Abstract
Some problems occur especially in respect of wearing and aesthetic comfort, when different metals are used, bare or hybrid yarn form to produce functional fabrics. The aim of this study is to investigate the physical properties of hybrid yarns containing copper wire which are produced with 5 different production methods at three different twist levels. In this study, tenacity, breaking elongation and Young modulus values of hybrid yarns were evaluated comparatively. Also copper visibility ratio (CVR) values of hybrid yarns on the fabric surface were determined by using image thresholding method in CIELab color space.
References
- Depla, D., Segers, S., Leroy, W., Hove, T. V. and Parys, M. V., (2011), Smart Textiles: An Explorative Study of The Use of Magnetron Sputter Deposition, Textile Research Journal, 81(17), 1808–1817.
- Örtlek H, G., Kılıç G., Okyay G., Bilget Ö., (2011), Investigation of Different Ring Spinning Methods for Producing Core Spun Yarns Containing Stainless Steel Wire, Tekstil ve Konfeksiyon, vol.21, pp. 225-235.
- Baxes, G. A., (1994), Digital Image Processing, Principles And Applications, John Wiley&Sons, Inc., 452s.
- Yaman, K., Sarucan, A., Atak, M., Aktürk, N., (2001), Preparation Of Data For Dynamic Scheduling Using Image Processing And Arima Models, The Magazine of Gazi Uni- versity Engineering and Architecture Faculty, 16(1), 19-40.
- Gonzales, C. R., Woods E. R., Eddins L. S., (2009), Digital Image Processing Using Matlab, Prentice Hall, 597s. master’s thesis), Istanbul Technical University, İstanbul, 7- 9.
- http://www.brucelindbloom.com, June, 2011.
Abstract
Fonksiyonel kumaşların üretiminde metal teller, çıplak ya da kompozit iplik formunda kullanıldıklarında, özellikle giyim ve estetik konforla ilgili çeşitli problemlere neden olmaktadır. Bu çalışmanın amacı, üç farklı büküm/sarım seviyesinde, beş farklı üretim tekniği ile üretilmiş bakır tel içerikli kompozit ipliklerin fiziksel özelliklerinin değerlendirilmesidir. Çalışmada üretilen farklı tiplerdeki kompozit ipliklerin özgül gerilme, kopma uzaması, Young modülü değerleri karşılaştırmalı olarak incelenmiştir. Ayrıca, kompozit ipliklerin kumaş yüzeyindeki bakır görünürlük oranı değerleri CIELab renk uzayında görüntü eşikleme metodu kullanılarak belirlenmiştir.
References
- Depla, D., Segers, S., Leroy, W., Hove, T. V. and Parys, M. V., (2011), Smart Textiles: An Explorative Study of The Use of Magnetron Sputter Deposition, Textile Research Journal, 81(17), 1808–1817.
- Örtlek H, G., Kılıç G., Okyay G., Bilget Ö., (2011), Investigation of Different Ring Spinning Methods for Producing Core Spun Yarns Containing Stainless Steel Wire, Tekstil ve Konfeksiyon, vol.21, pp. 225-235.
- Baxes, G. A., (1994), Digital Image Processing, Principles And Applications, John Wiley&Sons, Inc., 452s.
- Yaman, K., Sarucan, A., Atak, M., Aktürk, N., (2001), Preparation Of Data For Dynamic Scheduling Using Image Processing And Arima Models, The Magazine of Gazi Uni- versity Engineering and Architecture Faculty, 16(1), 19-40.
- Gonzales, C. R., Woods E. R., Eddins L. S., (2009), Digital Image Processing Using Matlab, Prentice Hall, 597s. master’s thesis), Istanbul Technical University, İstanbul, 7- 9.
- http://www.brucelindbloom.com, June, 2011.
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Articles |
| Authors | |
| Publication Date | December 13, 2013 |
| Published in Issue | Year 2013 |