Akıllı evler geleceğin tasarım kavramları arasında olmaktan çıkmıştır. Günümüzde, içinde yaşayanların yaşam tarzlarını doğrudan etkileyen evler tasarlanmaktadır. Akıllı ev sistemlerinin amacı, tanımlanmış aktivitelerin farkında olan bir ortam yaratmaktır. Engelli insanlar günlük hayatlarını kolaylaştırmak için bu sistemlere ihtiyaç duymaktadırlar. Bu çalışmada engelli insanların hayatlarını kolaylaştırmak amacıyla farklı engel türleri için duyarga ağları ile bazı akıllı ev uygulamaları geliştirilmiştir. Tasarlanan sistem, karar alma süreçlerinin merkez düğümde yapıldığı ve önceden tanımlanmış görevleri yerine getiren diğer düğümleri içeren bir yıldız ağ mimarisinden oluşmaktadır. Tmote Sky duyarga düğümleri kullanarak oluşturulan test ortamında üç temel senaryo gerçeklenmiş ve başarım testleri sonucunda sistemin doğru kararlar verdiği görülmüştür. Gerçeklenen sistemler otomatik kapı kontrol sistemi, gaz kaçağı algılama sistemi ve işitme engelli insanları uyarı sistemidir. Bu makalede sistemin genel çalışma prensipleri ve senaryolar anlatılmıştır.
Smart homes are no longer design concepts of the future. They are being built now, and having a direct impact on the lifestyles of people living in them. The aim of smart home systems is to create an environment that is aware of the activities taking place within it. Disabled people may benefit from such systems to make their life easier. In this study, we designed a wireless sensor network based smart home system for different kinds of disabilities. The system consists of a star network with a sink node at the center responsible for decision processes and different sensor nodes with pre-defined tasks responsible for actuations. We developed a real testbed with Tmote Sky motes for the realization of three basic actuations; an intelligent door control system, gas leakage detection and warning system. The whole system is tested against failures for several times and 100% success is observed.
Other ID | JA37HM79RR |
---|---|
Journal Section | Makaleler(Araştırma) |
Authors | |
Publication Date | June 24, 2016 |
Published in Issue | Year 2011 Volume: 4 Issue: 1 - Volume: 4 Issue: 1 |
Article Acceptance
Use user registration/login to upload articles online.
The acceptance process of the articles sent to the journal consists of the following stages:
1. Each submitted article is sent to at least two referees at the first stage.
2. Referee appointments are made by the journal editors. There are approximately 200 referees in the referee pool of the journal and these referees are classified according to their areas of interest. Each referee is sent an article on the subject he is interested in. The selection of the arbitrator is done in a way that does not cause any conflict of interest.
3. In the articles sent to the referees, the names of the authors are closed.
4. Referees are explained how to evaluate an article and are asked to fill in the evaluation form shown below.
5. The articles in which two referees give positive opinion are subjected to similarity review by the editors. The similarity in the articles is expected to be less than 25%.
6. A paper that has passed all stages is reviewed by the editor in terms of language and presentation, and necessary corrections and improvements are made. If necessary, the authors are notified of the situation.
. This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.