Research Article
BibTex RIS Cite

Sanayi 4.0: Türkiye Açısından Fırsatlar ve Tehditler

Year 2018, , 245 - 252, 30.04.2018
https://doi.org/10.17233/sosyoekonomi.2018.02.15

Abstract

Mekanizasyon, elektrik ve IT (bilgi teknolojileri)’nin ardından yeni bir sanayi devrimi olarak Endüstri 4.0, insanı üretim sürecinden çıkararak, kas gücüne değil, beyin gücüne dayalı bir üretim sistemini getirmiştir. İlk kez 2013 yılında Almanya’da kullanılan Endüstri 4.0, ülkemiz için çok uzak bir kavram değildir. Fakat hala bu alanda almamız gereken çok yol bulunmaktadır. Bu çalışmada Endüstri 4.0 kavramı açıklanmış, ardından Türkiye’nin Endüstri 4.0 sürecindeki tehditler ve fırsatları hakkında bilgi verilmiştir.

References

  • Abersfelder, S. & E. Bogner & A. Heyder & J. Frankel (2016), “Application and validation of an existing Industry 4.0 guideline for the development of specific recommendations for implementation”, Advanced Materials Research, 1140, 465-472.
  • ACATECH - National Academy of Science and Engineering (2013), Recommendations for implementing the strategic initiative Industrie 4.0, ACATECH - National Academy of Science and Engineering, <http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/ro ot/de/Material_fuer_Sonderseiten/Industrie_4.0/Final_report__Industrie_4.0_accessible.p df>, 04.05.2017.
  • Albers, A. & B. Gladysz & T. Pinner & V. Butenko & T. Stürmlinger (2016), “Procedure for defining the system of objectives in the initial phase of an industry 4.0 project focusing on intelligent quality control systems”, Procedia CIRP, (52), 262-267.
  • Almada-Lobo, F. (2015), “The Industry 4.0 revolution and the future of Manufacturing Execution Systems (MES)”, Journal of Innovation Management, 3(4), 16-21.
  • Bozkurt, R. (2016), Endüstri 4.0 Aşaması Türkiye’de Yeni İşler Yaratmak İçin Büyük Fırsattır, <http://www.dunya.com/sirketler/039endustri-40-asamasi-turkiyede-yeni-isler-yaratmakicin-buyuk-haberi-319455>, 08.05.2017.
  • Branke, J. & S. Farid & N. Shah (2016), “Industry 4.0 - A Vision also for personalized medicine supply chains?”, Cell and Gene Therapy Insights, 2(2), 263-270.
  • Gubán, M. & G. Kovács (2017), “Industry 4.0 Conception”, Acta Technica Corviniensis Bulletin of Engineering, 10(1), 111.
  • Hassabis, D. (2016), Artificial Intelligence and the Future, 24-26 th February, The Sheldonian Theatre, Oxford University, Oxford, UK.
  • Ivanov, D. & A. Dolgui & B. Sokolov & F. Werner & M. Ivanova (2016), “A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0.”, International Journal of Production Research, 54(2), 386-402.
  • Lydon, B. (2016), “Industry 4.0: Intelligent and flexible product”, Intech, May/June.
  • Mersin Ticaret ve Sanayi Odası (2017), Türkiye, Avrasya’nın Endüstri 4.0 Merkezi Olabilir, <http://www.mtso.org.tr/tr/haberler/turkiye-avrasya-nin-endustri-4-0-merkezi-olabilir>, 08.05.2017.
  • Mosterman, P. & J. Zanter (2016), “Industry 4.0 as a Cyber-Physical System Study”, J. Softw Syst Model, 15(1), 17-29.
  • Özata, F. (2016), Türkiye, Endüstri 4.0 ile Dünya Devi Olacak, <http://www.yenisafak.com/teknoloji/turkiye-endustri-40-ile-dunya-devi-olacak2568622>, 08.05.2017.
  • Roblek, V. & M. Mesko & A. Krapez (2016), “A Complex View of Industry 4.0”, SAGE Open, 6(2), 1-11.
  • Şuman, N. (2017), Akıllı Üretim Çağı: Endüstri 4.0, <http://www.fortuneturkey.com/akilli-uretimcagi-endustri-40-42841>, 08.05.2017.
  • Suri, K. & A. Cuccuru & J. Cadavid & S. Gerard & W. Gaaloul & S. Tata (2017), “Model-Based development of modular complex systems for accomplishing system integration for Industry 4.0”, 5 th International Conference on Model-Driven Engineering and Software Development (MODELSWARD 2017), Feb. 2017, Porto, Portugal.
  • Hürriyet Gazetesi (2017), Endüstri 4.0 Türkiye’yi Büyütecek!, <http://www.hurriyet.com.tr/siemensturkiye-endustri-4-0i-anlatti-40286803>, 08.05.2017.
  • Turkish Time Dergisi (2015), Endüstri 4.0, <http://www.turkishtimedergi.com/genel/endustri-4-0/>, 08.05.2017.
  • Yüzak, Ö. (2016), Endüstri 4.0… Dünya… Türkiye…, <http://www.cumhuriyet.com.tr/koseyazisi/632227/Endustri_4.0..._Dunya..._Turkiye....h tml#>, 08.05.2017.

Industry 4.0: Chances and Threats from the Point of Turkey

Year 2018, , 245 - 252, 30.04.2018
https://doi.org/10.17233/sosyoekonomi.2018.02.15

Abstract

As a new industrial revolution following mechanization, electricity and IT, Industry 4.0 has brought a production system based on the brain power, not the muscle power, by removing the human from the production process. Industry 4.0, which was first used in Germany in 2013, is not a very distant concept for our country. But there are still many ways to get to this area. In this study, the concept of Industry 4.0 was explained, followed by information on Turkey's threats and opportunities during the Industry 4.0 process.

References

  • Abersfelder, S. & E. Bogner & A. Heyder & J. Frankel (2016), “Application and validation of an existing Industry 4.0 guideline for the development of specific recommendations for implementation”, Advanced Materials Research, 1140, 465-472.
  • ACATECH - National Academy of Science and Engineering (2013), Recommendations for implementing the strategic initiative Industrie 4.0, ACATECH - National Academy of Science and Engineering, <http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/ro ot/de/Material_fuer_Sonderseiten/Industrie_4.0/Final_report__Industrie_4.0_accessible.p df>, 04.05.2017.
  • Albers, A. & B. Gladysz & T. Pinner & V. Butenko & T. Stürmlinger (2016), “Procedure for defining the system of objectives in the initial phase of an industry 4.0 project focusing on intelligent quality control systems”, Procedia CIRP, (52), 262-267.
  • Almada-Lobo, F. (2015), “The Industry 4.0 revolution and the future of Manufacturing Execution Systems (MES)”, Journal of Innovation Management, 3(4), 16-21.
  • Bozkurt, R. (2016), Endüstri 4.0 Aşaması Türkiye’de Yeni İşler Yaratmak İçin Büyük Fırsattır, <http://www.dunya.com/sirketler/039endustri-40-asamasi-turkiyede-yeni-isler-yaratmakicin-buyuk-haberi-319455>, 08.05.2017.
  • Branke, J. & S. Farid & N. Shah (2016), “Industry 4.0 - A Vision also for personalized medicine supply chains?”, Cell and Gene Therapy Insights, 2(2), 263-270.
  • Gubán, M. & G. Kovács (2017), “Industry 4.0 Conception”, Acta Technica Corviniensis Bulletin of Engineering, 10(1), 111.
  • Hassabis, D. (2016), Artificial Intelligence and the Future, 24-26 th February, The Sheldonian Theatre, Oxford University, Oxford, UK.
  • Ivanov, D. & A. Dolgui & B. Sokolov & F. Werner & M. Ivanova (2016), “A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0.”, International Journal of Production Research, 54(2), 386-402.
  • Lydon, B. (2016), “Industry 4.0: Intelligent and flexible product”, Intech, May/June.
  • Mersin Ticaret ve Sanayi Odası (2017), Türkiye, Avrasya’nın Endüstri 4.0 Merkezi Olabilir, <http://www.mtso.org.tr/tr/haberler/turkiye-avrasya-nin-endustri-4-0-merkezi-olabilir>, 08.05.2017.
  • Mosterman, P. & J. Zanter (2016), “Industry 4.0 as a Cyber-Physical System Study”, J. Softw Syst Model, 15(1), 17-29.
  • Özata, F. (2016), Türkiye, Endüstri 4.0 ile Dünya Devi Olacak, <http://www.yenisafak.com/teknoloji/turkiye-endustri-40-ile-dunya-devi-olacak2568622>, 08.05.2017.
  • Roblek, V. & M. Mesko & A. Krapez (2016), “A Complex View of Industry 4.0”, SAGE Open, 6(2), 1-11.
  • Şuman, N. (2017), Akıllı Üretim Çağı: Endüstri 4.0, <http://www.fortuneturkey.com/akilli-uretimcagi-endustri-40-42841>, 08.05.2017.
  • Suri, K. & A. Cuccuru & J. Cadavid & S. Gerard & W. Gaaloul & S. Tata (2017), “Model-Based development of modular complex systems for accomplishing system integration for Industry 4.0”, 5 th International Conference on Model-Driven Engineering and Software Development (MODELSWARD 2017), Feb. 2017, Porto, Portugal.
  • Hürriyet Gazetesi (2017), Endüstri 4.0 Türkiye’yi Büyütecek!, <http://www.hurriyet.com.tr/siemensturkiye-endustri-4-0i-anlatti-40286803>, 08.05.2017.
  • Turkish Time Dergisi (2015), Endüstri 4.0, <http://www.turkishtimedergi.com/genel/endustri-4-0/>, 08.05.2017.
  • Yüzak, Ö. (2016), Endüstri 4.0… Dünya… Türkiye…, <http://www.cumhuriyet.com.tr/koseyazisi/632227/Endustri_4.0..._Dunya..._Turkiye....h tml#>, 08.05.2017.
There are 19 citations in total.

Details

Primary Language Turkish
Journal Section Articles
Authors

Kazım Can Koca This is me 0000-0002-5585-4113

Publication Date April 30, 2018
Submission Date June 1, 2017
Published in Issue Year 2018

Cite

APA Koca, K. C. (2018). Sanayi 4.0: Türkiye Açısından Fırsatlar ve Tehditler. Sosyoekonomi, 26(36), 245-252. https://doi.org/10.17233/sosyoekonomi.2018.02.15
AMA Koca KC. Sanayi 4.0: Türkiye Açısından Fırsatlar ve Tehditler. Sosyoekonomi. April 2018;26(36):245-252. doi:10.17233/sosyoekonomi.2018.02.15
Chicago Koca, Kazım Can. “Sanayi 4.0: Türkiye Açısından Fırsatlar Ve Tehditler”. Sosyoekonomi 26, no. 36 (April 2018): 245-52. https://doi.org/10.17233/sosyoekonomi.2018.02.15.
EndNote Koca KC (April 1, 2018) Sanayi 4.0: Türkiye Açısından Fırsatlar ve Tehditler. Sosyoekonomi 26 36 245–252.
IEEE K. C. Koca, “Sanayi 4.0: Türkiye Açısından Fırsatlar ve Tehditler”, Sosyoekonomi, vol. 26, no. 36, pp. 245–252, 2018, doi: 10.17233/sosyoekonomi.2018.02.15.
ISNAD Koca, Kazım Can. “Sanayi 4.0: Türkiye Açısından Fırsatlar Ve Tehditler”. Sosyoekonomi 26/36 (April 2018), 245-252. https://doi.org/10.17233/sosyoekonomi.2018.02.15.
JAMA Koca KC. Sanayi 4.0: Türkiye Açısından Fırsatlar ve Tehditler. Sosyoekonomi. 2018;26:245–252.
MLA Koca, Kazım Can. “Sanayi 4.0: Türkiye Açısından Fırsatlar Ve Tehditler”. Sosyoekonomi, vol. 26, no. 36, 2018, pp. 245-52, doi:10.17233/sosyoekonomi.2018.02.15.
Vancouver Koca KC. Sanayi 4.0: Türkiye Açısından Fırsatlar ve Tehditler. Sosyoekonomi. 2018;26(36):245-52.