lif Türü ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi. SDÜ Fen Bil Enst Der. August 2016;20(2). doi:10.19113/sdufbed.71091
Chicago Yılmaz, Demet, and Gizem Kayabaşı. “Lif Türü Ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 20, no. 2 (August 2016). https://doi.org/10.19113/sdufbed.71091.
EndNote Yılmaz D, Kayabaşı G (August 1, 2016) Lif Türü ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 20 2
IEEE D. Yılmaz and G. Kayabaşı, “Lif Türü ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi”, SDÜ Fen Bil Enst Der, vol. 20, no. 2, 2016, doi: 10.19113/sdufbed.71091.
ISNAD Yılmaz, Demet - Kayabaşı, Gizem. “Lif Türü Ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi 20/2 (August 2016). https://doi.org/10.19113/sdufbed.71091.
JAMA Yılmaz D, Kayabaşı G. Lif Türü ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi. SDÜ Fen Bil Enst Der. 2016;20. doi:10.19113/sdufbed.71091.
MLA Yılmaz, Demet and Gizem Kayabaşı. “Lif Türü Ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi”. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol. 20, no. 2, 2016, doi:10.19113/sdufbed.71091.
Vancouver Yılmaz D, Kayabaşı G. Lif Türü ve İplik İnceliğinin Vortex İplik Özelliklerine Etkisinin İncelenmesi. SDÜ Fen Bil Enst Der. 2016;20(2).

e-ISSN: 1308-6529