Determination of Suitable Solvents for Extraction of Different Fruit Parts of Bitter Melon (Momordica charantia L.)

Year 2016, Volume: 9 Issue: 1, 18 - 22, 01.02.2016

Yusuf Savsatlı Fatih Seyis

Abstract

This study was conducted to determine suitable solvents in regard to extract rate for extraction of different parts of ripe and unripe fruits in bitter
melon (Momordica charantia L.) grown in Pazar/Rize conditions in the Black Sea Region. The fruit parts of the plant were separately assessed
for extraction with solvents, methanol, ethanol and hexane. The extract values (g/g) obtained by solvent extraction in 2014 were determined
as percentage. Significant differences were found on the performance of solvents used in extraction depending on the ripeness condition of
fruits. Among the fruit sections, the highest (p<0.01) extract rate was obtained from seed coat of ripe fruits through methanolic (73.7 %) and
ethanolic (68.5 %) extraction. On the other hand, for the seed coat of unripe fruits, the highest extract rate (16.9 %) was determined in only
methanolic extraction. The highest extract rate was obtained from ethanol with 35.1 % (P<0.01) for seeds of ripe fruits. On the other hand, the
highest extract rate (p<0.05) for seeds of unripe fruits was obtained with methanol and hexane, 27.7 % and 21.3 % respectively. Methanol was
the best one (p<0.01) among the solvents used in extraction of fleshy parts of both ripe and unripe fruits, and extract rates occurred as 41.3 %
and 34.8 % respectively. The results obtained from the study showed that, among the solvents for high extract yield, ethanol could be used for
extraction of ripe seed and methanol for other fruit sections

Keywords

Fruit sections, extract rate, seed coat